KBL401G thru KBL404G Single Phase Glass Passivated Silicon Bridge Rectifier VRRM = 50 V - 400 V IO = 4 A Features • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • High surge current capability • Silver plated copper leads • Types from 50 V to 400 V VRRM KBL Package • Not ESD Sensitive Mechanical Data Case: Molded plastic Terminals: Plated terminals, solderable per MIL-STD202F, Method 208 Polarity: Marked on body Weight: 0.167 ounce, 5 grams Mounting position: Any Maximum ratings at Tj = 25 °C, unless otherwise specified KBL401G KBL402G KBL403G KBL404G Unit VRRM 50 100 200 400 V RMS reverse voltage VRMS 35 70 140 280 V DC blocking voltage Operating temperature Storage temperature VDC Tj Tstg 50 -50 to 150 -50 to 150 100 -50 to 150 -50 to 150 200 -50 to 150 -50 to 150 400 -50 to 150 -50 to 150 V °C °C Parameter Symbol Repetitive peak reverse voltage Conditions Electrical characteristics at Tj = 25 °C, unless otherwise specified Single phase, half sine wave, 60 Hz, resistive or inductive load For capacitive load derate current by 20% Parameter Symbol Conditions KBL401G KBL402G KBL403G KBL404G Unit Maximum average forward rectified current IO Ta = 50 °C 4 4 4 4 A Peak forward surge current IFSM single sine-wave 120 120 120 120 A Maximum instantaneous forward voltage per leg VF IF = 4 A 1.1 1.1 1.1 1.1 V Maximum reverse current at rated DC blocking voltage per leg IR Ta = 25 °C 5 5 5 5 Ta = 125 °C 100 100 100 100 www.genesicsemi.com/silicon-products/bridge-rectifiers/ 1 μA KBL401G thru KBL404G www.genesicsemi.com/silicon-products/bridge-rectifiers/ 2 KBL401G thru KBL404G Package dimensions and terminal configuration Product is marked with part number and terminal configuration. Di Dimensions i iin iinches h and d ((millimeters) illi t ) www.genesicsemi.com/silicon-products/bridge-rectifiers/ 3