KBJ25005G thru KBJ2504G Single Phase Glass Passivated Silicon Bridge Rectifier VRRM = 50 V - 400 V IO = 25 A Features • Ideal for printed circuit board • Low forward voltage drop, high current capability • Plastic material has Underwriters Laboratory Flammability Classification 94V-0 • Reliable, low cost construction utilizing molded plastic technique • Types from 50 V to 400 V VRRM KBJ Package • Not ESD Sensitive Maximum ratings at Tj = 25 °C, unless otherwise specified KBJ25005G KBJ2501G KBJ2502G KBJ2504G Unit VRRM 50 100 200 400 V RMS reverse voltage VRMS 35 70 140 280 V DC blocking voltage Operating temperature Storage temperature VDC Tj Tstg 50 -55 to 125 -55 to 150 100 -55 to 125 -55 to 150 200 -55 to 125 -55 to 150 400 -55 to 125 -55 to 150 V °C °C KBJ2502G KBJ2504G Unit Parameter Symbol Repetitive peak reverse voltage Conditions Electrical characteristics at Tj = 25 °C, unless otherwise specified Single phase, half sine wave, 60 Hz, resistive or inductive load For capacitive load derate current by 20% Parameter Symbol Conditions KBJ25005G KBJ2501G 25 25 25 25 4.2 Maximum average forward rectified current IO Tc = 110 °C Ta = 25 °C 4.2 4.2 4.2 Peak forward surge current IFSM 8.3 ms single sine-wave 350 350 350 350 A Maximum instantaneous forward voltage per leg VF IF = 12.5 A 1.05 1.05 1.05 1.05 V Maximum reverse current at rated DC blocking voltage per leg IR Ta = 25 °C 10 10 10 10 Ta = 125 °C 500 500 500 500 www.genesicsemi.com/silicon-products/bridge-rectifiers/ 1 A μA KBJ25005G thru KBJ2504G www.genesicsemi.com/silicon-products/bridge-rectifiers/ 2 KBJ25005G thru KBJ2504G Package dimensions and terminal configuration Product is marked with part number and terminal configuration. Dimensions in inches and (millimeters) www.genesicsemi.com/silicon-products/bridge-rectifiers/ 3