DDTC113TLP 50V NPN PRE-BIASED SMALL SIGNAL TRANSISTOR IN DFN1006 Product Summary Part Number DDTC113TLP Mechanical Data R1 (NOM) 1kΩ Marking N4 Features Epitaxial Planar Die Construction Ultra-Small Leadless Surface Mount Package Ideally Suited for Automated Assembly Processes Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Case: X1-DFN1006-3 Case Material: Molded Plastic. "Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - NiPdAu Solderable per MIL-STD-202, Method 208 e4 Weight: 0.0009 grams (Approximate) X1-DFN1006-3 B 1 C C 3 B IN C B 1 1 E E 10 KÙ 3 E 2 OUT GND 2 Bottom View Top View Pin-Out Equivalent Inverter Circuit Device Symbol Ordering Information (Note 4) Product DDTC113TLP-7 DDTC113TLP-7B Notes: Marking N4 N4 Reel size (inches) 7 7 Tape width (mm) 8 8 Quantity per reel 3,000 10,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com. Marking Information From date code 1527 (YYWW), this changes to: Top View Bar Denotes Base and Emitter Side N4 N4 N4 N4 Top View Dot Denotes Collector Side N4 DDTC113TLP-7 N4 N4 N4 N4 N4 = Product Type Marking Code DDTC113TLP Document number: DS30843 Rev. 9 - 2 N4 N4 N4 DDTC113TLP-7B Top View Bar Denotes Base and Emitter Side 1 of 5 www.diodes.com May 2015 © Diodes Incorporated DDTC113TLP Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Symbol VCC VIN IC(MAX) Supply Voltage Input Voltage Output Current (IO) Value 50 -5 to +10 100 Unit V V mA Symbol PD Pder Value 250 2 Unit mW mW°C RJA 500 °C/W TJ, TSTG -55 to +150 °C Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Power Dissipation (Note 5) Power Derating above +25°C Thermal Resistance, Junction to Ambient Air (Note 5) (Equivalent to one heated junction of NPN) Operating and Storage Temperature Range Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic OFF CHARACTERISTICS (Note 6) Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Base Cutoff Current Emitter-Base Cutoff Current ON CHARACTERISTICS (Note 6) DC Current Gain Collector-Emitter Saturation Voltage Input Resistance SMALL SIGNAL CHARACTERISTICS Current Gain-Bandwidth Product Symbol Min Typ Max Unit BVCBO BVCEO BVEBO ICBO IEBO 50 50 5 0.1 0.1 V V V µA µA IC = 50µA, IE = 0 IC = 1mA, IB = 0 IE = 50µA, IC = 0 VCB = 50V, IE = 0 VEB = 4V, IC = 0 hFE VCE(sat) R1 100 0.7 380 1 600 0.25 1.3 V kΩ VCE = 5V, IC = 1mA IC = 50mA, IB = 2.5mA fT 250 MHz Notes: Test Condition VCE = 10V, IE = 5mA, f = 100MHz 5. For the device mounted on minimum recommended pad layout 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in steady state condition. The entire exposed collector pad is attached to the heatsink. 6. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2%. DDTC113TLP Document number: DS30843 Rev. 9 - 2 2 of 5 www.diodes.com May 2015 © Diodes Incorporated DDTC113TLP 300 800 P D, POWER DI SSI PATION (mW) 700 250 600 200 500 400 150 100 50 RJA = 500 C/W 0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Dissipation vs. Ambient Temperature (Note 5) 0.25 0.15 0.1 0.05 IC, COLLECTOR CURRENT (A) 0.2 0.12 0.10 0.08 0.06 0.04 0.02 0 0.0 0 1 2 3 5 6 4 VCE, COLLECTOR-EMITTER VOLTAGE (V) Fig. 4 Typical Collector Current vs. Collector-Emitter Voltage 10 7 6 5 1 4 3 0.1 2 1 0 DDTC113TLP Document number: DS30843 Rev. 9 - 2 0.01 3 of 5 www.diodes.com 0 0.2 0.4 0.6 0.8 1 1.2 1.4 May 2015 © Diodes Incorporated DDTC113TLP Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A A1 Seating Plane D b Pin #1 ID e E b2 X1-DFN1006-3 Dim Min Max Typ A 0.47 0.53 0.50 A1 0.00 0.05 0.03 b 0.10 0.20 0.15 b2 0.45 0.55 0.50 D 0.95 1.075 1.00 E 0.55 0.675 0.60 e 0.35 L1 0.20 0.30 0.25 L2 0.20 0.30 0.25 L3 0.40 z 0.02 0.08 0.05 All Dimensions in mm z L3 L2 L1 Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. C Y Dimensions C G1 G2 X X1 Y Y1 Y1 G2 X G1 Value (in mm) 0.70 0.30 0.20 0.40 1.10 0.25 0.70 X1 DDTC113TLP Document number: DS30843 Rev. 9 - 2 4 of 5 www.diodes.com May 2015 © Diodes Incorporated DDTC113TLP IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com DDTC113TLP Document number: DS30843 Rev. 9 - 2 5 of 5 www.diodes.com May 2015 © Diodes Incorporated