www.hamlin.com 55110 L.E.D. Flange Mount Hall Effect Sensor Features and Benefits Features Benefits • Magnetically operated position sensor • Digital or latching types available • Integral LED • Medium or high senstivities • 3 wire (voltage output) • Vibration 50g max. @ 50-2,000Hz • Shock 150g max. @ 11ms 1/2 Sine • EMC to DIN 40839 (Consult Hamlin) • Reverse/Over Voltage Protection • Built in temperature compensation • • • • • • Applications High switching speed up to 10kHz Long life; up to 20 billion operations Visual indication of operation Unaffected by harsh environments Operates in static or dynamic magnetic field Customer selection of cable length and connector type DIMENSIONS (in) mm • • • • • • Position and limit sensing RPM measurement Flow metering Commutation of brushless dc motors Angle sensing Magnetic encoders BLOCK DIAGRAMS Note Add capacitor Cn as shown, close for the sensor, for transient suppression if required CUSTOMER OPTIONS - Switching Specifications SPECIFICATIONS Digital Switch or Digital Latch Hall Type 3 Wire (Voltage output) Supply Voltage (Note 1) Absolute Ratings Vdc -15 to +28 Operate Vdc +3.8 to +24 Overvoltage Protection Vdc-max 32 Vdc-min Vdd-2 @ 0.1mA (sinking output with internal pull-up) Output Low Voltage Vdc-max 0.4 @ 20mA Output Current (continuously on) mA-max 20 Switching Speed kHz-max Output High Voltage Temperature 10 Operating O C -40 to +85 Storage O C -65 to +85 Note 1 - As long as Tj (Junction Temperature) max. is not exceeded CUSTOMER OPTIONS - Sensitivity, Cable Length and Termination Specification TABLE 1 HALL OPTIONS TABLE 2 ACTIVATE DISTANCES ARE APPROXIMATE USING NEFEB MAGNET (.827L X .276W X .185H) 21 5812334000 X 7 X N S d (Cable type 24 AWG 7/32 PVC 105oC Double Insulated) 4.7 HAMLIN P/N Select Hall Option Hall Type Sensitivity Gauss (Typ.) Activate - d (in) mm 3M 3 Wire Switch 130 (.492) 12.5 TABLE 3 Termination Options:- Cable Length:- SELECT LENGTH OPTION (in) SELECT OPTION DESCRIPTION A Tinned leads B Crimped terminals C 6.35mm fastons D AMP MTE 2.54mm pitch E JST XHP 2.5mm pitch mm 01 (3.94) 100 02 (11.81) 300 03 (19.69) 500 3H 3 Wire Switch 59 (.709) 18.0 04 (29.53) 750 3L 3 Wire Latch 86 (.394) 10.0 05 (39.37) 1000 ORDERING INFORMATION 55110 XX XX X Series 55110 Hamlin USA Hamlin UK Hamlin Germany Hamectrol France Tel: Tel: Tel: Tel: Hall option Table 1 Cable Length Table 2 Termination Table 3 +1 920 648 3000 • Fax: +1 920 648 3001 • Email: [email protected] +44 (0)1379 649700 • Fax: +44 (0)1379 649702 • Email: [email protected] +49 (0) 6142 923920 • Fax: +49 (0) 6142 923921 • Email: [email protected] +33 (0) 1 4687 0202 • Fax: +33 (0) 1 4686 6786 • Email: [email protected] Issue No: AC Date:05/02/09 DCR B6092 INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN.