KBL406G thru KBL410G Single Phase Glass Passivated Silicon Bridge Rectifier VRRM = 600 V - 1000 V IO = 4 A Features • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • High surge current capability • Silver plated copper leads • Types from 50 V to 400 V VRRM KBL Package • Not ESD Sensitive Mechanical Data Case: Molded plastic Terminals: Plated terminals, solderable per MIL-STD202F, Method 208 Polarity: Marked on body Weight: 0.167 ounce, 5 grams Mounting position: Any Maximum ratings at Ta = 25 °C (ambient temperature), unless otherwise specified KBL406G KBL408G KBL410G Unit VRRM 600 800 1000 V RMS reverse voltage VRMS 420 560 700 V DC blocking voltage Operating temperature Storage temperature VDC Tj Tstg 600 -50 to 150 -50 to 150 800 -50 to 150 -50 to 150 1000 -50 to 150 -50 to 150 V °C °C Parameter Symbol Repetitive peak reverse voltage Conditions Electrical characteristics at Ta = 25 °C, unless otherwise specified Single phase, half sine wave, 60 Hz, resistive or inductive load For capacitive load derate current by 20% Parameter Symbol Conditions KBL406G KBL408G KBL410G Unit Maximum average forward rectified current IO Ta = 50 °C 4 4 4 A Peak forward surge current IFSM single sine-wave 120 120 120 A Maximum instantaneous forward voltage per leg VF IF = 4 A 1.1 1.1 1.1 V Maximum reverse current at rated DC blocking voltage per leg IR Ta = 25 °C 5 5 5 Ta = 125 °C 100 100 100 www.genesicsemi.com/silicon-products/bridge-rectifiers/ 1 μA KBL406G thru KBL410G www.genesicsemi.com/silicon-products/bridge-rectifiers/ 2 KBL406G thru KBL410G Package dimensions and terminal configuration Product is marked with part number and terminal configuration. Dimensions in inches and (millimeters) www.genesicsemi.com/silicon-products/bridge-rectifiers/ 3