>> Small size & compact space >> Increased strength between housing and base >> High temperature and fire proof >> Suitable to IC trigger signal SENSOR SWITCHES >> Complete replacement of mercury switches >> Meet environmental protection >> RoHS compliant NV1 Series NV2 Series Industrial Control Car Alarm Vibration Sensor Switches NV3 Series Building Building Alarm Alarm NV4 Series Power Saving TPMS Bicycle Lighting NR1 Series Tablet PC Roll Ball Sensor Switches NR2 Series NR3 Series Earthquake Detecting Power Saving NP1 Series Optical Roll Ball Sensor Switches Car Monitor NP2 Series Notebook [email protected] Car Boots Lighting www.greatecs.com Sensor Switches NR1 Series Roll Ball Switch Applications: 1. Horizontral Tilt Detecting: Digital Picture Frames 2. Vertical Rotation Detecting: Digital Camera 3.Shock Detecting: Tracing Equipment Dimensions/ Operation/ P.C.B. Layout(Unit: mm,Tolerance:±0.25mm) Installation Position Triggered Angle Rang Θ>10°, Θ< -10° P.C.B Layout (SMT) Triggered Angle Rang Θ>10°, Θ< -10° P.C.B Layout (SMT) NR1 - 0H0B Installation Position NR1 - 0I0B P.C.B Layout (SMT) Installation Position NR1 - 0J0B All specifications are restricted to QA test criteria. DRW: D. L. JIN, CHK: D.F. LEE, APP: H.Z. QIU, DC: 2011-11-14 GENERAL SPECIFICATIONS Features: Eletrical Characteristics: 1.Mininature size, compact space, and innovation wing-types terminal designed, making install space minimun above the pringt circuit board. 2.Special structures which increase strenth between housing and base, offering perfect appearance. 3. Terminals and balls gold plated to enhance the life 4. Suitable to IC trigger singal. 5. Complete replacement of mercury switch and meet with environmental protection. 1. Contact Rating: 25mA, 24VDC 2. Contact Resistance: 10 max 3. Insulation Resistance:1000M min. At 100VDC 4. Differential Angle: Refer to the drawing 5. Dielectric Strength: 500 VDC min. for 1 minute 6.Capacitance: 5pF max Bill Of Material: 1. Housing: Copper Alloy, Tin Plated over NIckel or Gold Plated(3µ”) over Nickel 2. Isolation Base: Class-Fiber Polyamide,UL 94-0 3. Terminal: Copper Alloy, Gold Plated(3µ”) over Nickel 4. Ball: Copper Alloy, Gold Plated(10µ”) over NIckel [email protected] Mechanical Characteristics: 1. Temperature Range: Operating: -25°C to +85°C ; Storage : -40°C to +85°C 2. Pull Force of Terminal: 500 gf for 1 minute 3. Operation Life: 100,000 Cycles 4. Conductive Rate (Switch-on Rate): min. over 90% 5. Humidity: 95% RH,40°C for 96 hrs. 6.Solder ability : After flux 260±5°C for 5±0.5 seconds 95% coverage 7.Reflow Soldering Heat for SMT type: Reflow zone 260±5° for 20 seconds max. www.greatecs.com 1 Sensor Switches NR1 Series Roll Ball Switch « NOTE 1. Suggestion for Application: Application in occasions that require vibration functions, adding design of “ON DELAY” is recommended. For great vibration, Optical type Products are recommended. 2. Suggestion Contact Rating: 5 mA. 3. Conductive Rate: To test the conductivity (Switch-on Rate) of one switch individually for100 times, if the switch conductive 95 times, we call the “conductive rate” is 95%. 4. For the continued product improvement as one of the company policy, specifications may change or update without notice. The latest information can be obtained through our sales offices. Normally, all products are supplied under our standard conditions. « PRECAUTIONS FOR USE 1. The product is used mainly in electronic devices such as automotive devices, visual devices, home electrical appliances, information devices and communication settings. If the products is intended to be used for other endurance equipments requiring higher safety and reliability such as life support system, space and aviations devices, disaster and safety system, it’s necessary to make verification of conformity or contact us for the details before using. 2. Don’t try to clean the switch with a solvent or similar substance after the soldering Prozess. 3. The switch might be damaged if using the water-soluble flux. 4. The switch might be apart if the so ldering condition over specification. 5. Don’t use the switch in the environment with high humidity or other bedewing possibility, as it may cause leaking among the terminals. 6. It might catch fire if the rating exceeds the specifications. Never use the switch beyond the Rating. PACKAGE (Minimum Order Quantity: One Bag / One Reel) Part Number 2. 3. Package Quantity Total NR1-0H0B PE Bag 2,000 pcs 2,000 pcs 12.7 x 17.8 cm NR1-0I0B Inner Box 10 Bags 20,000 pcs 36 x 20 x 9 cm NR1-0J0B Carton 3 Boxes 60,000 pcs 36 x 28 x 23 cm Reel 2,500 pcs 2,500 pcs 30 x 30 cm Inner Box 2 Reels 5,000 pcs 36 x 34 x 7 cm Carton 4 Boxes 20,000 pcs 37 x 37 x 28 cm NR1-0I0BT [email protected] Size www.greatecs.com 2 Sensor Switches NR2 Series Roll Ball Switch Applications: 1. 45° Tilt Detecting within a 360° radius: Home Appliance Tilt Off function Dimensions/ Operation/ P.C.B. Layout(Unit:mm,Tolerance: ±0.25mm) Installation Position P.C.B Layout NR2 - 0A00 Installation Position P.C.B Layout NR2 - 0B00 All specifications are restricted to QA test criteria. DRW: D. L. JIN, CHK: D.F. LEE, APP: H.Z. QIU, DC: 2011-11-14 GENERAL SPECIFICATIONS Features: Eletrical Characteristics: 1. Small size & compact space. 2. Tip-over switch. 3. Balls are gold plated to enhance the life. 4. All plastic material subject to industrial purpose meets high temperature and fireproof function 5. Suitable to IC trigger singnal. 6. Complete replacement of mercury switch and meet with environmental protection 1. Contact Rating: 25mA, 24VDC 2. Contact Resistance: 100 max 3. Insulation Resistance:1000M min. At 100VDC 4. Differential Angle: Refer to the drawing 5. Dielectric Strength: 500 VDC min. for 1 minute 6.Capacitance: 5pF max 7. Switching type: Normal Open(NO) Mechanical Characteristics: Bill Of Material: 1. Housing: ZINC Alloy, Tin Plated over NIckel 2. Cover: Class-Fiber Polyamide 3. Terminal: Copper Alloy, Gold Plated(3µ”) over Nickel 4. Ball: Copper Alloy, Gold Plated(3µ”) over NIckel 5. Steel Ball: Stainless Steel [email protected] 1. Temperature Range: Operating: -25°C to +85°C ; Storage : -40°C to +85°C 2. Pull Force of Terminal: 500 gf for 1 minute 3. Operation Life: 100,000 Cycles 4. Conductive Rate (Switch-on Rate): min. over 90% 5. Humidity: 95% RH,40°C for 96 hrs. 6. Solder ability : After flux 245±5°C for 5±0.5 seconds 95% coverage www.greatecs.com 1 Sensor Switches NR2 Series Roll Ball Switch « NOTE 1. Suggestion for ApplicationΚApplication in occasions that require vibration functions, adding design of “ON DELAY” is recommended. For great vibration, Optical type products are recommended. 2. Suggestion Contact Rating: 5 mA. 3. Conductive Rate: To test the conductivity (Switch-on Rate) of one switch individually for 100 times, if the switch conductive 95 times, we call the “conductive rate” is 95%. 4. Switches will provide pulse at tilt angle but the signal will not be a continued state after tilt angle. 5. For the continued product improvement as one of the company policy, specifications may change or update without notice. The latest information can be obtained through our sales offices. Normally, all products are supplied under our standard conditions. « PRECAUTIONS FOR USE 1. The product is used mainly in electronic devices such as automotive devices, visual devices, home electrical appliances, information devices and communication settings. If the products is intended to be used for other endurance equipments requiring higher safety and reliability such as life support system, space and aviations devices, disaster and safety system, it’s necessary to make verification of conformity or contact us for the details before using. 2. Don’t try to clean the switch with a solvent or similar substance after the soldering process. 3. The switch might be damaged if using the water-soluble flux. 4. Don’t use the switch in the environment with high humidity or other bedewing possibility, as it may cause leaking among the terminals. 5. It might catch fire if the rating exceeds the specifications. Never use the switch beyond the rating. PACKAGE (Minimum Order Quantity: One Bag) Part Number 1. NR2 - 0A00 NR2 - 0B00 [email protected] Package Quantity Total Size PE Bag 500 pcs 500 pcs 12.7 x 17.8 cm Inner Box 10 Bags 5,000 pcs 36 x 20 x 9 cm Carton 3 Boxes 15,000 pcs 36 x 28 x 23 cm www.greatecs.com 2 Sensor Switches NR3 Series Roll Ball Switch Applications: 1. 45° Tilt Detecting within a 360° radius: Xbox 360, Exsiccators, Home Appliance Tilt Off function. Dimensions/ Operation/ P.C.B. Layout (Unit:mm,Tolerance: ±0.25mm) NR3 - 0CA0 NR3 - 0DA0 P. C. B Layout P. C. B Layout Drawing 1 All specifications are restricted to QA test criteria. DRW: D. L. JIN, CHK: D.F. LEE, APP: H.Z. QIU, DC: 2011-11-14 Drawing 1 Drawing 2 Drawing 2 NR3 - 0E00 P. C. B Layout NR3 - 0F00 P. C. B Layout [email protected] www.greatecs.com 1 Sensor Switches NR3 Series Roll Ball Switch GENERAL SPECIFICATIONS Features: Mechanical Characteristics: 1. Small size & compact space. 2. Housing made of high insulation plastic material, free from electric conduction and rust problem. 3. Terminal and balls are gold plated to enhance the life. 4. All plastic material subject to industrial purpose high temperature and fireproof function 5. Suitable to IC trigger singnal. 6. Complete replacement of mercury switch and meet with environmental protection 1. Temperature Range: Operating: -25°C to +85°C ; Storage : -40°C to +85°C 2. Pull Force of Terminal: 500 gf for 1 minute 3. Operation Life: 100,000 Cycles 4. Conductive Rate (Switch-on Rate): min. over 90% 5. Humidity: 95% RH,40°C for 96 hrs. 6. Solder ability : After flux 260±5°C for 5±0.5 seconds 95% coverage 7. Reflow Soldering Heat for SMT type(for NR30E00): Reflow zone 260±5°C for 20 seconds max. Eletrical Characteristics: 1. Contact Rating: 25mA, 24VDC 2. Contact Resistance: Initial:5 After Life Test:10 max 3. Insulation Resistance:1000M min. At 100VDC 4. Differential Angle: Refer to the drawing 5. Dielectric Strength: 500 VDC min. for 1 minute 6.Capacitance: 5pF max 7. Switching type: Normal Close (NC) Bill Of Material: 1. Housing: Glass-Fiber Polyamide(NR3-0C/DA0) Glass-Fiber Liquid crystal polymer(NR3-0E/F00) 2. Terminal: Copper Alloy, Gold Plated(3µ”) over Nickel 3. Ball: Copper Alloy, Gold Plated(3µ”) over NIckel « NOTE 1. Suggestion Contact Rating: 5 mA. 2. For the continued product improvement as one of the company policy, specifications may change or update without notice. The latest information can be obtained through our sales offices. Normally, all products are supplied under our standard conditions. « PRECAUTIONS FOR USE 1. The product is used mainly in electronic devices such as automotive devices, visual devices, home electrical appliances, information devices and communication settings. If the products is intended to be used for other endurance equipments requiring higher safety and reliability such as life support system, space and aviations devices, disaster and safety system, it’s necessary to make verification of conformity or contact us for the details before using. 2. Don’t try to clean the switch with a solvent or similar substance after the soldering Prozess. 3. The switch might be damaged if using the water-soluble flux. 4. The switch might be apart if the so ldering condition over specification. 5. Don’t use the switch in the environment with high humidity or other bedewing possibility, as it may cause leaking among the terminals. 6. It might catch fire if the rating exceeds the specifications. Never use the switch beyond the Rating. PACKAGE (Minimum Order Quantity: One Bag) Part Number 1. 2. NR3-0CA0 Package PE Bag Total Size 500 pcs 500 pcs Inner Box 10 Bags 5,000 pcs 36 x 20 x 9 cm Carton 3 Boxes 15,000 pcs 36 x 28 x 23 cm PE Bag 500 pcs 12.7 x 17.8 cm NR3-0DA0 NR3-0E00 Inner Box 8 Bags 4,000 pcs 36 x 20 x 9 cm NR3-0F00 Carton 3 Boxes 12,000 pcs 36 x 28 x 23 cm Reel 3. Quantity NR3-0E00 [email protected] Inner Box Carton 500 pcs 750pcs 750pcs 2 Reels 4 Boxes 1,500 pcs 6,000 pcs 12.7 x 17.8 cm 30 x 30 cm 36 x 34 x 7 cm 37 x 37 x 28 cm www.greatecs.com 2