PART NAME 1.623 41.2 .898 22.8 6.001 152.4 7.498 190.4 PART No. NEMA 4X PLASTIC BOX w/EXTERNAL MTG. BRKT. 5.354 136 2.815 71.5 2.362 60 2.666 67.7 TYP. 2.392 C 60.8 C 5.332 135.4 3.346 85 2.362 60 3.194 81.1 .177 4.5 TYP. .177 4.5 6.947 176.4 .181 4.6 TYP. .276 BOSS WITH 7 .098 HOLE X .197 DEEP 8X [2.49] [5.0] 2.441 62 BODY 15° TYP. .315 8 .335 TYP. 8.5 MOUNTING HOLES ACCEPT M4 OR #8 PAN HEAD SCREW (NOT SUPPLIED) .591 15 TYP. .236 6 MATERIAL & FINISH: (-MB SUFFIX PART NO.) POLYCARBONATE UL94-HB, UV STABILIZED, SERVICE TEMPERATURE RANGE: -40 C TO +120 C, LIGHT GRAY BODY & COVER. (-CMB SUFFIX PART NO.) SAME AS -MB EXCEPT CLEAR COVER. (-DGMB SUFFIX PART NO.) ABS UL94-HB, SERVICE TEMPERATURE RANGE: -40 C TO +80 C, DARK GRAY BODY & COVER. NOTES: 1.) FOUR (4) M4 STAINLESS STEEL SCREWS SUPPLIED FOR ASSEMBLY OF COVER TO BODY. 2.) BOXES DESIGNED TO MEET FOLLOWING STANDARDS: NEMA 1, 2, 4, 4X, 12, 13 AND IEC529-IP66 REQUIREMENTS. 3.) ALL HOLE DIAMETERS HAVE .005[.12] TOLERANCE. ALL OTHER DIMENSIONS HAVE .015[.38] TOLERANCE. 4.) ALL OUTSIDE DRAFT ANGLE: 1 ALL INSIDE DRAFT ANGLE: 1/2 5.) DIMENSIONS ARE INCH[MM] 3.150 80 B .472 12 .591 15 SECTION B-B 3.110 79 SECTION C-C SHOWN WITH COVER 2-10-14 .276 7 .315 TYP. 8 A 2.283 58 2.852 72.4 .197 TYP. 5 .118 3 6.387 162.2 REVISION DATE PN-1333-DGMB 3.246 82.4 .236 6 1.142 29 M4 THREADED BRASS INSERT FOR COVER MOUNTING 4X PN-1333-CMB SECTION A-A A 2.392 60.8 PN-1333-MB 6.299 160 5.827 148 .185 4.7 .118 3 .083 2.1 SILICONE SPONGE GASKET .236 6 .177 4.5 B 2.677 68 COVER .315 8 .118 3