FSM-100P+

SPECIFICATION
Description
For
Telecommunication
Large diameter
Applicable
fiber
type of fibers
PM fiber
Clad diameter
Coating diameter
FSM-100M+
FSM-100P+
SMF(ITU-T G652), NZDSF(ITU-T G655),
MMF(ITU-T G651), EDF, DCF and other specialty fibers.
Conventional silica LDF
PMF
φ 60 to 1200 µm
φ 60 to 2000 µm
Glass clamp:8 to 30 mm (standard 9mm)
Coating clamp:3 to 5 mm (standard 4mm)
Cleave length
Typically
splice loss
Splice time
Typically
splice loss
Return loss
Specialty Fiber Fusion Splicers
SPECIFICATION
SMF
NZDSF/LDF
MMF
PMF
SMF/MMF
NZDSF/LDF
PMF(PANDA)
PM AUTO
PMF(PANDA)
PM AUTO
FP-03 40 mm
FP-03 60 mm
Tube heat time
FPS01 series
(micro sleeve)
Fiber clamp
Sweep range
Z-axis holder base position
adjustment system
End view fiber observation system
Electrode life
Electrode gap
Electrode oscillating function
0.03 dB
0.05 dB
0.02 dB
0.06 dB
15 sec
25 sec
35 to 50 sec
70 to 300 sec
-40 dB / 0.6 degree
-40 dB / 0.6 degree
>> 60 dB
30 sec
35 sec
55 sec *Heat time change with depended on type of micro sleeve
If changes according to cladding diameter and coating
diameter automatically
± 18 mm (the arc center is 0mm.)
Available
Available
2500 arc discharges.
(at the SMF (ITU-T G.652) splicing with 1mm electrode gap)
1.0 to 3.0 mm (adjustable)
Available
Description
Electrode offset
Proof test
Magnification
Auto start function
Number of splice
mode
Standard mode
Splicing
Manual mode
mode
Endview Mode
Power meter mode
Attenuation mode
Number of tube heating mode
Storage of splicing result
Language
Arc power calibration
Arc position calibration
Fiber learning function
Software upgrade
Display image data
PC
Splice conditions
communication
Splice results
PC control
Display
Dimensions
Weight
Power supply
Operating condition
Storage condition
Terminals
FSM-100M+
FSM-100P+
-0.3 to +0.1 mm (adjustable)
1.96 to 2.45 N
3.5 to 300 (changeable)
Available
Total 300 modes
Available
Available
Available
Available
Available
100 heating mode installed
The last 2000 result to be stored in the internal memory.
English / Japanese / Chinese
3 methods installed
2 methods installed
Available
Cable via internet
Capable
Capable
Capable
Capable Splice software and command list is available.
Dual 4.1”inches color LCD monitor.
470 (W) × 232 (D) × 160 (H) mm excluding rubber foot
8.0 kg
9.5 kg
External AC adapter : ADC-15
Input : AC100 to 240V (50 to 60Hz) (max. 100 W AC)
0 to 95%RH and 0 to 40 degC respectively
0 to 95%RH and -40 to 80 degC respectively
Power supply : DC19 V 4.5 A
USB2.0(Mini-B type) for PC communication
IEEE-488 24pin for power monitor feedback alignment
Two 6-pin Mini-DIN connector for external equipment (HJS-02)
Standard Package
Standard Package
FSM-100M+
Qty.
1pc
1pc
1pair
FSM-100P+
Qty.
1pc
1pc
1pair
1pair
1pair
-
1pair
FH-100-400-EV
-
1pair
ADC-15
ACC-**
EV-LS01
ELCT3-25-LDF
USB-01
DCS-01
EC-01
W-100MP-E
SR-01-E
M-100MP-E
1pc
1pc
2pcs
1pair
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
2pcs
1pair
1pc
1pc
1pc
1pc
1pc
1pc
Name
Model
Splicer Main Body
Carrying Case
Fiber Holder for 250 µm
Fiber Holder (250 µm coating diameter)
for End-view
Fiber Holder for 400 µm
Fiber Holder (400 µm coating diameter)
for End-view
AC Adapter
AC Power Cord for AC adapter
End-view Light Source
Spare Electrodes for LDF
USB Cable
Dust Cleaning Stick
Electrode Cleaner
Warnings and Cautions
Splicing Report
Instruction Manual
FSM-100M+
FSM-100P+
CC-27
FH-100-250
FH-100-250-EV
FH-100-400
FSM-100M+ /100P+
End view fiber observation system
X-LDF (Extra Large Diameter Fiber) splicing
Patented “Split V-groove” clamping system
“Plasma Zone” fiber positioning
Short cleave length
Special arc calibration
Dual splice loss estimation
Enhanced sweep arc
Internet firmware update & interface
Production environment friendly design
Zero degree fiber holder position
Fiber profile learning function
ACC-**
ADC-15
Dual PM alignment method (FSM-100P+ Only)
EV-LS01
FH-100-250-EV
FH-100-400-EV(FSM-100P+only)
EC-01
FSM-100M+/P+
Optional Items
Item
Fiber Holder
End-view mirror
Cleaver
Angle Cleaver
Jacket Stripper
Hot Jacket Stripper
Ultrasonic Cleaner
Recoater & Proof tester
Sleeve
Micro Sleeve
Model
FH-100-***
FH-100-***-EV
FH-40-LT900
EVM-01
CT-100
CT-32
CT-38
CT-10
CT-30
CT-11
JS-02-900
JS-01
HJS-02
USC-02
FSR-02
FP-03
FP-04S
FPS01-400-**
FPS01-900-**
Note
***:Coating diameter
060, 100, 125, 150, 180, 210, 250, 300, 350, 400, 500,
600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500,
1600, 1700, 1800, 1900, 2000 µm
※ -EV is fiber holder for End-view observation system.
Coating Dia. : 900 µm for loose tube
Spare End-view mirror
Cladding Dia. : 80 to 400 µm, Cleave length : 0 to 40 mm
Cladding Dia. : 125 µm, Cleave length : 4 mm / 9 mm
Cladding Dia. : 80 µm, Cleave length : 4 mm / 9 mm
Cladding Dia. : 125 µm, Cleave length : 5 mm / 10 mm
Cladding Dia. : 125 µm, Cleave length : 5 mm / 10 mm
Cladding Dia. : 125 µm, Cleave length : 5 mm / 10 mm
Coating Dia. : 900 µm (applicable for fiber holder 900 µm)
Coating Dia. : 900 µm
Coating Dia. : 250 to 400 µm
60 mm
40 mm
12, 15, 20, 25, 34, 45 mm / Coating Dia. 400 µm
15, 20, 25, 34, 45 mm / Coating Dia. 900 µm
Specialty Fiber Fusion Splicer
Specifications and descriptions are subject to change without prior notice.
Fujikura Ltd.
1-5-1, Kiba, Koto-ku, Tokyo 135-8512, Japan
Phone : +81-3-5606-1164 Fax : +81-3-5606-1534
Fujikura Asia Ltd.
460, Alexandra Road, #22-02 PSA Bldg., Singapore 119963
Phone : +65-6-271-1312 Fax : +65-6-278-0965
http://www.fujikura.co.sg
Fujikura Europe Ltd.
C51 Barwell Buisiness Park, Leatherhead Road, Chessington, Surrey KT9 2NY, UK
Phone : +44-20+8240-2000 Fax : +44-20-8240-2010 http://www.fujikura.co.uk
AFL Telecommunications
260, Parkway East, Duncan, SC29334, USA
Phone : +1-800-235-3423 Fax : +1-800-926-0007
Fujikura (Shanghai) Trading Co., Ltd.
16th Floor, HSBC Tower,1000 Lujiazui Ring Road, Pudong, Shanghai 200120, China.
Phone : +86-21-6841-3636 Fax : +86-21-6841-2070 http://www.fujikura.com.cn
913・10-0733-142・95-00
FSM-100M+
Polarization Maintaining Fiber Fusion Splicer
FSM-100P+
http://www.fujikura.co.jp
http://www.afltele.com
Printed in Japan 1104-1104-2000-DNP
product line
Fujikura s new
splicers are engineered with a robust set of features that offer customers technology and reliability not available elsewhere. The need for
Accurate, Reliable, and Consistent splicing is expanding to new applications beyond telecommunications. These entirely new
fusion splicers from Fujikura
have been developed to provide the ultimate in performance and flexibility for a variety of customers and markets.
Additional information can be found at www.StateoftheARC.com website which is the central repository of information for all of
Fujikura s state of the arc fusion splicer products. Stay tuned to www.StateoftheARC.com for forthcoming additions to the
family of specialty fusion splicers where incremental capabilities will be revealed.
Specialty Fiber Fusion Splicer
Polarization Maintaining Fiber Fusion Splicer
FSM-100M+ FSM-100P+
Fujikura’s new specialty splicers FSM-100M+ and FSM-100P+ offer a host of innovative technology to address the rapidly expanding splicing needs for factory,
manufacturing, laboratory and R&D applications. These models are introduced as “
” splicers due to their unique capabilities to control the plasma
zone of the fusion arc. These capabilities will revolutionize the way users will splice various types of specialty fibers; LDF, low contrast PM, holey structured, etc.
End-view fiber observation system
60 µm
b
Split v-groove A
Certain type of fibers, such as Double-cladded fibers,
which light cannot be launched into cladding through
coating. Use external light source (EV-LS01) to launch light
directly into cladding.
Short cleave length
Special arc calibration
For minimizing the length of stripped fiber at splice point, FSM-100M+ and FSM100P+ can splice a short cleave length fiber.
This calibration technology facilitates an easy transfer of high end splicing
applications from R&D to production by ensuring consistent performance and
takes full advantage of Plasma Zone capabilities.
3mm
Fiber Coating
X-LDF (Extra Large Diameter Fiber) splicing
Specialty fibers,
especially for LDF
Melt-back arc calibration
Fiber Holder
Split v-groove
Electrode
Large diameter fibers up to 1200 µm cladding dia can
be spliced with air-cooled electrodes that oscillate up/
down during splicing.
Split v-groove B
Applicable fiber
Glass clamp cladding dia. 60 to 1200 µm
Coating clamp coating dia. 60 to 1500 µm
EV-LS01
FH-100-***-EV
Multi-core fiber
Clamp
500 µm
Light is launched into cladding through fiber coating. The
lens captures the fiber end-face image directed by the
mirror unit.
End view fiber image example
Non-circular fiber
The FSM-100M+ and FSM-100P+ have the revolutionary design clamp system.
No need to change V-groove or clamp part
Programmable for any fiber or coating size
Reliably captures fiber for good alignment
c
Mirror unit
PANDA fiber
a
FH-100-***-EV
Mirror unit
The cleaved ends of the optical fiber are observed in the axial direction by a means of a
mirror that directs the fiber-end image into the camera system.
This allows precise alignment of uniquely structured fibers, such as PM fiber, multicore non-circular fibers.
Mirror unit between the fiber
ends observes fiber in the axial
direction.
Patented “Split V-groove” clamping system
Holder Base
Conventional arc calibration
125 µm
Telecom fibers
Real time auto arc calibration
125 µm
Telecom fibers
Dual splice loss estimation
Combining the best features of both cold and warm splice imaging, FSM-100M+ and FSM-100P+ offer unprecedented accuracy for splice loss estimation
Enhanced sweep arc
Increased travel range for sweep arc provides improved MFD matching capability for reshaping non-circular fibers in preparation for splicing.
a
“Plasma Zone” fiber positioning
b
c
d
e
Electrode Gap
1 mm
1 mm
Internet firmware update & interface
3 mm
Electrode gap 1 mm
3 mm
Electrode
Electrode gap 3 mm
Sweep length Max.18mm
Splice Point
An industry first! Customers can now upgrade firmware as new capabilities become
available from Fujikura. Upgrading is as simple as connecting a USB cable to your splicer.
Production environment friendly design
Electrode
Electrode
A low profile design that eliminates fiber catch points, the dimensions of both splicers
are consistent with the most popular production splicing work-benches in use today.
0 µm
300 µm
Fiber profile learning function
The splicer learns the fiber profile with the best focusing position in order to observe the
core position accurately. After learning, the focusing time during a splice will be short.
Optimum Plasma Zone
60 µm
125 µm
Item
FSM-100M
alignment system
Electrode
V Height Shift
100 µm
Comparison table
500 µm
offset
FSM-100M+
-
Sweep arc stroke
FSM-100P
FSM-100P+
-
5 mm
18 mm
5 mm
18 mm
End view fiber
observation system
Electrode swing
system
LDF splicing
60 to 500 µm 60 to 1200 µm 60 to 500 µm 60 to 1200 µm
capability
Holder base position
adjustment system
Dual PM alignment (FSM-100P+ Only)
12
To properly align and splice the ever increasing and technically challenging variety of PM fibers, Fujikura
developed IPA which is a new alignment technology. The FSM-100P+ includes both traditional PAS
alignment as well as the new IPA technology, and it provides users with the most comprehensive
capabilities on the market for splicing PM fiber. IPA also enables accurate PER estimation for all PM fiber
types.
10
Frequency
The FSM-100M+ and FSM-100P+ have two
electrode positioning techniques in order to
provide unprecedented versatility for each
specialty fiber.
N : 30
Ave.: 44 dB
8
6
4
2
0
50
1 mm
1 mm
3 mm
PANDA
Ellipic-core
BOWTIE
48
46
44
42
40
38
36
Polarization Crosstalk dB
34
32
30