PART NAME PART No. NEMA 4X DIE CAST ALUMINUM ENCLOSURE AN-2872 REVISION DATE AN-2872-B 3-19-14 9.131 231.9 8.580 217.9 .217 (4X) 5.5 6.929 176 .823 20.9 6.299 160 5.433 138 .825 21 C 4.800 121.9 4.252 108 3.543 3.150 80 90 TYP. TYP. .126 X .394 DEEP (12X) [10.0] 3.2 ACCEPTS M3.5 SELF-TAPPING SCREW (NOT SUPPLIED) .787 20 C 7.564 192.1 .079 2 BODY 1.693 43 TYP. .787 20 .177 4.5 .071 1.8 90° .315 8 .571 14.5 7.874 200 SILICONE GASKET (CLEAR) SECTION B-B 2.803 71.2 NOTES: 1- MATERIAL: ALUMINUM ALLOY ADC-12 2- FINISH: NATURAL (NO SUFFIX) BLACK (SUFFIX -B) 3- FOUR (4) M4 X 0.7mm SCREWS SUPPLIED FOR ASSEMBLY OF COVER TO BODY 4- ALL HOLE DIAMETERS HAVE .005[.12] TOLERANCE. ALL OTHER DIMENSIONS HAVE .015[.38] TOLERANCE. 5- ALL OUTSIDE DRAFT ANGLE: 1 ALL INSIDE DRAFT ANGLE: 1/2 6- DIMENSIONS ARE INCH[MM] .315 TYP. 8 .433 11 TYP. A SECTION C-C SHOWN WITH COVER 15° TYP. .203 TYP. 5.1 .146 3.7 M4 THREAD 4X 7.946 201.8 .394 TYP. 10 .276 7 3.465 88 4.415 112.1 7.402 TYP. 188 .098 2.5 2.220 56.4 A .787 20 2.953 75 SECTION A-A .717 18.2 4.724 120 B 4.252 3.465 108 88 TYP. TYP. 90° .177 4.5 .177 4.5 B COVER 7.402 TYP. 188