Contactless Tilt Switch Series DS Distinctive Characteristics Photo interrupter, rather than contacts, ensures high reliability. Sealed construction for protection from environmental elements, including hydrogen sulfide, sulfur dioxide, and nitrogen hydroxide. Terminals are made of ammonia-resistent materials. Totally sealed body allows process compatibility for time- and money-saving automatic soldering and cleaning. Space-saving compact dimensions allow high density mounting. Internal steel ball movement allows functionality of 360° circumference rotation. The DS series switch is well-suited to meet product safety concerns due to normally closed (on) status. Crimped terminals ensure secure mounting and prevent dislodging during wave soldering. The switch is triggered when tilted beyond 30° in any direction. Actual Size NKK Switches • email: [email protected] • Phone (480) 991- 0942 • Fax (480) 998-1435 • www.nkkswitches.com 6-05 Contactless Tilt Switch Series DS SWITCH PART NUMBERS & DESCRIPTION ON-OFF Status ON-OFF Status Straight PC Terminals Right Angle PC Terminals DSBA1P DSBA1H SPECIFICATIONS Absolute Maximum Ratings Temperature at 25°C Input Output Symbol Rating Unit Forward Current IF 50 mA Reverse Voltage VR 5 Power Dissipation PD 75 mW Collector-Emitter Voltage VCEO 30 V Emitter-Collector Voltage VECO 3 V Collector Current IC 20 mA Collector Power Dissipation PC 50 mW Total Power Dissipation Ptot 100 mW V Mechanical Specifications Mechanical Life: Electrical Life: 150,000 operations minimum 150,000 operations minimum using applicable circuit Materials & Finishes Housing: Glass fiber reinforced polyamide (UL94V-0 flammability rating) Base: Glass fiber reinforced polyamide (UL94V-0 flammability rating) Terminals: Phosphor bronze with tin plating Environmental Specifications Operating Temperature Range: –25°C ~ +80°C (–13°F ~ +176°F) Storage Temperature Range: –30°C ~ +85°C (–22°F ~ +185°F) Humidity: 85% humidity for 500 hours @ +85°C (+185°F) Vibration: 10Hz with peak-to-peak amplitude of 10mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 500,000 cycles Shock: 100G (981m/s2 ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Notes: 1. Prevent exposure to magnetic fields. 2. Do not install switch near vibration source. NKK Switches • email: [email protected] • Phone (480) 991- 0942 • Fax (480) 998-1435 • www.nkkswitches.com 6-05 Series DS Contactless Tilt Switch SPECIFICATIONS (Continued) Operating Characteristics Circuit Characteristics (ON-OFF) Operating Angle Return Angle ±30° to ±60° Minimum 10° Output VOL VOH Output VOH VOL Output Characteristics VOL with Photo transistor ON: 1.0V maximum (horizontal) Output Characteristics VOH with Photo transistor OFF: 4.0V minimum (inclined at an angle of –60° minimum) Output Characteristics Reference Point O u tp u t Characteristics L – Moving Point pu t C h a r a c t e ri st +D eg ree t Characteristics L Return Angle An g Moving Point Moving Point ut ics O O ut O u tp u H Moving Point An le Return Angle ee gr De gle Straight PC H A Reference Point +D eg re eA ng le – ee gr De le ng pu t C h a r a c t e ri st ics Right Angle PC Circuit Design Considerations VCC VCC = 5V R1 ANODE Vo R2 = 100kΩ I F = 19mA (VCC = 5V, R1 = 200Ω) VF of the LED VCC R2 IF COLLECTOR Maximum = 1.3V CATHODE EMITTER PCB Processing Soldering: Automated Cleaning: Wave Soldering: 10 seconds maximum @ 260°C maximum Manual Soldering: 3 seconds maximum @ 350°C maximum Use alcohol based solution at 50°C maximum. Do not submerge over 2 inches (5cm) for 1 minute maximum. Do not use organic solvents. NKK Switches • email: [email protected] • Phone (480) 991- 0942 • Fax (480) 998-1435 • www.nkkswitches.com 6-05 Series DS Contactless Tilt Switch MOUNTING OPTIONS PCB PCB PCB mounting option for Straight PC PCB mounting option for Right Angle PC Install switch at an angle less than ±3° TYPICAL SWITCH DIMENSIONS Straight PC (0.4) Typ .016 (3.5) .138 (9.0) Dia .354 (10.0) .394 3 2 4 1 2 Cathode 3 Collector (11.9) .469 (11.9) .469 1 Anode (0.4) .016 (9.5) .374 (1.3) Dia Typ .051 (5.1) .201 (5.1) .201 4 Emitter (0.9) .035 (3.1) .122 (8.8) .346 (3.1) .122 Terminal numbers are on bottom of switch. DSBA1P Right Angle PC (8.8) .346 (7.7) .303 (9.0) Dia .354 (0.4) .016 2 1 3 4 2 Cathode (9.5) .374 1 Anode (5.1) .201 4 Emitter 3 Collector (10.0) .394 (11.9) .469 DSBA1H (3.5) .138 (0.4) .016 (3.1) .122 (1.5) .059 (5.1) .201 (3.1) .122 (11.9) .469 (1.3) DiaTyp .051 (0.9) Typ .035 (11.9) .469 Terminal numbers are on bottom of switch. NKK Switches • email: [email protected] • Phone (480) 991- 0942 • Fax (480) 998-1435 • www.nkkswitches.com 6-05