KBJ4005G thru KBJ404G Single Phase Glass Passivated Silicon Bridge Rectifier VRRM = 50 V - 400 V IO = 4 A Features • Ideal for printed circuit board • Reliable low cost construction • Plastic material has Underwriters Laboratory Flammability Classification 94V-0 • Surge overload rating to 120 Amperes peak • Types from 50 V to 400 V VRRM KBJ Package • Not ESD Sensitive Mechanical Data Case: Molded plastic Weight: 0.15 ounce, 4.0 grams Mounting torque: 5 inch-lb max Maximum ratings at Tj = 25 °C, unless otherwise specified KBJ4005G KBJ401G KBJ402G KBJ404G Unit VRRM 50 100 200 400 V RMS reverse voltage VRMS 35 70 140 280 V DC blocking voltage Operating temperature Storage temperature VDC Tj Tstg 50 -55 to 150 -55 to 150 100 -55 to 150 -55 to 150 200 -55 to 150 -55 to 150 400 -55 to 150 -55 to 150 V °C °C KBJ401G KBJ402G KBJ404G Unit Parameter Symbol Repetitive peak reverse voltage Conditions Electrical characteristics at Tj = 25 °C, unless otherwise specified Single phase, half sine wave, 60 Hz, resistive or inductive load For capacitive load derate current by 20% Parameter Symbol Conditions KBJ4005G Maximum average forward rectified current IO Tc = 108 °C Ta = 25 °C 4 4 4 4 2.3 2.3 2.3 2.3 Peak forward surge current IFSM 8.3 ms single sine-wave 120 120 120 120 A Maximum instantaneous forward voltage per leg VF IF = 4 A 1.1 1.1 1.1 1.1 V Maximum reverse current at rated DC blocking voltage per leg IR Ta = 25 °C 5 5 5 5 Ta = 125 °C 500 500 500 500 www.genesicsemi.com/silicon-products/bridge-rectifiers/ 1 A μA KBJ4005G thru KBJ404G www.genesicsemi.com/silicon-products/bridge-rectifiers/ 2 KBJ4005G thru KBJ404G Package dimensions and terminal configuration Product is marked with part number and terminal configuration. Di Dimensions i iin iinches h and d ((millimeters) illi t ) www.genesicsemi.com/silicon-products/bridge-rectifiers/ 3