KBP206G thru KBP210G Single Phase Glass Passivated Silicon Bridge Rectifier VRRM = 600 V - 1000 V IO = 2 A Features • Ideal for printed circuit board • Plastic material has Underwriters Laboratory Flammability Classification 94V-0 • Built-in printed circuit board stand-offs • High temperature soldering guaranteed 265°C/ 10 seconds KBP Package • High case dielectric strength • Types from 600 V to 1000 V VRRM • Not ESD Sensitive Mechanical Data Case: Reliable low cost construction Terminals: Plated leads, solderable per MIL-STD-202, Method 208 Mounting position: Any Weight: 0.065 oz, 2.2 grams Maximum ratings at Ta = 25 °C (ambient temperature), unless otherwise specified KBP206G KBP208G KBP210G Unit VRRM 600 800 1000 V RMS reverse voltage VRMS 420 560 700 V DC blocking voltage Operating temperature Storage temperature VDC Tj Tstg 600 -55 to 150 -55 to 150 800 -55 to 150 -55 to 150 1000 -55 to 150 -55 to 150 V °C °C Parameter Symbol Repetitive peak reverse voltage Conditions Electrical characteristics at Ta = 25 °C, unless otherwise specified Single phase, half sine wave, 60 Hz, resistive or inductive load For capacitive load derate current by 20% Parameter Symbol Conditions KBP206G KBP208G KBP210G Unit Maximum average forward rectified current IO Ta = 50 °C 2 2 2 A Peak forward surge current IFSM single sine-wave 60 60 60 A Maximum instantaneous forward voltage per leg VF IF = 2 A 1.1 1.1 1.1 V Maximum reverse current at rated DC blocking voltage per leg IR Ta = 25 °C 10 10 10 Ta = 100 °C 500 500 500 25 25 25 μA Thermal characteristics Thermal resistance RΘJL www.genesicsemi.com/silicon-products/bridge-rectifiers/ 1 °C/W KBP206G thru KBP210G www.genesicsemi.com/silicon-products/bridge-rectifiers/ 2 KBP206G thru KBP210G Package dimensions and terminal configuration Product is marked with part number and terminal configuration. Dimensions in inches and (millimeters) www.genesicsemi.com/silicon-products/bridge-rectifiers/ 3