Connettori ITZ ITZ Connectors Contents Page2 General description 3 Technical characteristics 4 Contacts dimensions 8 Contact arrangement 21 Connector shell styles 39 Wrinkled conduit assembly instructions 40 Accessories 45 How to order Glenair Italia S.p.A. . is a certified company : UNI EN ISO 9001, AQAP 110 Glenair Italia S.p.A. reserves the right to modify this catalogue at any time . 1 ITZ 11 / 2010 General description ITZ connector series presents the same electrical characteristics as the standard IT and ITS families. Designed to be used on special amphibious military vehicles, this series evolved and replaces some of the bayonet coupling connectors in industrial and railway applications. The ITZ connector series use solder and crimp contacts in accordance with MIL-C-5015 and a trapezoidal threaded coupling system , assured by the use of rubber O-Rings. Material and finish Metal parts Aluminium alloy with cathionic electrodeposition of black paint. Contacts The following contact types are available: copper alloy with silver plating . Insulating parts High insulation synthetic rubber, resistant to oils and high range of temperatures (-55°C to +125°C). 2 Technical characteristics Contacts Tipo contatto Corrente di lavoro a 20°C Corrente di lavoro a 80°C Resist. Contatto Max. Contact size Rated current at 20°C Rated current at 80°C Max. Contact resist. 7.5 A 7.5 A 12.0 mΩ 20 10 A 7.5 A 12.0 mΩ 18 22 A 13 A 6.0 mΩ 16 41 A 23 A 3.0 mΩ 12 73 A 46 A 1.0 mΩ 8 135 A 80 A 0.5 mΩ 4 245 A 150 A 0.3 mΩ 0 350 A 225 A 0.2 mΩ 4/0 Sezione filo Wire size 20÷26 AWG 18÷26 AWG 16÷22 AWG 12-14 AWG 8-10 AWG 4-6 AWG 0÷2 AWG 4/0 AWG 350 Corrente di lavoro / Rated current ( Amp ) 300 250 #20 #18 #16 200 #12 #8 #4 150 #0 #4/0 100 50 0 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 Temp. ambiente / Ambient temperature ( °C ) Service rating Cla sse Cla ss IN S T . A D E B C W) ( Min insulating resistance : ³ 5 x 10³ MW T e nsione la voro V cc Ope ra ting volta ge V dc 250 V 700 V 1250 V 1750 V 2450 V 4200 V T e nsione la voro V ca Ope ra ting volta ge V a c R MS 200 V 500 V 900 V 1250 V 1750 V 3000 V 3 T e ns. D i prova V ca T e st volta ge V a c R MS 1000 V 2000 V 2800 V 3500 V 4500 V 7000 V Pin crimp contacts ØD ØA ØC ØB L Codice Commital Glenair Part Number Commital P/N 10 - 375 - 20 10 - 40579 10 - 40553 10 - 40553 - 13 10 - 40553 - 15 10 - 40553 - 20 10 - 40553 - 26 10 - 40557 10 - 40557 - 08 10 - 40557 - 12 10 - 40557 - 13 10 - 40557 - 15 10 - 40557 - 20 10 - 40557 - 26 10 - 40557 - 32 10 - 40561 10 - 40561 - 12 10 - 40561 - 15 10 - 40561 - 20 10 - 40561 - 22 10 - 40561 - 30 10 - 40561 - 30M 10 - 40561 - 38 Taglia Sezione mm² Size 20 0,5 18 0.15 / 0.6 16S 1 / 1.5 16S 0.15 / 0.6 16S 1 16S 2 16S 3 16 1 / 1.5 16 0.15 / 0.2 16 0.6 16 0.15 / 0.6 16 1 16 2 16 3 16 12 3 12 0.6 12 1 12 1/ 2 12 2.5 12 4 12 4 12 6 AWG 24 / 20 26 / 20 18 / 16 26 / 20 18 14 12 18 / 16 26 / 24 20 26 / 20 18 14 12 32 / 28 12 20 18 18 / 14 A +0.1 -0 1.30 1.30 1.70 1.30 1.50 2.00 2.50 1.70 0.85 1.20 1.30 1.50 2.00 2.50 0.45 2.50 1.20 1.50 2.00 2.20 3.00 3.30 3.60 B C D L ±0.1 1.93 1.93 2.60 1.93 2.60 2.90 3.80 2.60 1.55 2.60 1.93 2.60 2.90 3.80 1.95 3.90 2.60 3.40 3.80 3.80 4.80 4.20 4.80 ±0.05 1.00 1.40 1.58 1.58 1.58 1.58 1.58 1.58 1.58 1.58 1.58 1.58 1.58 1.58 1.58 2.38 2.38 2.38 2.38 2.38 2.38 2.38 2.38 ±0.1 ±0.1 24.30 29.60 26.65 26.65 26.65 26.65 26.65 31.75 31.75 31.75 31.75 31.75 31.75 31.75 31.75 37.65 37.65 37.65 37.65 37.65 37.65 37.65 37.65 2.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 Please consult our sales department for other contacts or crimp tooling details. 4 Pin crimp contacts ØD ØA ØC ØB L Codice Commita l Glenair Part Number Commita l P / N 10 - 40792 10 - 40792 - 15 10 - 40792 - 18 10 - 40792 - 26 10 - 40792 - 30 10 - 40792 - 38 10 - 40792 - 50 10 - 40792 - 58 10 - 113474 - 4P 10 - 113474 - 4P - 22 10 - 113474 - 4P - 25 10 - 113474 - 4P - 26 10 - 113474 - 4P - 30 10 - 113474 - 4P - 35 10 - 113474 - 4P - 50 10 - 113474 - 4P - 62 10 - 113474 - 1P 10 - 113474 - 1P - 107 10 - 113474 - 1P - 25 10 - 113474 - 1P - 35 10 - 113474 - 1P - 45 10 - 113474 - 1P - 50 10 - 113474 - 1P - 62 10 - 113474 - 1P - 72 10 - 113474 - 0P T a glia S ize 8 8 8 8 8 8 8 8 4 4 4 4 4 4 4 4 0 0 0 0 0 0 0 0 4/0 S e zione mm² AW G 6/8 1 1/2 3 4 6 10 13.2 22 2.5 25 3 4 35 10 16 50 / 60 50 25 35 9 10 16 8 18 18 / 14 12 107 6 4 0 8 4 4/0 A +0.1 -0 4.50 1.50 1.80 2.50 3.00 3.60 5.00 5.80 7.15 2.20 7.80 2.50 3.00 9.00 5.00 6.20 11.50 10.70 7.80 9.00 4.55 5.00 6.20 7.15 16.50 B C D L ±0.1 6.90 3.40 3.80 3.80 4.80 6.80 6.90 7.80 9.53 3.80 9.50 3.80 4.80 14.35 7.00 9.53 14.30 14.35 9.50 14.35 6.80 7.00 9.50 9.50 20.00 ±0.05 3.59 3.60 3.60 3.60 3.60 3.60 3.59 3.60 5.70 5.70 5.70 5.70 5.70 5.70 5.70 5.70 9.05 9.05 9.05 9.05 9.05 9.05 9.05 9.05 12.69 ±0.1 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 20.0 ±0.1 42.00 40.70 40.70 40.70 40.70 40.70 42.00 40.70 42.00 42.00 42.00 42.00 42.00 42.00 42.00 42.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00 63.00 Please consult our sales department for other contacts or crimp tooling details. 5 Socket crimp contacts ØD ØA ØC ØB L 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Codice Commita l Glenair Part Number Commita l P / N - 40520 LC - 40588 - 40552 - 40522 T U - 40552 - 13 - 40552 - 15 - 40552 - 20 - 40552 - 26 - 40556 - 40556 R E S - 40556 T U - 40556 - 08 - 40556 - 12 - 40556 - 13 - 40556 - 15 - 40556 - 20 - 40556 - 22 T U - 40556 - 26 - 40556 - 32 - 40560 - 40560 T U - 40560 - 12 - 40560 - 15 - 40560 - 20 - 40560 - 22 - 40560 - 30 - 40560 - 30M - 40560 - 38 T a glia S e zione mm² S ize 20 0.5 18 0.15 / 0.6 16S 1 / 1.5 16S 1 / 1.5 16S 0.15 / 0.6 16S 1 16S 2 16S 3 16 1 / 1.5 16 1 / 1.5 16 1 / 1.5 16 0.15 / 0.2 16 0.6 16 0.15 / 0.6 16 1 16 2 16 2.5 16 3 16 12 3 12 3 12 0.6 12 1 12 1/2 12 2.5 12 4 12 4 12 6 AW G 24 / 20 26 / 20 18 / 16 18 / 16 26 / 20 18 14 12 18 / 16 18 / 16 18 / 16 26 / 24 20 26 / 20 18 14 12 32 / 28 12 12 20 18 18 / 14 A +0.1 -0 1.3 1.30 1.70 1.70 1.30 1.50 2.00 2.50 1.70 1.70 1.70 0.85 1.20 1.30 1.50 2.00 2.20 2.50 0.45 2.50 2.50 1.20 1.50 2.00 2.20 3.00 3.30 3.60 B C D L ±0.1 1.93 1.93 2.60 2.60 1.93 2.60 2.90 3.80 2.60 2.60 2.60 1.55 2.60 1.93 2.60 2.90 3.80 3.80 1.95 3.90 3.80 2.60 3.40 3.80 3.80 4.80 4.20 4.80 ±0.05 1.08 1.48 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 2.48 2.48 2.48 2.48 2.48 2.48 2.48 2.48 2.48 ±0.1 2.0 2.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 ±0.1 36.50 34.40 26.60 26.60 26.65 26.65 26.65 26.65 36.50 36.50 36.50 36.50 36.50 36.50 36.50 36.50 36.20 36.50 36.50 37.65 37.50 37.65 37.65 37.65 37.65 37.65 37.65 37.65 Please consult our sales department for other contacts or crimp tooling details. 6 Socket crimp contacts ØD ØA ØC ØB L Co d ice Co mmita l Glenair Part Number 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 - Co mmita l P / N 40793 40793 - 1 40793 - 1 - 15 40793 - 1 - 18 40793 - 1 - 26 40793 - 1 - 30 40793 - 1 - 38 40793 - 1 - 50 40793 - 1 - 58 40793 - 50 40793 - M 4 113474 - 4S 113474 - 4S - 1 113474 - 4S - 1 - 22 113474 - 4S - 1 - 26 113474 - 4S - 1 - 30 113474 - 4S - 1 - 50 113474 - 4S - 1 - 62 113474 - 4S - 1 - 90 113474 - 4S - 25M 113474 - 1S 113474 - 1S / M 113474 - 1S - 107 113474 - 1S - 25 113474 - 1S - 35 113474 - 1S - 45 113474 - 1S - 50 113474 - 1S - 62 113474 - 1S - 72 113474 - 0S T a g lia S e zio ne mm² S ize 8 9 8 9 8 1 8 1/2 8 3 8 4 8 6 8 10 8 13.2 8 10 8 4 22 4 22 4 2.50 4 3 4 4 4 10 4 16 4 35 4 25 0 50 / 60 0 0 50 0 25 0 35 0 9 0 10 0 16 0 4/0 107 AW G 8 8 18 18 / 14 12 6 4 4 0 8 4 4/0 A +0.1 -0 4.50 4.50 1.45 1.80 2.50 3.00 3.60 5.00 5.50 5.00 3.00 7.10 7.10 2.20 2.50 3.00 5.00 6.20 9.00 8.00 11.50 11.50 10.70 7.80 9.00 4.55 5.00 6.20 7.15 16.50 B C D L ±0.1 6.90 6.75 3.40 3.80 3.80 4.80 6.80 6.90 7.80 6.90 5.00 9.53 9.53 3.80 3.80 4.80 7.00 9.50 14.35 9.53 14.30 14.35 14.35 9.50 14.35 6.80 7.00 9.50 9.50 20.00 ±0.05 3.73 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 3.70 5.80 5.80 5.80 5.80 5.80 5.80 5.80 5.80 5.80 9.17 10.17 9.17 9.17 9.17 9.17 9.17 9.17 9.17 12.70 ±0.1 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 20.0 ±0.1 42.00 40.50 40.50 40.50 40.50 40.50 40.50 40.50 40.50 42.00 42.00 42.00 41.00 41.00 41.00 41.00 41.00 41.00 48.00 42.00 44.60 45.30 44.60 44.60 44.60 44.60 44.60 45.30 45.30 65.90 Please consult our sales department for other contacts or crimp tooling details. 7 Contact arrangement Dimens. Contatti / Contact size n° cont. Arrang. Rating 4/ 0 0 4 8 12 16 18 20 Disposiz. Cl. isol. Dimens. Contatti / Contact size n° cont Rating 4/0 0 4 8 12 16 18 20 Disposiz. Cl. isol. Arrang. 18 - 1 I 10 -3 D 2 -4 D 4 -5 D 3 -6 D 1 - 06 A 6 -7 B 1 -8 10 22 - 33 A - 34 D 5 4 - 82 A 10 1 - A10 A 10 - A37 A 37 24 - 2 D 7 -3 A 7 -4 A 4 -5 A 16 - 06 D 6 2 2 1 4 2 1 A 8 1 7 5 -9 I 7 2 - 10 A 4 4 - 11 A 5 5 - 12 A 6 - 13 A 4 - 14 A 2 - 16 C 1 - 19 A 10 10 - 20 A 5 - 22 D 3 - 29 A 5 5 1 A 16 -9 A 2 - 10 A 7 7 - 11 A 9 3 5 - 12 A 5 3 - 013 - 16 A A 13 7 1 2 - 17 D 5 3 - 19 A 12 2 -6 D 3 -7 E 1 2 2 14 2 2 6 3 1 6 3 2 7 3 3 12 - 20 D 11 4 - 21 D 10 1 1 - 22 D 4 4 - 27 E 7 7 24 24 2 2 2 -7 2 4 16 4 7 1 5 3 8 3 6 2 1 7 D A 7 8 D D 37 A -2 -5 10 D 3 2 8 -6 22 - 1 -4 3 2 - 07 6 1 7 7 1 2 9 9 -8 E 2 2 - 28 I -9 E 3 3 - 67 A 19 4 - A1 B 1 2 - A25 A 25 25 3 - A28 I 28 28 - 10 E 4 - 11 B 2 - 12 D 5 - 13 D 5 - 14 A 19 - 15 A 6 - 16 A 9 - 17 A 9 - 18 A 8 2 19 1 1 - A55 I 55 19 -G5 A 5 5 5 1 28 - 1 A 9 3 3 6 -2 D 14 1 8 -3 E 3 8 -4 D 9 D 5 2 4 55 2 - 19 A 14 14 - 20 A 9 9 -6 D 3 3 2 -7 D 2 2 A 3 - 22 A 4 - 23 A 8 - 24 A 6 - 27 A 9 - 28 A 7 1 -8 A 12 - 09 A 9 4 -9 D 12 8 - 10 A 7 - 11 A 22 4 8 2 1 7 8 12 3 -5 - 21 6 2 7 1 2 2 10 4 5 6 2 2 6 3 4 18 Contact arrangement Dimens. Contatti / Contact size n° cont. Rating 4/0 0 4 8 12 16 18 20 Disposiz. Cl. isol. Arrang. Dimens. Contatti / Contact size n° cont. Rating 4/0 0 4 8 12 16 18 20 Disposiz. Cl. isol. Arrang. 28 - 12 A 26 26 32 - 88 A 54 54 - 13 A 26 26 - A1 A 1 - 15 A 35 35 - A3 E 3 3 - 16 A 20 20 - A5 A 5 5 - 17 A 15 15 - A25 A 25 25 - 18 I 12 12 - A27 A 27 10 17 10 20 1 - 19 A 10 4 6 - A30 A 30 - 20 A 14 10 4 - A40 A 40 40 37 - A48 I 48 48 3 - A55 A 55 55 - B22 A 22 10 40 - 1 D 30 -9 A 47 - 10 A 29 - 21 A 37 - 22 D 6 3 - 51 D 12 12 - 59 A 17 7 - 70 A 7 - 72 I 72 7 72 2 20 1 4 6 24 22 24 9 16 - 124 A 16 4 12 - 26 A 26 - A29 A 29 2 27 - 31 D 31 31 - A31 A 31 6 - 35 D 35 35 - A35 A 35 - A63 I 28 - B1 B 1 - B2 E 2 32 - 1 D 5 -2 E 5 -3 D 9 -4 A 14 -5 D 2 -6 A 23 25 9 35 - 47 A 47 - 53 A 60 60 2 3 2 3 22 - 56 A 85 85 - 62 A 60 60 A 61 -67 A 11 61 2 4 - 100 A 100 100 2 12 - 150 I 150 150 - 951 A 51 2 16 - A3 A 5 10 1 25 3 -7 I 35 7 28 - A4 A 6 4 A 30 6 24 - A5 A 5 3 -9 D 14 2 12 - A6 B 6 - 10 A 7 2 3 - A8 E 8 10 - A10 D 8 4 - A14 A 14 8 - A20 D 20 2 18 - A24 D 24 8 16 - A38 A 38 2 - 12 A 15 5 - 013 D 13 13 - 13 D 23 5 - 15 D 8 - 17 D 4 - 22 A 54 54 - A51 A 31 - 31 A 31 31 - A56 A 85 40 - A62 A 62 12 - A65 A 65 18 6 4 -59 A 42 - 68 A 16 4 2 - 689 A 9 3 - 76 A 19 - 79 D 5 6 19 4 1 9 - B4 E 4 - B8 A 8 - B19 A 19 26 2 -8 2 24 - 63 2 2 1 2 3 1 19 19 1 2 7 2 1 1 6 4 4 4 6 38 15 16 85 2 60 65 4 4 speciali 19 4 Alternate positions D isposiz. Arra ng. gradi / degrees a ±2° Disposiz. Arrang. gradi / degrees a ±2° W X W X Y Z 32 - 1 80 110 250 280 250 280 -2 70 145 215 290 250 280 -3 80 110 250 280 320 -4 80 110 250 280 280 -5 35 110 250 325 280 -6 80 110 250 280 250 280 -7 80 125 235 280 250 325 -8 80 125 235 280 280 -9 80 110 250 280 250 325 - 10 80 110 250 280 110 110 250 250 280 - 12 80 110 250 280 280 - 013 65 130 230 295 X Y Z 70 145 215 290 24 - 2 80 - 3 35 110 250 325 -3 80 110 - 4 35 110 250 325 -5 80 110 - 5 80 110 250 280 - 06 40 -6 80 - 07 80 -7 80 110 -9 35 110 - 10 80 - 11 35 110 80 80 180 - 8 70 - 9 80 290 110 250 - 10 120 240 - 11 170 265 280 110 250 Arrang. - 12 80 - 13 80 110 250 280 - 12 -16 - 14 80 110 250 280 - 17 80 110 250 280 - 13 80 110 250 280 120 240 - 20 80 110 250 280 - 15 35 110 250 280 - 21 80 110 250 280 - 17 45 110 250 - 22 45 110 250 - 27 80 - 19 280 Z gradi / degrees a ±2° 280 W 18 - 1 - 06 Y Disposiz. - 20 90 180 270 - 22 70 145 215 - 29 90 180 270 22 - 1 35 110 250 325 - 28 80 - 2 70 145 215 290 - 67 80 - A25 80 110 250 - A28 65 146 235 290 - 4 35 110 250 325 - 5 35 110 250 325 - 6 80 110 250 280 - 8 35 110 250 325 110 250 - 22 80 110 250 280 280 -59 36 108 252 324 280 - 68 65 135 225 275 335 - 76 80 110 250 280 280 - 88 80 110 250 280 - A3 22 44 285 335 - A55 80 110 250 280 - A25 60 120 28 - 1 80 110 250 280 - A27 30 115 -2 35 110 250 325 - A40 35 130 -3 70 145 215 290 - A48 80 -4 80 110 250 280 - A55 - 9 70 145 215 290 - 10 35 110 250 325 80 110 250 280 - 11 35 110 250 325 -5 35 110 250 325 - B22 35 110 250 325 - 12 80 110 250 280 -6 70 145 215 290 40 - 1 65 130 235 300 - 13 35 110 250 325 -7 35 110 250 325 -9 65 125 225 310 - 14 80 110 250 280 -8 80 110 250 280 - 10 65 125 225 310 - 15 80 110 250 280 -9 80 110 250 280 - 26 80 110 250 280 - 16 80 110 250 280 - 10 80 110 250 280 - 31 80 110 250 280 - 17 80 110 250 280 - 11 80 110 250 280 - 35 70 130 230 290 - 18 80 110 250 280 - 12 90 180 270 - 47 65 125 225 310 - 19 80 110 250 280 - 15 80 110 250 280 - 53 80 110 250 280 - 20 35 110 250 325 - 16 80 110 250 280 - 56 72 144 216 288 280 - 17 80 110 250 280 - 62 30 130 220 - 18 70 145 215 290 - 63 80 - 19 80 110 250 280 - A3 70 145 215 - 20 80 110 250 280 - A4 50 120 240 - 21 80 110 250 280 - A5 33 290 - A38 37 74 285 322 - A56 72 144 216 288 - 21 80 110 110 - 22 - 23 35 - 24 80 110 - 27 80 80 - 33 80 110 - 34 80 80 - A3 7 250 250 - 28 - A1 0 250 250 280 250 280 290 280 290 325 270 - 22 70 145 215 280 - 51 80 135 195 250 280 - 59 35 110 250 325 - A62 80 130 230 280 110 250 280 - 72 72 144 216 288 - A65 70 145 215 285 120 112 240 250 - A35 80 110 250 280 - B4 45 110 100 260 - B19 35 105 255 325 280 - A63 Insert rotation Normal position (front view) Alternate position with socket contacts 10 Alternate position with pin contacts Contact arrangement Front view of male insert 1 CONTACT ARRANGEMENT CONTACT SIZE SERVICE RATING 18-6 4 D 18-7 8 B ARRANGEMENT CONTACT SIZE SERVICE RATING 28-B1 0 B 32-A1 AWG 4/0 A ARRANGEMENT CONTACT SIZE SERVICE RATING 18-3 12 D 18-14* 1/4 , 1 / 16 A ARRANGEMENT CONTACT SIZE SERVICE RATING 24-9 4 A 18-16 12 C 22-7 0 E 24-A1 0 B 22-1 8 D 22-8* 12 E 22-11 16 B 2 CONTACTS 28-7* 4 D 28-B2 8 E 32-5 0 D 3 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 18-5 2/12 , 1/16 D 18-22 16 D 22-2 8 D 22-6* 2/8 , 1/16 D 22-9 12 E * Please consult the company CONTACT LEGEND 20 18 16 12 8 11 4 0 4/0 Contact arrangement ARRANGEMENT CONTACT SIZE SERVICE RATING 22-21 1/0 , 2/16 A 28-3 8 E 28-6 4 D 32-A3 4 E 4 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 18-4 16 D ARRANGEMENT CONTACT SIZE SERVICE RATING 22-22 8 A 18-10 12 A 18-13* 1/8 , 3/12 A 24-4 1/0 , 3/16 A 22-4 2/8 , 2/12 A 24-22 8 D 22-10 16 E 32-17 4 D 40-B4 0 E 5 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 18-11 12 A 18-20 16 A 18-29* 16 A 22-12 2/8 , 3/16 D L3 L2 24-12 2/4 , 3/12 A 24-17* 2/12 , 3/16 D 22-34 3/12 , 2/16 D N L1 ARRANGEMENT CONTACT SIZE SERVICE RATING 22-13* 4/12 , 1/16 D 24-G5 8 A 28-5* 2/4 , 1/12 , 2/16 D 32-1 2/0 , 3/12 A=E ; B,C,D,E=D * - Please consult the company CONTACT LEGEND 20 18 16 12 8 12 4 0 4/0 Contact arrangement ARRANGEMENT CONTACT SIZE SERVICE RATING 32-2* 3/4 , 2/16 E 32-79 4/4 , 1/8 D 32-A5 4 A 40-A3 1/0M , 2/0 , 2/12 A 40-A5 3/0 , 1/4 , 1/12 A 6 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 18-06 4/12 , 2/16 A 18-12 16 A 22-5 2/12 , 4/16 D S2 22-15* 5/12 , 1/16 D=E ; A,B,C,E,F=A 22-24* 2/12 , 4/16 A,B,F=A ; C,D,E=D A T3 R1 N/ B ARRANGEMENT CONTACT SIZE SERVICE RATING 24-06 4/8 , 2/16 D 28-22 3/4 , 3/16 D 40-A4 1/0M , 3/0 , 2/12 A 40-A6 16 B ARRANGEMENT CONTACT SIZE SERVICE RATING 18-9 2/12 , 5/16 I 22-28 12 A 22-33* 16 A,B,C,D=D ; E,F,G=A 24-2 12 D 24-3 2/12 , 5/16 A ARRANGEMENT CONTACT SIZE SERVICE RATING 24-07 12 D 24-10 8 A 24-16* 1/8 , 3/12 , 3/16 A,B,F,G=D ; C,D,E=A 24-27 16 E 28-10 2/4 , 2/8 , 3/12 G=D ; Bal=A 7 CONTACTS * - Please consult the company CONTACT LEGEND 20 18 16 12 8 13 4 0 4/0 Contact arrangement ARRANGEMENT CONTACT SIZE SERVICE RATING 28-70 8 A 32-10* 2/4 , 2/8 , 3/16 A,F=E ; B,E=D ; C,D=A ; G=B 18-8 1/12 , 7/16 A 22-18 16 A,B,F,G,H=D ; C,D,E=A 8 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 22-23 12 H=D ; Bal=A 24-6 12 A,G,H,=D ; Bal=A 32-15 2/0 , 6/12 D A B H G C D F E ARRANGEMENT CONTACT SIZE SERVICE RATING 40-A8 4/0, 4/16 E 40-A10 4/4 , 4/16 D 40-B8 4/16, 4/special A 9 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 22-16* 3/12 , 6/16 A ARRANGEMENT CONTACT SIZE SERVICE RATING 28-1 3/8 , 6/12 A,J,E=D Bal=A * - Please consult the company CONTACT LEGEND 20 18 16 22-17 1/12 , 8/16 A=D ; Bal=A 22-20 16 A 28-4* 2/12 , 7/16 G,P,S=E ; Bal=D 28-09 4/4 , 5/16 A 12 8 14 4 22-27 1/8 , 8/16 J=D ; Bal=A 24-11 3/8 , 6/12 A 32-3* 1/0 , 2/4 , 2/12 , 4/16 D 32-689 3/4 , 6/16 A 0 4/0 Contact arrangement 10 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 18-1 16 B,C,F,G=A ; Bal=I 18-19 16 A 22-82 8/16 , 2/8 A ARRANGEMENT CONTACT SIZE SERVICE RATING 24-21* 1/8 , 9/16 D 28-19 4/12 , 6/16 A,B=D ; K,M=B ; Bal=A 24-20 2/12 , 9/16 D 40-67 10/4 , 1/16 A 22-A10 16 A 11 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING J A K H ARRANGEMENT CONTACT SIZE SERVICE RATING E 24-19 16 A 28-8* 2/12 , 10/16 B=D; L,M=E; Bal=A 28-9 6/12 , 6/16 D 28-18 16 A,B=A; G,H,J,K,L=D;M=C; Bal=I C M F 12 CONTACTS B L N D 28-51 12 D 13 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 24-013* 6/12 , 7/16 A 32-013 12 D * - Please consult the company CONTACT LEGEND 20 18 16 12 8 15 4 0 4/0 Contact arrangement 14 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 22-19 16 A 28-2 2/12, 12/16 D 8 28-20 10/12, 4/16 A 32-4 2/12, 12/16 F, J, K, N=A; Bal=D 32-9 2/4, 12/16 D 28-17 16 M,N,P=D; R=B; Bal=A 32-12* 5/12 , 10/16 C,D,E,F,G,=A; Bal=D 1 7 9 13 10 2 14 11 6 3 12 15 CONTACTS 4 5 ARRANGEMENT CONTACT SIZE SERVICE RATING 40-A14 6/12, 8/4 A L M N P 16 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 17 CONTATTI 17 CONTACTS 24-5 16 A 24-7 2/12, 14/16 A 28-124 12/16 , 4/8 A 32-68 4/4 , 12/16 A 1 4 8 19 CONTACTS 17 ARRANGEMENT CONTACT SIZE SERVICE RATING 22-14 16 A 24-67 12 A 12 20 10 15 18 16 9 11 20 18 16 F J K D H 28-59 7/12, 10/16 A 15 18 12 16 19 40-B19 8 A 3 4 17 8 7 5 22 CONTACTS 6 ARRANGEMENT 28-16 40-A20 CONTACT SIZE 16 2/8, 18/12 SERVICE RATING A D Consultare l’azienda / Please consult the company ** -- Please consult the company CONTACT LEGEND E C 2 19 11 20 CONTACTS 10 32-76 12 A 1 14 13 B U 7 6 14 13 A T S 3 2 5 9 R 28-11 4/12 , 18/16 A 12 8 16 4 0 32-B22 2/4 , 20/16 A 4/0 Contact arrangement 1 16 15 2 17 3 23 14 4 18 13 22 24 5 12 23 CONTACTS 24 CONTACTS 19 21 6 11 20 7 10 9 ARRANGEMENT CONTACT SIZE SERVICE RATING 32-6 2/4, 3/8, 2/12, 16/16 A 32-13 5/12, 18/16 D 24-A25 16 A 32-A25 12 A 24-28 16 I 8 40-A24 8/8, 16/12 D 25 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 10 0° M L K N P Z Y X J a R W b d H S G A 27 CONTACTS U B F D 28-12 16 A C E ARRANGEMENT CONTACT SIZE SERVICE RATING T V 26 CONTACTS 28-13 16 A 40-26 7/8 , 19/12 A 28 CONTACTS 32-A27 10/12, 17/16 A 29 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 24-A28 16 I 28-A63 9/12 , 19/16 I 28-A29 2/8, 27/16 A 40-10 4/4 , 9/8 , 16/16 A 30 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 32-8 6/12 , 24/16 A 32-A30 10/12 , 20/16 A * - Please consult the company CONTACT LEGEND 20 18 16 12 8 17 4 0 4/0 Contact arrangement 31 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 40-1 6/12, 20/16 D 28-A31 6/8, 25/20 A 32-31 16 A 40-31 12 D 28-15 16 A 28-A35 16 A 32-7 7/12 , 28/16 A,B,h,j=I; Bal=A 22-A37 18 A 28-21 16 A 35 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 40-A51 15/8 , 16/16 A 37 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 40-35 12 D Y A X W 38 CONTACTS 40 CONTACTS -v S - R s - -c E F j t 40-A38 12 A g h M L 42 CONTACTS H f i N Y u - P ARRANGEMENT CONTACT SIZE SERVICE RATING D b d k - X C a -w m T Z n V U B Z q p - W J K 32-A40 16 A 32-59 2/8, 40/16 A * - Please consult the company CONTACT LEGEND 20 18 16 12 8 18 4 0 4/0 Contact arrangement 47 CONTACTS 48 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 40-9 1/8 , 22/12 , 24/16 A 40-47 1/8 , 22/12 , 24/16 A 51 CONTACTS 54 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 40-951* 25/12 , 26/16 A 32-22 16 A D 6 10 13 17 11 14 18 32 31 35 24 28 36 33 41 40 44 47 ARRANGEMENT CONTACT SIZE SERVICE RATING 34 39 43 42 X b 50 R a e d j h n t q u z AD r v y x w f k p s W V Z Y c g m J M P U AB 46 49 AA 60 CONTACTS AC AE 53 52 54 30 38 45 48 51 21 25 29 37 T S 16 20 19 27 O N 12 E H L K 9 15 23 22 26 5 8 7 G F 4 32-88 16 A B A C 2 1 3 55 CONTACTS 32-A48 16 I 55 AF 24-A55 20 I AG 32-A55 16 A 40-53 16 A 40-62 16 A 62 CONTACTS 61 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 40-63 16 A 40-A62 2/8 , 60/16 A * - Please consult the company CONTACT LEGEND 20 18 16 12 8 19 4 0 4/0 Contact arrangement 1 2 4 20 25 30 55 43 44 48 49 52 53 56 63 38 42 58 57 60 59 61 62 64 65 68 67 40-A65 16 A 34 37 69 71 70 72 28-72 20 I 1 8 16 25 35 36 56 85 CONTACTS 100 CONTACTS 68 69 78 77 86 40-56 16 A 80 40-A56 16 A 89 88 87 95 72 81 96 83 91 98 54 74 73 45 55 65 66 76 75 84 92 99 34 44 64 63 82 90 97 53 52 24 33 43 42 62 15 23 32 31 51 71 70 22 41 61 60 79 94 50 49 59 30 7 14 13 21 40 39 6 5 12 20 29 28 48 58 57 11 19 38 37 4 3 10 18 27 47 67 2 9 17 26 46 ARRANGEMENT CONTACT SIZE SERVICE RATING 33 47 51 54 28 27 32 41 66 ARRANGEMENT CONTACT SIZE SERVICE RATING 23 26 46 50 19 22 36 40 45 72 CONTACTS 14 18 31 35 39 65 CONTACTS 10 13 17 21 24 7 6 9 12 16 29 3 5 8 11 15 85 93 100 40-100 18 A 150 CONTACTS ARRANGEMENT CONTACT SIZE SERVICE RATING 40-150 18 I * - Please consult the company CONTACT LEGEND 20 18 16 12 8 20 4 0 4/0 ITZ 3100 A ... CRG_ _ / ITZ 3100 R ... CRG_ _ ITZ 4100 A ... CRG_ _ / ITZ 4100 R ... CRG_ _ Wall mounting receptacle M K qR T ØC Fil. A B qS L Ex.: ITZ3100R22-14PCRG21.2 T a glia Size 18 22 24 28 T a glia CR G File tto A CR G size A thre a d 11.7 / 15.8 11.7 / 21.2 21.2 / 28.3 21.2 / 28.3 Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 B C min min 9 9 9 9 8.5 / 11 8.5 / 15 15 / 22 15 / 22 K L M +0.2 ±0.2 Ma x -0 4.0 95 19.1 4.0 95 19.6 4.0 100 20.6 4.0 100 20.7 R S ±0.1 ±0.2 27.00 31.75 34.90 39.70 35.0 41.0 44.5 50.9 T +0.1 -0 3.2 3.2 3.7 3.7 Fixed connector with square flange, for front panel mounting, for use with plastic conduits. Class A: no grommet supplied. Class R: includes sealing grommet. 21 ITZ 3100 A ... D2_ _ / ITZ 3100 R ... D2_ _ ITZ 4100 A ... D2_ _ / ITZ 4100 R ... D2_ _ Wall mounting receptacle M K qR T OC Fil. A B L qS Ex.: ITZ3100R22-14PD22722 T a glia Size 18 22 24 28 32 40 U N I4883 Conduits 2722 2722 3328 3328 3833 5045 File tto A A thre a d Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 B C min min 9 9 9 9 9 9 20.5 20.5 26.5 26.5 31.5 43.5 K L ±0.2 Ma x 4.0 4.0 4.0 4.0 4.0 4.0 103.0 103.0 104.5 111.0 116.5 122.0 M +0.2 -0 19.1 19.6 20.6 20.7 22.3 22.3 R S ±0.1 ±0.2 27.00 31.75 34.90 39.70 44.45 55.50 35.0 41.0 44.5 50.9 57.0 69.9 T +0.1 -0 3.2 3.2 3.7 3.7 4.3 4.3 Fixed connector with square flange, for front panel mounting, for use with UNI 4883 rubber conduits. Class A: no grommet supplied. Class R: includes sealing grommet. 22 ITZ 3100 A ... FM PM_ _ ITZ 4100 A ... FM PM_ _ Wall mounting receptacle M T K qR Fil. A Fil. M B L qS Ex.: ITZ3100A22-14PPM20 T a glia Size 18 22 24 28 32 40 B File tto M M thre a d File tto A A thre a d min M 16 x 1,5 M 20 x 1,5 M 20 x 1,5 M 25 x 1,5 M 32 x 1,5 M 40 x 1,5 Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 9 9 9 9 9 9 K L M +0.2 ±0.2 Ma x -0 4.0 71 19.1 4.0 75 19.6 4.0 77 20.6 4.0 81 20.7 4.0 87 22.3 4.0 97 22.3 R S ±0.1 ±0.2 27.00 31.75 34.90 39.70 44.45 55.50 35.0 41.0 44.5 50.9 57.0 69.9 T +0.1 -0 3.2 3.2 3.7 3.7 4.3 4.3 Fixed connector with square flange, for front panel mounting with adaptor for metric cable glands (not included). Other types of adaptors can be supplied in various sizes upon request. No grommet supplied. 23 ITZ 3100 A ... PHM_ _ ITZ 4100 A ... PHM_ _ Wall mounting receptacle M qR T K OC Fil. A B qS L Ex.: ITZ3100A22-14PPHM18 T aglia Size P.N. PHM Filetto A A thread 18 22 24 28 32 40 18 18 18 18 / 22 22 / 24 35 Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 B C K L M +0.2 min min - max ±0.2 Max -0 9 2÷16.5 4.0 70 19.1 9 2÷16.5 4.0 70 19.6 9 2÷16.5 4.0 80 20.6 9 2÷16.5 / 15÷20 4.0 80 20.7 9 15÷20 / 19÷24 4.0 80 22.3 9 23÷35 4.0 95 22.3 R S ±0.1 ±0.2 27.00 31.75 34.90 39.70 44.45 55.50 35.0 41.0 44.5 50.9 57.0 69.9 T +0.1 -0 3.2 3.2 3.7 3.7 4.3 4.3 Fixed connector with square flange, for front panel mounting. Includes a PHM cable clamp that assures an excellent mechanical and waterproof seal if used with the correct neoprene sealing sleeves. No grommet supplied. 24 ITZ 3102 R ITZ 4102 R Wall mounting receptacle M K qR T OC Fil. A B qS L Ex.: ITZ3102R22-14P T a glia Size 18 22 24 28 32 40 File tto A A thre a d Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 B min. 9 9 9 9 9 9 C +0.2 -0 25.2 31.7 34.9 41.4 47.8 58.7 K L ±0.2 ±0.2 4.0 4.0 4.0 4.0 4.0 4.0 34.2 34.2 35.7 35.7 37.3 37.3 M +0.2 -0 19.1 19.6 20.6 20.7 22.3 22.3 R S ±0.1 ±0.2 27.00 31.75 34.90 39.70 45.55 55.50 35.0 41.0 44.5 50.9 57.0 69.9 Fixed connector with square flange, for front panel mounting. 25 T 3.2 3.2 3.7 3.7 4.3 4.3 ITZ 3103 R ITZ 4103 R Box mounting receptacle M K Fil. T qR OC Fil. A B qS L Ex.: ITZ3103R22-14P Taglia Size 18 22 24 28 32 40 Filetto A A thread Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 B C K L M R +0.2 +0.2 min. ±0.2 ±0.2 ±0.1 -0 -0 9 25.2 4.0 34.2 23.2 27.00 9 31.7 4.0 34.2 23.2 31.75 9 34.9 4.0 35.7 23.2 34.90 9 41.4 4.0 35.7 24.4 39.70 9 47.8 4.0 37.3 24.2 45.55 9 58.7 4.0 37.3 24.4 55.50 Fixed connector with square flange, for rear panel mounting. 26 S Fil. T ±0.2 T thread 35.0 41.0 44.5 50.9 57.0 69.9 M4 M4 M4 M5 M5 M5 ITZ 31030 A ... CRG_ _ / ITZ 31030 R ... CRG_ _ ITZ 41030 A ... CRG_ _ / ITZ 41030 R ... CRG_ _ Box mounting receptacle M K qR Fil. T OC Fil. A B qS L Ex.: ITZ31030A22-14PCRG21.2 T a glia Size 18 22 24 28 T a glia CR G File tto A CR G size A thre a d 11.7 / 15.8 11.7 / 21.2 21.2 / 28.3 21.2 / 28.3 Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 B C min min 9 9 9 9 8.5 / 11 8.5 / 15 15 / 22 15 / 22 K L M +0.2 ±0.2 Ma x -0 4.0 100 23.2 4.0 100 23.2 4.0 105 23.2 4.0 105 24.4 R S ±0.1 ±0.2 27.00 31.75 34.90 39.70 35.0 41.0 44.5 50.9 Fil.T +0.1 -0 M4 M4 M4 M5 Fixed connector with square flange, for rear panel mounting, for use with plastic conduits. Class A: no grommet supplied. Class R: includes sealing grommet. 27 ITZ 31030 A ... D2_ _ / ITZ 31030 R ... D2_ _ ITZ 41030 A ... D2_ _ / ITZ 41030 R ... D2_ _ Box mounting receptacle M K qR Fil. T OC Fil. A B qS L Ex.: ITZ31030A22-14PD22722 Taglia Size UNI4883 Conduits 18 22 24 28 32 40 2722 2722 3328 3328 3833 5045 Filetto A A thread Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 B C min min 9 9 9 9 9 9 20.5 20.5 26.5 26.5 31.5 43.5 K L ±0.2 Max 4.0 4.0 4.0 4.0 4.0 4.0 108.0 108.0 109.5 116.0 121.5 127.0 M +0.2 -0 23.2 23.2 23.2 24.4 24.2 24.4 R S 27.00 31.75 34.90 39.70 44.45 55.50 35.0 41.0 44.5 50.9 57.0 69.9 Fil. T ±0.1 ±0.2 T thread M4 M4 M4 M5 M5 M5 Fixed connector with square flange, for rear panel mounting, for use with UNI 4883 rubber conduits. Class A: no grommet supplied. Class R: includes sealing grommet. 28 FM _ ITZ 31030 A ... PM_ FM _ ITZ 41030 A ... PM_ Box mounting receptacle M K qR Fil. T Fil. A Fil. M B qS L Ex.: ITZ31030A22-14PPM20 Taglia Size Filetto M M thread Filetto A A thread 18 22 24 28 32 40 M 16 x 1,5 M 20 x 1,5 M 20 x 1,5 M 25 x 1,5 M 32 x 1,5 M 40 x 1,5 Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 B min 9 9 9 9 9 9 K L M +0.2 ±0.2 Max -0 4.0 76 23.2 4.0 80 23.2 4.0 82 23.2 4.0 86 24.4 4.0 92 24.2 4.0 102 24.4 R S 27.00 31.75 34.90 39.70 44.45 55.50 35.0 41.0 44.5 50.9 57.0 69.9 Fil. T ±0.1 ±0.2 T thread M4 M4 M4 M5 M5 M5 Fixed connector with square flange, for rear panel mounting with adaptor for metric cable glands (not included). Other types of adaptors can be supplied in various sizes upon request. No grommet supplied. 29 ITZ 31030 A ... PHM_ _ ITZ 41030 A ... PHM_ _ Box mounting receptacle M K qR Fil. T OC Fil. A B L qS Ex.: ITZ31030A22-14PPHM18 Taglia Size P.N. PHM 18 22 24 28 32 40 18 18 18 18 / 22 22 / 24 35 Filetto A A thread Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 B C K L M +0.2 min min - max ±0.2 Max -0 9 2÷16.5 4.0 75 23.2 9 2÷16.5 4.0 75 23.2 9 2÷16.5 4.0 85 23.2 9 2÷16.5 / 15÷20 4.0 85 24.4 9 15÷20 / 19÷24 4.0 85 24.2 9 23÷35 4.0 100 24.4 R S 27.00 31.75 34.90 39.70 44.45 55.50 35.0 41.0 44.5 50.9 57.0 69.9 Fil. T ±0.1 ±0.2 T thread M4 M4 M4 M5 M5 M5 Fixed connector with square flange, for rear panel mounting. Includes a PHM cable clamp that assures an excellent mechanical and waterproof seal if used with the correct neoprene sealing sleeves. No grommet supplied. 30 ITZ 3106 A ... CRG_ _ / ITZ 3106 R ... CRG_ _ ITZ 4106 A ... CRG_ _ / ITZ 4106 R ... CRG_ _ OC Fil. A Straight plug OQ L Ex. : ITZ3106A22-14PCRG21.2 T a glia Size 18 22 24 28 T a glia CR G File tto A CR G size A thre a d 11.7 / 15.8 11.7 / 21.2 21.2 / 28.3 21.2 / 28.3 Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Straight plug, for use with plastic conduits. Class A: no grommet supplied . Class R: includes sealing grommet. 31 C min 8.5 / 11 8.5 / 15 15 / 22 15 / 22 L Q Ma x. ±0.1 100 100 105 105 36.0 39.5 46.7 46.7 50.2 50.2 56.5 56.5 ITZ 3106 A ... D2_ _ / ITZ 3106 R ... D2_ _ ITZ 4106 A ... D2_ _ / ITZ 4106 R ... D2_ _ OC Fil. A Straight plug OQ L Ex.: ITZ3106A22-14PD22722 T a glia Size 18 22 24 28 32 40 U N I 4883 Conduits 2722 2722 3328 3328 3833 5045 File tto A A thre a d C L Q min Ma x. ±0.1 Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 20.5 20.5 26.5 26.5 31.5 43.5 103.0 103.0 104.5 111.0 116.5 122.0 36.0 39.5 46.7 46.7 50.2 50.2 56.5 56.5 60 64.0 72 77.0 Straight plug, for use with UNI 4883 rubber conduits. Class A: no grommet supplied . Class R: includes sealing grommet. 32 FM _ ITZ 3106 A ... PM_ FM _ ITZ 4106 A ... PM_ Fil. A Fil. M Straight plug L OQ Ex.: ITZ3106A22-14PPM20 T a glia S ize 18 22 24 28 32 40 File tto M M thre a d M 16 x 1,5 M 20 x 1,5 M 20 x 1,5 M 25 x 1,5 M 32 x 1,5 M 40 x 1,5 L Q File tto A A thre a d Ma x. ±0.1 Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 72 75 77 82 87 97 36 39.5 43 46.7 46 50.2 53 56.5 60 64.0 72 77.0 Straight plug, with adaptor for metric cable glands (not included). Other types of adaptors can be supplied in various sizes upon request. No grommet supplied. 33 ITZ 3106 A ... PHM_ _ ITZ 4106 A ... PHM_ _ OC Fil. A Straight plug OQ L Ex.: ITZ3106A22-14PPHM18 T a glia S ize 18 22 24 28 32 40 File tto A A thre a d C L Q P.N . PH M min - ma x Ma x. ±0.1 18 18 18 18 / 22 22 / 24 35 Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 2÷16.5 2÷16.5 2÷16.5 2÷16.5 / 15÷20 15÷20 / 19÷24 23÷35 70 70 80 80 80 95 36 39.5 46.7 46.7 50.2 50.2 56.5 56.5 60 64.0 72 77.0 Straight plug. Includes a PHM cable clamp that assures an excellent mechanical and waterproof seal if used with the correct neoprene sealing sleeves. No grommet supplied. 34 ITZ 3108 A ... CRG_ _ / ITZ 3108 R ... CRG_ _ ITZ 4108 A ... CRG_ _ / ITZ 4108 R ... CRG_ _ 90° plug OQ U Fil. A L OC Ex.: ITZ3108A22-14PCRG21.2 T a glia Size 18 22 24 28 T a glia CR G File tto A A thre a d CR G size 11.7 / 15.8 11.7 / 21.2 21.2 / 28.3 21.2 / 28.3 Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 C L min. ±0.2 ±0.1 Ma x. 8.5 / 11 8.5 / 15 15 / 22 15 / 22 34.2 34.2 35.7 35.7 36 39.5 46.7 46.7 50.2 50.2 56.5 56.5 Plug with 90° backshell, for use with plastic conduits. Class A: no grommet supplied. Class R: includes sealing grommet. 35 Q U 59 60 60 65 ITZ 3108 A ... D2_ _ / ITZ 3108 R ... D2_ _ ITZ 4108 A ... D2_ _ / ITZ 4108 R ... D2_ _ 90° plug OQ U Fil. A L OC Ex.: ITZ3108A22-14PD22722 T a glia Size U N I 4883 Conduits 18 22 24 28 32 40 2722 2722 3328 3328 3833 5045 File tto A A thre a d C L Q min. ±0.2 ±0.1 Ma x. Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 20.5 20.5 26.5 26.5 31.5 43.5 34.2 34.2 35.7 35.7 72.0 77.5 36 39.5 46.7 46.7 50.2 50.2 56.5 56.5 60 64.0 72 77.0 Plug with 90° backshell, for use with UNI 4883 rubber conduits. Class A: no grommet supplied. Class R: includes sealing grommet. 36 U 80.0 82.0 87.0 88.0 95.5 102.0 ITZ 3108 A ... PM_ _ ITZ 4108 A ... PM_ _ 90° plug OQ U Fil. A L Fil. M Ex.: ITZ3108A22-14PPM20 T a glia S ize 18 22 24 28 32 40 L Q U File tto M M thre a d File tto A A thre a d ±0.2 ±0.1 Ma x. M 16 x 1,5 M 20 x 1,5 M 20 x 1,5 M 25 x 1,5 M 32 x 1,5 M 40 x 1,5 Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 34.2 34.2 35.7 35.7 72.0 77.5 36 39.5 46.7 46.7 50.2 50.2 56.5 56.5 60 64.0 72 77.0 59 60 60 65 78 90 Plug with 90° backshell and adaptor for metric cable glands (not included). Other types of adaptors can be supplied in various sizes upon request. No grommet supplied. 37 ITZ 3108 A ... PHM_ _ ITZ 4108 A ... PHM_ _ 90° plug OQ U Fil. A L OC Ex.: ITZ3108A22-14PPHM18 T a glia Size 18 22 24 28 32 40 P.N . PH M 18 18 18 18 / 22 22 / 24 35 C L min - ma x ±0.2 ±0.1 Ma x. 2÷16.5 2÷16.5 2÷16.5 2÷16.5 / 15÷20 15÷20 / 19÷24 23÷35 34.2 34.2 35.7 35.7 72.0 77.5 36 39.5 46.7 46.7 50.2 50.2 56.5 56.5 60 64.0 72 77.0 File tto A A thre a d Tr 30 x 3 Tr 37 x 3 Tr 40 x 3 Tr 46 x 3 Tr 53 x 3 Tr 65 x 2 Q U 47.0 49.0 58.0 59.0 70.5 77.0 Plug with 90° backshell. Includes a PHM cable clamp that assures an excellent mechanical and waterproof seal if used with the correct neoprene sealing sleeves. No grommet supplied. 38 CRG_ _ Wrinkled conduit assembly instructions 2 4 1 5 3 Arrange the components of the adaptor over the conduit as shown. Place the O-ring on the 2nd cavity of the conduit. Put the edge of the conduit on the adaptor and push until it stops, helping the insertion of the O-ring with the fingers. Place the cone against the adaptor. Thread the nut on the adaptor with the right keys. 39 ITZ 06 T - XX Cap for plug connectors F L W G A Dimensione Guscio Shell size 22 24 28 32 40 A max ØG max L min ØF +0.2 -0 W 30 30 30 30 32.5 45 50 54 60 74.2 150 150 150 150 150 4.4 4.4 4.4 4.4 4.4 Tr 37x3 Tr 40x3 Tr 46x3 Tr 53x3 Tr 65x3 Metal cap with stainless steel chain. 40 ITZ 02 T - XX Cap for receptacle connectors F L W G A Dimensione Guscio Shell size 22 24 28 32 40 Metal cap with stainless A max ØG max L min ØF +0.2 -0 W 18 18 18 18 20.5 42 45 52 58 70 150 150 150 150 150 4.4 4.4 4.4 4.4 4.4 Tr 37x3 Tr 40x3 Tr 46x3 Tr 53x3 Tr 65x3 steel chain. 41 IT 90376 - XX Y/R TP02 - XX Protective plastic cap ØB ØA ØC Codice P .N . T P 02-14S IT 90376-20Y IT 90376-22Y IT 90376-24R IT 90376-24Y T P 02-24 T P 02-24 T P 02-28 IT 90376-28R T P 02-32 IT 90376-36R T P 02-40 D ime ns. Guscio S he ll size Plug 18 Receptacle 18 Plug 22 Receptacle 22 Plug 24 Receptacle 24 Plug 28 Receptacle 28 Plug 32 Receptacle 32 Plug 40 Receptacle 40 Cap for protection against dust. 42 ØA ±0.25 24.40 29.21 32.26 37.16 35.30 40.65 40.65 46.45 43.56 53.15 56.26 65.25 ØB ±0.25 27.05 30.86 34.04 38.94 37.08 43.20 43.20 49.05 45.46 55.75 58.16 67.85 ØC ±0.78 30.00 35.71 38.10 43.18 41.66 47.00 47.00 52.00 49.53 60.00 61.85 72.00 IT 40450 - XX Gasket for fixed connectors qR ØA 1 ±0.4 qS ØT Codice Commita l Commita l P/ N IT 40450 - 18 IT 40450 - 22 IT 40450 - 24 IT 40450 - 28 IT 40450 - 32 IT 40450 - 40 D im. guscio She ll size 18 22 24 28 32 40 ØA +1 28.4 34.8 38.0 44.3 50.7 61.9 R ±0.2 27.0 31.8 34.9 39.7 44.5 55.5 Gasket for front panel mounting receptacle, non conductive. 43 S ±0.5 35.0 41.0 44.5 50.8 57.0 69.9 ØT +0.5 4.2 4.2 4.2 5.1 5.1 5.1 IT 40460 - XX Gasket for fixed connectors qR ØA 1 ±0.4 qS ØT Codice Commita l Commita l P/ N IT 40460 - 18 IT 40460 - 22 IT 40460 - 24 IT 40460 - 28 IT 40460 - 32 IT 40460 - 40 D im. guscio She ll size 18 22 24 28 32 40 ØA +0.3 30.8 37.4 40.9 46.7 53.4 65.5 R ±0.2 27.0 31.8 34.9 39.7 44.5 55.5 S ±0.5 35.0 41.0 44.5 50.8 57.0 69.9 Gasket for square flange receptacle for rear panel mounting, non conductive. 44 ØT +0.5 4.2 4.2 4.2 5.1 5.1 5.1 HOW TO ORDER FR ITZ 31 06 R 22-14 S X 1 2 3 4 5 6 7 1 Omitted : Standard FR : Fire resistant rubber 2 ITZ ... H : Threaded coupling connector 3 31 : Solder contacts 41 : Crimp contacts 4 Style : 00 - 02 - 06 - 08 5 Class : A ... CRG - A ... D2 - A ... PM FM - A ... PHM - A R... 02 - R ... CRG - R ... D2 - R 6 Contact arrangement 7 P : Pin contacts S : Socket contacts 8 W - X - Y - Z : Alternate positions of the inserts 9 Modifications (see below) MODIFICATIONS Special part numbers Contacts Omitted for standard version ( silver plated ) B0 : Connector less contacts B1 : Connector with gold plated contacts Backshells Omitted for standard version ( . . . ) N0 : Connector less backshell Platings Omitted for standard version (non conductive black) F7 : Cadmium free conductive black 45 8 CRG21.2 ( . . . ) H 5 9 2 Worldwide Sales Network Via Cà Dell’Orbo Nord, 22 Glenair Italia S.p.A. 40055 Villanova di Castenaso - Italy Tel. del +39 Lavoro, 051 782811 Fax +39 051 782259 Via 7 - -40057 Quarto Inferiore [email protected] Granarolo dell’Emilia - Bologna, Italy Tel.: +39-051-782811 - Fax: +39-051-782259 [email protected] For more information concerning our international presence www.glenair.com - www.glenair.it