PART NAME 4.449 113 .276 BOSS WITH 7 .098 HOLE X .197 DEEP 8X [2.49] [5.00] 5.909 150.1 PART No. NEMA 4X PLASTIC BOX w/EXTERNAL MTG. BRKT. 3.937 100 .354 9 TYP. .748 19 TYP. 1.297 32.9 C .354 BOSS WITH 9 .177 HOLE X .197 DEEP 4X [4.50] [5.00] 3.307 84 A C 1.929 49 2.403 61 2.795 71 TYP. 2.399 60.9 .431 10.9 A 3.858 98 4.807 122.1 4.449 4.799 113 121.9 M4 THREADED BRASS INSERT FOR COVER MOUNTING 4X PN-1337-MB PN-1337-CMB .197 TYP. 5 2.421 61.5 .236 6 PN-1337-DGMB 3.150 80 .177 4.5 TYP. SECTION A-A .335 8.5 MOUNTING HOLES ACCEPT M4 OR #8 PAN HEAD SCREW (NOT SUPPLIED) BODY 5.358 136.1 .181 4.6 15° TYP. .591 15 1.181 30 4.724 120 3.308 84 3.543 90 .276 7 4.173 106 B SECTION C-C SHOWN WITH COVER MATERIAL & FINISH: (-MB SUFFIX PART NO.) POLYCARBONATE UL94-HB, UV STABILIZED, SERVICE TEMPERATURE RANGE: -40 C TO +120 C, LIGHT GRAY BODY & COVER. (-CMB SUFFIX PART NO.) SAME AS -MB EXCEPT CLEAR COVER. (-DGMB SUFFIX PART NO.) ABS UL94-HB, SERVICE TEMPERATURE RANGE: -40 C TO +80 C, DARK GRAY BODY & COVER. NOTES: 1.) FOUR (4) M4 STAINLESS STEEL SCREWS SUPPLIED FOR ASSEMBLY OF COVER TO BODY. 2.) BOXES DESIGNED TO MEET FOLLOWING STANDARDS: NEMA 1, 2, 4, 4X, 12, 13 AND IEC529-IP66 REQUIREMENTS. 3.) ALL HOLE DIAMETERS HAVE .005[.12] TOLERANCE. ALL OTHER DIMENSIONS HAVE .015[.38] TOLERANCE. 4.) ALL OUTSIDE DRAFT ANGLE: 1 ALL INSIDE DRAFT ANGLE: 1/2 5.) DIMENSIONS ARE INCH[MM] 4.724 120 .728 18.5 .217 5.5 .177 4.5 .315 8 .177 4.5 4.173 106 .276 7 2-10-14 .276 7 .197 TYP. 5 .118 3 REVISION DATE .118 3 .079 2 B SILICONE SPONGE GASKET COVER SECTION B-B