LCD Switches Programmable LCD Switches LSN Series Enhanced LED Illumination: » Broad and even light diffusion » Consistent backlighting » Low energy consumption Programmable LC Display Variety of LED Backlighting Rubber Dome Epoxy Sealed Straight PC Terminals LSNHGPSRG LSNHBWPFRGB with Yellow LCD Mode with RGB LED Option and Black & White LCD Mode RGB backlighting provides infinite color availability. Programmable to display graphics, alphanumeric characters and animated sequences. Integrated liquid crystal display provides wide viewing angle with high contrast and clarity. Wide viewing area 15.0mm x 10.8mm (horizontal x vertical) at 36 x 24 pixels. Dome gives crisp tactile feedback to positively indicate circuit transfer. High reliability and long life of one million actuations minimum. Epoxy sealed terminals prevent entry of solder flux and other contaminants. Optional accessories available to enhance panel design and simplify production process. STANDARD LED BACKLIGHTING Part Number Switch Description LCD Mode LSNLGPSRG SPST Momentary ON Gold Contacts Straight PC Terminals Yellow STN Positive LED Color * Red/Green * Simultaneous illumination of both colors achieves third color. LCD Switches SUPER BRIGHT LED BACKLIGHTING Part Number LCD Mode LED Color * LSNHGPSRG Yellow STN Positive Red/Green LSNHGPSG Yellow STN Positive Yellow LSNHGPSYG Yellow STN Positive Yellow/Green SPST Momentary ON Gold Contacts Straight PC Terminals * Blue STN Negative Yellow LSNHBNSGB Blue STN Negative Yellow/Blue LSNHBNSW Blue STN Negative White LSNHBWPFW Black & White FSTN Positive White LSNHBNSG All specifications are restricted to QA test criteria. DRW: D.L. JIN, CHK: D.F. LEE, APP: H.Z. QIU Switch Description * * Simultaneous illumination of both colors achieves third color. RGB LED BACKLIGHTING Part Number Switch Description LCD Mode LSNHBWPFRGB SPST Momentary ON Gold Contacts Straight PC Terminals Black & White FSTN Positive LED Color * Red/Green/Blue * Simultaneous RGB illumination achieves infinite colors. K01 [email protected] www.greatecs.com LCD Switches Programmable LCD Switches LSN Series GENERAL SPECIFICATIONS OF SWITCH Circuit SPST normally open Electrical Capacity (Resistive Load) 100mA@12VDC Contact Resistance 200 milliohms max. @ 20 mV 10mA Insulation Resistance 100 megaohms min. @ 100VDC Dielectric Strength 125VAC for 1 minute min. Mechanical Endurance 1,000,000 operations min. Electrical Endurance 1,000,000 operations min. Operating Force 2.2 ± 0.5 Newtons Total Travel 1.8mm Operating Temperature Range 0°C ~ +40°; contact factory for wide temperature range options GENERAL SPECIFICATIONS OF DISPLAY Display Operation Mode STN positive, STN negative, FSTN positive Display Condition Transflective with built-in LED backlight Viewing Angle Adjustable Driving Method 1/24 duty. 1/5 bias (built-in driving circuit) Viewing Area 15.0mm x 10.8mm (horizontal x vertical) Pixel Format 36 x 24 dots (horizontal x vertical) Pixel Size 0.36mm x 0.36mm (horizontal x vertical) TYPICAL SWITCH DIMENSIONS WITH SINGLE OR BICOLOR LEDS 15.0 17.78 See Standoff Detail 14.01 Part No. 13 12 12.5 13.5 9.33 20.59 12.5 7.62 10.8 13x 0.8 ~ 1.0 Dia 17.78 13 11 9 2 8 6 4 7 5 3 4 17.78 12 10 7.62 1 17.78 3 0.6 Typ 16.0 10.5 23.13 2.5 3.2 12.5 2.8 1.25 Typ 12.7 1.25 Typ LCD Switches See Pixel Detail 2x 0.9 Dia Landless 2.5 2.5 12.7 Terminal numbers are not on the switch Footprint TYPICAL SWITCH DIMENSIONS WITH RGB LED See Pixel Detail 15.0 17.78 See Standoff Detail 14.01 Part No. 14 13 12 10 1 13.5 9.33 10.8 8 13.75 6 4 2 4 20.59 13.75 7.62 17.78 14x 0.8 ~ 1.0 Dia 17.78 14 13 2 11 9 7.62 7 1 5 17.78 3 3 1.25 Typ 1.25 Typ 2x 0.9 Dia Landless 0.6 Typ 16.0 10.5 23.13 PIXEL DETAIL 2.5 3.2 12.5 2.8 12.7 2.5 2.5 Terminal numbers are not on the switch Footprint STANDOFF DETAIL 0.6 0.36 Sq 0.03 Typ 12.7 0.3 0.75 Dia 1.8 Dia [email protected] www.greatecs.com K02 LCD Switches Programmable LCD Switches LSN Series OPTIONAL ACCESSORIES: ZB1705-06KC SOCKET FOR SINGLE & BICOLOR LED MODELS Materials: Base - Glass Fiber Reinforced PBT Terminals - Brass/Beryllium Copper 13 11 9 12.5 7.62 20.5 7 12.5 0.51 DiaTyp 5 3 12 10 2 8 6 4 7.62 1 13x 0.8~ 1.0 Dia 1.25Typ 1.25 Typ 3.9 6.7 23.0 12.7 2.5 2.5 12.7 OPTIONAL ACCESSORIES: ZB2707 PANEL MOUNT HOUSING Materials: Polyamide Panel Thickness Range: 1.5 ~ 4.0 mm 23.7 31.5 27.5 29.0 12.6 23.2 2.0 27.6 17.7 23.7 OPTIONAL ACCESSORIES: ZB0202 COUPLER Material: PBT 1.0 1.0 16.0 4.2 0.97Typ 16.0 LCD Switches 4.2 Top Side Bottom DEMONSTRATION KIT Demonstration Kits 1 und 2 are shipped with a LCD Switch or LC Display, USB cable for PC connection, User Guide and CD with software. Optional Battery Box is available. Switch or Display Demonstration Kit The demonstration kit is used for displaying bitmaps, up to 64, that have been created on your PC via the Easy Editor software and USB cable (supplied). This kit contains a LCD Switch or LC Display with red/green bicolor LED. LSN-DEM KIT-A DEVELOPMENT KIT All development kits have been preprogrammed and designed to work with software. Two Switch Development Kit This development kit consists of 2 LCD Switches with red/green bicolor LED. The kit is designed to show how 2 switches interact together to accomplish numerous tasks. LSN-DEV KIT-B K03 [email protected] www.greatecs.com