www.hamlin.com 55075 Hall Effect Geartooth Speed Sensor Features Benefits Applications ● Rotary position geartooth sensor ● Stainless steel M12 threaded barrel ● Electronic protection against severe and ● Long life; up to 20 billion operations ● High speed operation ● No chopper delay ● Unaffected by harsh environments ● Rotary orientation not critical ● On-chip 10 bit A/D converter ● Customer selection of cable length and ● ● ● ● automotive environments ● Self adjusting magnetic range ● 3 wire (voltage output) ● EMC Protection (consult Hamlin) ● Short circuit/reverse voltage protection Geartooth sensor Camshaft sensor Linear encoder Rotary encoder connector type DIMENSIONS (in) mm BLOCK DIAGRAM SPECIFICATIONS Hall Type Digital Switch 3 Wire (Voltage Output) Supply Voltage (Note1) Maximum Operation Overvoltage Protection Vdc Vdc Vdc - max. -25 to +25.2 4.75 to 25.2 27 Output High Voltage Vdc - min. VDD - 2 (sinking output with internal pull-up resistor) Output Low Voltage Vdc - max. 0.6 @20mA Output Current (continuously on) mA - max. 20 Current Consumption mA - min. mA - max. 1 10.5 Switching Speed KHz-max. Temperature Operating Storage 15 -40 to +85 -65 to +85 °C °C Note 1: As long as Tj (Junction Temperature) is not exceeded. APPLICATION EXAMPLE - Geartooth Sensor CUSTOMER OPTIONS - Cable Length and Terminations Table 1 Table 2 Cable Length Options: (Cable Type 24 AWG 7/32 PVC 105°C Double Insulated (.059") 1.5mm Typical Typical Output Select Option Cable Length (in) mm 01 (3.94) 100 02 (11.81) 300 03 (19.69) 500 04 (29.53) 750 05 (39.37) 1000 Termination Options: Select Option Description A Tinned leads C 6.35mm fastons D AMP MTE 2,54mm pitch E Jst xhp 2,5mm pitch ORDERING INFORMATION 55075 00 XX Series 55075 Hamlin USA Hamlin Europe Hamlin China Cable Length Table 1 Termination Table 2 Tel: +1 920 648 3000 • Fax: +1 920 648 3001 • Email: [email protected] Tel: +44 (0)1603 257700 • Fax: +44 (0)1603 257702 • Email: [email protected] Tel: +86 (0) 512 69365 800 • Fax: +86 (0) 512 69365 811 • Email: [email protected] DRGNo: 55075XXXXX REV : AG Date: 9/6/12 DCR:B9016 X