AMPHENOL ACRMS02

MS & 97B - Series
ACRMS02 0313
I
ntroduction & Page Contents
Introduction
Amphenol MS & 97B series are two series of thread & Bayonet coupled connectors
designed to meet the operating requirements of MIL-C-5015. available in a variety of styles
& classes, these connectors are primarily used in a range of military and industrial
applications where specific degrees of environmental protection are required.
Although MS series have identical insert arrangements and other similar components
parts, the two series differ in that Amphenol MS series of connectors are also qualified to
meet the operating requirements of Defence Standard Joint Services Specifications
JSS50812, issued by the Electronics Components Standardization Organisation (LCSO)
Amphenol 97B connectors feature a quick a mating bayonet coupling with an audible full
mating feature. This series uses the same MIL-C-5015 insert patterns and are used in high
shock and vibration environments encountered in commercial, geophysical, aerospace,
ground support and shipboard applications.
Content
Page
1
Introduction
2-3
Connector style
General description
4
Electrical data
5
Insert orientations
6
Insert arrangements
7-17
MS threaded series connector
19-22
97B reverse bayonet connector
23-49
Ordering information
50
1
C
onnector Styles
Class F
MS-3108
MS-4108
Class A=R
MS-3106
MS-4106
Class A
MS-3100
MS-4100
Class E and F
MS-3101
MS-4101
Class R
cable
clamp
back
shell
grommet
sleeve
2
grommet
MS-3102
MS-4102
C
onnector Styles
Class F
97B - 3108
97B - 4108
Class A=R
97B - 3106
97B - 4106
Class A
97B - 3100
97B - 4100
Class F
97B - 3101
97B - 4101
97B - 3103
97B - 4103
Class R
cable
clamp
back
shell
grommet
sleeve
grommet
97B - 3102
97B - 4102
3
G
eneral Description
These electrical connectors are designated MS
because the interchangeability and operating
characteristics are determined by U.S. Military
Specifications. These specifications are revised
from time to time to incorporate performance
requirements dictated by design advances and
more stringent requirements of allied equipment.
The several designations of MS and 97B
connectors meet different requirements of MILC-5015. These designations and general
descriptions are as follows :
Inserts and grommet
Synthetic inserts and grommet manufactured
according to MIL-R-3065, offer high dielectric
strength and are resistant to oils, gasoline and low
temperature. DAP is dimensionally stable, has high
arc resistance and high insulation resistance under
both humidity and thermal stress.
General description
Plugs are available in A, F and R types. Receptacles
are available in A, E, F and R types.
Shell
Shell constructions include solid back shell (A)
and environmental resistant (E, F & R).
Environmental resistant connectors provide a
moisture barrier and assure a positive seal. Shell
styles consist of wall type receptacles (3100),
cable receptacles (3101), box receptacles
(3102), straight plugs (3106) and angle plugs
(3108). Shell hardware is manufactured from
aluminium alloy and cadmium plated with olive
drab chromate finish. This finish has excellent
conductivity; it is non-reflecting and corrosion
resistant. Black anodised finish and cadmiumfree zinc plating with olive drab chromate finish
are also available. For details, contact factory.
Contacts
Pin and socket contacts are of brass and
generally silver plated. Gold plating is also
available. For details contact factory. These
contacts are available for solder or crimp
termination. Special arrangements of contacts
for pre-mating and pre-earth are also available.
A Solid back shell
Intended for general service usage to provide
convenient means of connecting and disconnecting
electrical circuits in industrial and military
applications.
Environmental resisting
Intended for use where the connector will be subject
to heavy condensation and rapid changes in
temperature or pressure and/or where the connector
is subjected to high vibratory conditions.
E
Environmental resisting with grommet seal and
strain relief backshell except for 3102 type.
F
Environmental resisting with grommet seal,
strain relief backshell and front gasket seal for plug
type.
R
Environmental resisting with grommet seal,
shorter and lightweight.
Features for 97B reverse bayonet coupling connectors
with Mil-C-5015 insert patterns:
Available in both crimp and solder terminations
Contacts available in gold and silver plating
Numerous finishes available
Zinc alloy plating (cadmium free) available
Quick positive coupling
Audible and tactile indication of full coupling
Waterproof
No lockwiring required
High shock and vibration capabilities
Rugged construction; aluminum or stainless
steel components
Intermateable with existing VG95234
connectors
500 couplings minimum
Insert available in Neoprene material (alternate
inserts materials available upon request)
Operating temperature range with Neoprene
0
inserts: -55C
to +125C0
4
E
lectrical Data
Dielectric strength
Service rating
Test Voltage
Vac rms
Inst.
1000V
A
2000V
D
2800V
E
3500V
B
4500V
C
7000V
Contact rating
Contact
Size
Rated
Current
Contact
Resistance
miliohms
16
13A
3.46
12
23A
1.83
8
46A
0.52
4
80A
0.26
0
150A
0.14
Service rating
Operating Voltage
DC at Sea Level
Operating Voltage
AC at Sea Level
Inst.
250V
200V
A
700V
500V
D
1250V
900V
E
1750V
1250V
B
2450V
1750V
C
4200V
3000V
Service rating
5
I
nsert Orientation
To avoid cross-plugging problems in applications
requiring the use of more than one connector of
the same size and arrangement, alternate insert
rotations are available as indicated in the
accompanying chart.
The following insert arrangements have the same
alternate insert rotations for W, X, Y and Z which
are as below :
Degree
As shown in the daigram below, the front face of
the pin insert is rotated within the shell in a
clockwise direction from the normal shell key. The
socket insert would be rotated counterclockwise
the same number of degrees with respect to the
normal shell key.
B
B
Position W
Position X
B
B
A
A
Position Y
Position Z
Views looking into front face of pin insert or rear
of socket insert
Insert
Arrangement
12S-3
14S-2
14S-5
14S-7
14S-9
16-9
16-10
16-11
16-13
16S-1
16S-4
16S-5
16S-6
16S-8
18-1
18-3
18-4
18-8
18-10
18-11
18-12
18-15
18-20
18-22
18-29
20-3
20-4
20-5
Degrees
W
X
Y
Z
70
90
70
35
90
35
35
80
35
70
90
70
35
35
70
80
90
70
90
70
45
35
145
120
110
180
145
110
180
110
110
110
145
180
170
145
110
110
120
170
120
180
145
180
145
110
110
215
240
270
215
250
270
250
250
250
215
270
265
215
250
250
240
265
240
270
215
270
215
250
250
290
290
325
325
325
280
325
290
290
325
325
290
280
290
290
325
Insert
Arrangement
20-6
20-15
20-17
20-18
20-19
20-21
20-23
20-24
20-27
20-29
22-1
22-2
22-4
22-5
22-8
22-9
22-10
22-11
22-13
22-20
22-22
22-23
22-27
22-28
24-2
24-9
24-10
24-11
X
Y
Z
80
110
250
280
16-7 20-16
18-5 20-20
18-9 20-22
18-13 22-3
18-14 22-6
20-7 22-12
20-8 22-14
20-9 22-15
20-12 22-16
20-14 22-17
A
A
W
Degrees
W
X
Y
Z
70
80
90
35
90
35
35
35
35
80
35
70
35
35
35
70
35
35
35
35
35
80
80
80
35
80
35
145
180
110
180
110
110
110
110
110
145
110
110
110
145
110
110
110
110
110
110
110
215
270
250
270
250
250
250
250
250
215
250
250
250
215
250
250
250
250
250
250
250
250
250
290
280
325
325
325
325
325
280
325
290
325
325
325
290
325
325
325
325
280
280
280
325
280
325
6
22-18
22-19
22-21
22-24
22-25
22-29
22-33
22-34
24-1
24-3
24-4
24-5
24-6
24-7
24-12
24-14
24-16
24-17
24-20
Insert
Arrangement
24-22
24-27
28-2
28-3
28-5
28-6
28-7
28-12
28-18
28-22
32-8
36-3
36-4
36-5
36-6
36-9
36-10
36-14
36-15
40-56
24-21
24-28
28-1
28-4
28-8
28-9
28-10
28-11
28-14
28-15
28-16
28-17
28-19
28-20
28-21
32-1
32-3
32-4
36-1
36-7
36-8
36-13
Degrees
W
X
Y
Z
45
80
35
70
35
70
35
90
70
70
80
70
70
35
80
80
90
60
72
110
110
145
110
145
110
180
145
145
125
145
145
120
110
125
125
180
125
144
250
250
215
250
215
250
270
215
215
235
215
215
240
250
235
235
270
245
216
280
325
290
325
290
325
290
290
280
290
290
325
280
280
305
288
I
nsert Arrangements
Insert Service Total
Contact Size
Arran- Rating Contgement
acts 0 4 8 12 16
10S-2 A
1
1
10SL-3 A
3
3
10SL-4 A
2
2
12S-3 A
2
2
12S-4 D
1
1
12-5
D
1
1
3
3
14S-1 A
14S-2 Inst
4
4
14S-4 D
1
1
14S-5 Inst
5
5
14S-6 Inst
6
6
14S-7 A
3
3
14S-9 A
2
2
14S-10 Inst
4
4
14S-12 A
3
3
14-3
A
1
1
14S-A7 A
19 19
16S-1 A
7
7
16S-3 B
1
1
16S-4 D
2
2
16S-5 A
3
3
16S-6 A
3
3
16S-8 A
5
5
16-2
E
1
1
16-7
A
3
1 2
16-9
A
4
2 2
16-10
A
3
3
16-11
A
2
2
16-12
A
1
1
16-13
A
2
2
18-1 A/Inst 10
10
18-3
D
2
2
18-4
D
4
4
18-5
D
3
2 1
18-06
6
4 2
18-6
D
1
1
18-7
B
1
1
18-8
A
8
1 7
18-9 Inst
7
2 5
18-10
A
4
4
18-11
A
5
5
18-12
A
6
6
18-13
A
4
1 3
18-14
A
2
1
1
18-15
A
4
4
18-16
C
1
1
18-17 Inst
7
2 5
18-19
A
10
10
18-20
A
5
5
18-22
D
3
3
18-24 A/Inst 10
10
18-29
A
5
5
18-30
A
5
5
18-31
A
5
5
20-2
1
1
20-3
D
3
3
20-4
D
4
4
20-6
D
3
3
20-7 D/A
8
8
Insert Service Total
Contact Size
Arran- Rating Contgement
acts 0 4 8 12 16
20-8 Inst
6
2
4
20-9 D/A
8
1 7
20-11 Inst 13
13
20-12
A
2
1
1
20-14
A
5
2 3
20-15
A
7
7
20-16
A
9
2 7
20-17
A
6
5 1
20-18
A
9
3 6
20-19
A
3
3
20-20
A
4
1
3
20-21
A
9
1 8
20-22
A
6
3
3
20-23
A
2
2
20-24
A
4
2
2
20-25 Inst 13
13
20-27
A
14
14
20-29
A
17
17
20-30 Inst 13
13
20-33
A
11
11
20-A48
A
19
22-1
D
2
2
22-2
D
3
3
22-4
A
4
2 2
22-5
D
6
2 4
22-6
D
3
2
1
22-7
E
1
1
22-8
E
2
2
22-9
E
3
3
22-10
E
4
4
22-11
B
2
2
22-12
D
5
2
3
22-13 D/A
5
4 1
22-14
A
19
19
22-15 E/A
6
5 1
22-16
A
9
3 6
22-17 D/A
9
1 8
22-18 D/A
8
8
22-19
A
14
14
22-20
A
9
9
22-21
A
3
1
2
22-22
A
4
4
22-23 D/A
8
8
22-24 D/A
6
2 4
22-27 D/A
9
1
8
22-28
A
7
7
22-34
D
5
3 2
24-2
D
7
7
24-3
D
7
2 5
24-4
1
3
24-5
A
16
16
24-6 D/A
8
8
4
2
24-06 A
6
24-7
A
16
2 14
24-9
A
2
2
24-10
A
7
7
7
Insert Service Total
Contact Size
Arran- Rating Cont0
4 8 12 16
gement
acts
24-11
24-12
A
A
9
5
24-16
24-17
24-20
24-21
24-22
24-27
24-28
28-1
28-2
28-3
28-4
28-5
28-6
28-7
28-8
28-9
28-09
28-10
28-11
28-12
28-13
28-15
28-16
28-17
28-18
28-19
28-20
28-21
28-22
28-51
32-1
32-3
D/A
D
D
D
D
E
Inst
D/A
D
E
E/D
D
D
D
E/D/A
D
A
D/A
A
A
A
A
A
B/D/A
C/D/A/Inst
B/D/A
A
A
D
D
D/A
D
7
5
11
10
4
7
24
9
14
3
9
5
3
2
12
12
9
7
22
26
26
35
20
15
12
10
14
37
6
12
5
9
D
32-5
A
32-6
32-7 INST,A
32-8
A
32B-13 D
D
32-17
A
32-22
2
23
35
30
13
4
54
36-1
36-3
36-4
36-5
36-6
36-7
36-8
36-9
36-10
36-11
36-12
36-13
36-14
36-15
36-16
36-17
38-18
36-20
36-46
36-52
40-56
40-63
22
6
3
4
6
47
47
31
48
48
48
17
16
35
47
47
31
34
27
52
85
61
D
D
D/A
A
A
A
A
A
A
A
A
E/A
D
D/A
A
A
A
A
A
A
A
A
3
2
1
3
2
2
1
4
6
3
3
3
9
9
7
24
3
6
2 12
3
2
1
2
3
2
4
2
2
3
2
1
2
7
2
2 10
6 6
5
3
4 18
26
26
35
20
15
12
4 6
10 4
37
3
12
3
2 4
2
2
3
2 16
7 28
6 24
13
4
54
3
3
4
2
4 18
3
4
1
1
7 40
1 46
2 14 14
48
48
48
2 15
5 5 6
35
7 40
7 40
2 14 14
2 2 30
27
52
85
I
nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
B A
A
16
B
C
12
8
0
4
A
B
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Front of
socket insert
10SL-3
A
3
16
C
10S-2
A
1
16
G
10SL-4
A
2
16
14S-1
C A
A
F
E
Front of
socket insert
B
C
12S-3
A
2
16
A
B
C
B
14S-1
A
3
16
B
A
14S-2
Inst.
4
16
14S-4
D
1
16
14S-7
A
3
16
B
D
C
A
B
C
14S-9
A
2
16
B
100 0 rotation
of 14S-2
100 0 rotation
of 14S-7
*14S-10
Inst.
4
16
*14S-12
A
3
16
B
A
C
16S-4
D
2
16
*14-3
A
1
8
16S-5
A
3
16
A
8
B
C
16S-1
A
7
16
G
E
C
A
D
B
*Not tooled up, can be tooled up on request. Contact Factory.
A
G
D
B
*16S-3
B
1
16
14S-6
Inst.
6
16
E
A
B
A
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
14S-5
Inst.
5
16
F
A
B
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
C
D
C
14S-A7
A
7
16
C
E
B
D
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
A
F
A
E
D
B
12-5
D
1
12
12S-4
A
1
16
16S-6
A
3
16
B
C
A
B
16S-8
A
5
16
E
*16-2
E
1
12
I
nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
A
B
A
C
D
H
A
A
F
J
C
16-9
A
2 2
12 16
16-10
A
3
12
B
D
B
C
16-11
A
2
12
B
A
C
B
*16-13
A
2
12
E
A
A
C
A
16-12
A
1
4
B
F
D
C
B
D
E
Insert arrangement
18-1
Service rating
B,C,F,G=A;Bal.=Inst.
Number of contacts
10
Contact size
16
Premating contact
F
A
E
G
D
*18-6
D
1
4
18-06
A
2 4
16 12
E
B
B
18-5
D
2 1
12 16
C
C
E
H
D
18-4
D
4
16
A
18-3
D
2
12
G
F
A
D
C
A
B
C
18-7
B
1
8
F
A
D
B
C
E
A
D
B
D
18-8
A
1 7
12 16
H
18-9
Inst.
2 5
12 16
18-10
A
4
12
D
18-11
A
5
12
E
F
A
B
B
18-12
A
6
16
C or D
A
C
B
B
E
D
B
G
D
C
D
E
A
C
C
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
A
B
B
A
I
0
4
B
16-7
A
1 2
8 16
C
G
8
B
C
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
12
16
*18-13
A
1 3
8 12
A
E
C
A
G
F
B
D
A
A
H
J
C
K
o
100 - rotation
of 18-9
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
*18-14
A
1 1
4 16
18-15
A
4
12
18-16
C
1
12
*Not tooled up, can be tooled up on request. Contact Factory.
9
*18-17
Inst.
2 5
12 16
18-19
A
10
16
K
18-20
A
5
16
D
I
nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
H
C
B
A
A
B
A
G
I
B
F
J
C
C
D
E
E
20-2
D
1
0
-
E
20-3
D
4
12
A
A
C
B
A
H
G
F
B
B
B
H
C
F
B
B
C
*18-31
A
5
16
C
A
G
H
C
A
260 rotation
of 18-20
110 rotation
of 18-20
*18-30
A
5
16
C
*18-29
A
5
16
D
A
A
0
0
-
0
-
*18-24
B,C,F,G=A;Bal.=Inst.
10
16
D
4
D
D
250 - rotation
of 18-1
18-22
D
3
16
C
8
B
A
C
D
o
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
B
A
12
C
E
E
16
G
J
C
F
C
C
E
B
D
E
A
D
D
E
F
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
20-4
D
4
12
C or D
L
B
E
M
N
20-7
A,B,H,G=D;C,D,E,F=A
8
16
A
*20-6
D
3
16
A
G
F
A
D
D
G
E
A
B
H K
20-9
H=D;Bal.=A
1 7
12 16
H
B
I
D
C
D
20-11
Inst.
13
16
A
H
G
F
D
B
C
B
F
20-18
A
3 6
12 16
D
20-19
A
3
8
C
20-20
A
1 3
4 12
A
*Not tooled up, can be tooled up on request. Contact Factory.
10
20-16
A
2 7
12 16
E
A
F
C
B
20-17
A
5 1
12 16
E or F
F
A
H
G
B
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
A
C
C
E
20-15
A
7
12
A or D
A
A
I
D
B
20-14
A
2 3
8 12
D
*20-12
A
1 1
4 16
H
C
C
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
E
G
E
B
J
20A - 9
A
9
12
F
A
F
E
A
C
20-8
Inst.
2 4
8 16
A
B
I
E
C
D
E
A
B
D
B
C
*20-21
A
1 8
12 16
1
20-22
A
3 3
8 16
20-23
A
2
8
I
nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
L
A
J
B
N G
B
D
F
A
D
K
I
M
J
F
C
0
B
N
L
C
E
F
N G
P
S
C
B
M
D
H K
E
A
D
R
J
D
4
T
K
E
G
C
A
L
L
H
8
M
B
N
H K
12
A
C
E
M
16
J
F
H
G
_
0
100 rotation
of 20-11
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
20-24
A
2 2
8 16
*20-25
Inst.
13
16
B
M
U
K
C
H
*20-30
Inst.
13
16
B
D
P
C
J
D
H
R
S
A
A
N
V
T
L
F
20-29
A
17
16
G
20-27
A
14
16
M
L M A
A
K
J
o
250 rotation
of 20-11
E
B
A
C
B
B
C
D
G F E
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
20-33
A
11
16
E
F
20 A - 48
A
19
16
22-2
D
3
8
A
*22-4
A
2 2
8 12
C
A
A
E
22-1
D
2
8
A
B
B
B
A
C
C
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
22-5
D
2 4
12 16
D
22-7
E
1
0
*22-6
D
2 1
8 16
B
A
E
B
C
22-9
E
3
12
A
*22-8
E
2
12
A
D
B
K
E
A
J
U
D
C
22-12
D
2 3
8 16
A
*Not tooled up, can be tooled up on request. Contact Factory.
11
22-13
E=D;A,B,C,D=A
4 1
12 16
E
C
R
H
D
G
22-11
B
2
16
B
P
S
B
A
N
Y
T
B
22-10
E
4
16
C
M
L
A
D
C
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
B
C
F
E
22-14
A
19
16
A
I
nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
16
12
8
A
F
H
G
B
F
C
C
C
Insert arrangement
22-15
Service rating
D=E;A,B,C,E,F=A
Number of contacts
5 1
Contact size
12 16
Premating contact
D
E
D
E
22-16
A
3 6
12 16
D
*22-17
A=D;Bal.=A
1 8
12 16
E
D
B
22-19
A
14
16
F
H
22-22
A
4
8
C or D
D
F
A
F
22-27
J=D;Bal.=A
1 8
8 16
A
B
B
G
E
E
D
22-28
A
7
12
G
C
A
C
B
G
E
B
24-4
C
C
H
J
D
A
H
F
B
K
M
L
C
G
B
E
G
F
D
D
A
D
D
C
D
E
F
22-24
C,D,E=D;A,B,F=A
2 4
12 16
D
B
C
G
22-23
H=D;Bal.=A
8
12
A or D
G
E
E
C
A
B
J
C
D
*22-21
A
1 2
0 16
22-20
A
9
16
D
F
B
E
B
B
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
D
A
F
F
H
C
C
F
A
A
A
B
E
E
C
22-18
A,B,F,G,H=D;C,D,E=A
8
16
D
G
A
C
G
D
A
J
F
D
N
D
H
G
C
M
H
B
F
F
E
D
P
0
B
L
J
H
J
J
A
K
A
G
A
G
E
B
A
H
B
4
N
A
P
E
D
C
R
S
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
*22-34
D
3 2
12 16
E
24-2
D
7
12
A
*24-3
D
2 5
12 16
D
*Not tooled up, can be tooled up on request. Contact Factory.
12
24-4
A
3 1
16 0
-
24-5
A
16
16
S
24-6
A,G,H=D;Bal.=A
8
12
D
I
nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
D
E
A
L
A
K
J
12
8
F
B
C
M
P
16
0
A
A
B
C
A
B
E
N
4
B
G
D
E
F
D
O
E
I
D
B
C
24-06
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
24-7
A
2 14
12 16
G
24-9
A
2
4
B
C
A
*24-16
A,B,F,G=D;C,D,E=A
1 3 3
8 12 16
G
24-12
A
2 3
4 12
A
A
A
F
B
G
C
B
E
E
K
F
L
B
G
M
C
H
N
E
D
H
A
24-21
D
1 9
8 16
E
K
B
Q
J
G
C
R
S
T
W X
U
V
P
Y
Z
G
F
B
M
24-28
Inst.
24
16
*24-27
E
7
16
D
*Not tooled up, can be tooled up on request. Contact Factory.
13
28-1
A,J,E=D;Bal.=A
3 6
8 12
E
F
*28-2
D
2 12
12 16
E
C
D
N
D
E
24-22
D
4
8
D
H
A
L
J
C
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
D
E
24-20
D
2 9
12 16
A
J
P
K
F
D
*24-17
D
2 3
12 16
D
B
C
J
L
F
A
H
G
C
G
D
24-11
A
3 6
8 12
E
B
H
K
E
C
E
G
B
D
A
J
C
B
F
24-10
A
7
8
D or E or G
D
A
A
E
D
I
H
G
24-06
A
2 4
16 8
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
G
C
F
H
E
I
nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
16
12
8
4
0
A
A
S
A
B
A
B
E
C
P
C
D
C
B
B
E
G
F
C
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
28-3
E
3
8
A
*28-5
D
2 1 2
4 12 16
*28-4
G,S,P=E;Bal.=D
2 7
12 16
E
J
H
H
A
A
G
M
A
B
28-6
D
3
4
A
B
F
L
C
A
K
G
B
M
B
D
L
C
F
E
C
D
28-7
D
2
4
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
G
B
V
W
X
P
R
S
L
N
A
F
B
M
C
L
H
D
X
J
C
U
N
G
C
D
E
F
b
Z
M
A
B
S
a
T
d
V
W
H
R
P
B
T
d
Y
K
A
b
Z
H
G
28-09
A
5 4
16 4
S
a
G
T M I
D
R
P
E
K
J
D
28-9
D
6 6
12 16
E
J
N
U
E
E
28-8
L,M=E;B=D;Bal.=A
2 10
12 16
D
A
F
F
E
L Y
K
X
U
H
G
o
F
100 rotation
of 28-12
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
28-10
G=D;Bal.=A
2 2 3
4 8 12
G
28-11
A
4 18
12 16
M
*Not tooled up, can be tooled up on request. Contact Factory.
14
28-12
A
26
16
H
*28-13
A
26
16
H
D
E
W
J
C
V
I
nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
A
J
H
A
B
E
D
C
L
K
M
e
f
g
M
H
C
S
H
V
N
U
R
Q
P
G
F
E
8
4
E
0
A
L
B
K
L
F
K
C
R
M
P
J
M
D
N
E
H
k
l
F
m
G
28-15
A
35
16
M
28-16
A
20
16
F
J
A
N
K
A
B
G
28-19
H,M=B;A,B=D;Bal.=A
4 6
12 16
H
D
A
F
N
V
P
W
R
X
Z
a
b
c
d
e
Y
B
f
g
l
h
m
j
k
n
p
E
28-21
A
37
16
A
A
B
J
M
U
28-20
A
10 4
12 16
E
A
H
L
T
E
K
C
G
K
S
D
H
N
F
C
L
M
G
F
H
E
P
E
M
J
J
B
C
H
C
K
28-18
M=C;G,H,J,K,L=D;A,B=ABal.=Inst.
12
16
*28-17
R=B;M,N,P=D;A to L=A
15
16
N
B
A
L
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
C D
J
12
D
h
j
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
L
T
A G
N
PX R Y S Z T a U b V c W
d
B
B
K
J
G
F
16
A
E
B
B
D E
L
D
28-22
D
3 3
4 16
C
F
M
F
C
G
D
E
D
J
C
H
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
28-51
D
12
12
32-1
A=E;B,C,D,E=A
2 3
0 12
*Not tooled up, can be tooled up on request. Contact Factory.
15
*32-3
D
1 2 2 4
0 4 12 16
32-5
D
2
0
I
nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
A
B
G
H
L
P
W
X
J
K
M
N
R
S Z
T
O
h
K
S
L
F
e
j
X
W
f
g
X
Z
T
a
U
4
0
A
G
B
M
k
Y
V
U
8
E
R
d
Y
12
J
c
F
I
P
W
D
C
E
16
H
C
N
D
I
b
V
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
O
32-7
INST , A
4 24 7
16
12
32-6
A
16 2 3 2
16 12 8 4
A
M
C
T
D
N
c
Z
V
P
a
e
K
W
b
R
e
h
i
y
AA
z
AD
1
11
13
AG
A
B
C
E
F
G
A
F
D
9
H
B
2
12
J
I
8
K
L
M
N
E
3
32B13
O
7
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
P
R
S
U
V
W
T
D
C
4
6
AC
AE
32-22
A
54
16
32-17
D
4
4
32-8
A
6 24
12 16
S
10
w
x
AF
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
r
v
AB
B
C
S
5
32B-13
D
13
8
*36-1
D
4 18
12 16
*Not tooled up, can be tooled up on request. Contact Factory.
16
f
j
n
m
o
L
X
W
a
Z
d
l
k
G
R
Y
Y
c
g
C
P
U
X
F
J
M
O
T
b
B
J
H
L
N
E
O
d
G
K
S
B
D
F
A
I
U
A
D
H
Y
36-3
D
3 3
0 12
I
nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
16
12
8
4
0
A
A
A
B
F
B
D
C
B
E
C
C
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
36-4
A=D;B,C=A
3
0
A
C
K
O
P
R
V
a
h
Y
d
Z
e
n
N
S
T
b
f
c
g
k
vv
w
W
x
A
H
O
V
J
P
W
d
K
Q
X
e
l
Y
m
t
L
R
f
N
a
p
H
U
b
j
r
w
C
T
h
v
y
M
Z
n
G
S
g
u
A
F
O
c
V
k
J
P
W
d
s
Q
B
e
f
e
t
u
T
h
j
c
k
s
G
N
x
V
D
J
P
W
d
Q
X
t
R
f
m
S
g
u
N
T
a
h
p
v
y
G
M
Z
n
o
F
L
Y
e
l
B
E
K
z
100 rotation
of 36-10
*36-11
A
48
16
A
17
O
U
b
r
w
H
N
a
p
v
y
36-10
A
48
16
A
*Not tooled up, can be tooled up on request. Contact Factory.
S
g
C
G
M
Z
C
F
L
T
A
L
n
z
R
X
c
*36-9
A
1 2 14 14
4 8 12 16
P
F
R
f
m
K
W
b
t
B
Y
o
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
r
p
E
K
X
l
x
D
H
e
*36-8
A
1 46
12 16
Y
B
E
A
P
w
z
y
E
J
V
j
u
v
*36-7
A
7 40
12 16
x or y
D
k
n
s
D
I
O
Y
a
d
h
M
U
a
d
L
R
V
Z
m
y
C
M
Y
g
z
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
K
P
U
c
f
s
y
S
Z
H
X
b
m
p
r
J
O
T
N
S
X
l
u
I
36-6
A
2 4
0 4
C
E
F
G
W
j
A
B
D
E
G
J
M
I
U
36-5
A
4
0
B
D
F
H
L
D
j
r
w
U
b
k
s
x
z
250 rotation
of 36-10
*36-12
A
48
16
A
c
I
nsert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND
16
12
8
4
0
A
J
P
S
R
B
N
K
L
P
P
M
K
R
S
H
B
E
W
g
Y
X
F
G
K
J
E
D
V
f
h
Z
G
E
F
e
m
L
D
G
D
M
C
Q
H
a
M
N
J
C
U
j
b
N
L
T
d
k
c
C
Q
A
A
B
Q
I
H
F
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
A
D
C
F
H
L
P
K
O
U
Y
d
h
Z
e
B
E
I
R
V W
l
U
Y
d
c
g
k
w
u
F
H
L
P
X
v
h
m
Z
e
S
E
R
V W
G
J
M
S
N
T
b
f
a
l
w
g
V
M
v
I
O
J
B
f
b
W
c
X
K
R
T
A
C
H
P
R
X
d
D
J
100orotation
of 36-9
*36-16
A
7 40
12 16
x or y
*36-17
A
7 40
12 16
x or y
*36-18
A
1 2 14 16
4 8 12 16
Y
A
F
L
T
Z
U
a
N
V
b
j
k
m
J
W
R
P
B
G
H
N
A
E
L
M
L
E
F
T
K
a
g
W
U
V
T
B
F
M
U
C
H
N
V
D
J
P
W
A
X
Y
S
b
j
c
k
d
m
f
n
g
p
h
i
Z
d
s
X
Y
c
t
u
v
w
j
t
u
v
AD
AE
z
AA AB AC
AD AE AF AH
b
d
c
W
f
p
n
m
M
V
U
g
r
p
AF
w
x
y
z
AH
AJ
AK
AL
AA
Z
s
AB
AM
AN
x
AP
y
b
a
k
L
K
T
h
r
AC
a
i
J
S
Z
D
C
H
R
Y
X
Z
q
P
N
S
B
F
E
K
R
W
c
f
h
C
D
G
M
e
AR
AZ
AS
BA
BJ
AT
BB
BK
X
AU
BC
LB
BS
AV
BT
AW
BD
BM
BE
BN
BU
AX
BF
BP
BV
AY
BH
BR
Y
40 - 56
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
G
N
250 rotation
of 36-7
B
E
K
S
o
L
F
100 rotation
of 36-7
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
*36-20
A
2 2 30
8 12 16
k
36-46
A
27
16
*Not tooled up, can be tooled up on request. Contact Factory.
36-52
A
52
16
18
A
H
p
z
o
D
E
e
s
z
U
a
Y
m
y
y
Z
P
c
k
u
d
X
r
y
y
B
I
j
n
p
s
r
A
D
C
K
O
N
T
b
f
a
j
n
G
J
M
S
*36-15
M=D;Bal=A
35
16
J
*36-14
D
5 5 6
8 12 16
*36-13
N,P,Q=E;Bal.=A
2 15
12 16
40-56
A
85
16
40-63
A
61
16
C
MIL -C-5015
MS Threaded Version
connector
S
hell style
Wall mounting receptacle
MS-3100
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 AND 36
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
4.55 DIA. FOR 40 SIZE
MS-4100
M
K
V
S
R
S
PANEL OPENING
R
A
All dimensions are in mm
Connector
Size
A
Thread
in inches
K
M
O
R
S
V
Thread
in inches
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2.00-18 UNS
2 1/4-16 UN
2 1/2-16 UN
1.98
1.98
1.98
1.98
1.98
1.98
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.45
14.29
14.29
19.05
14.29
19.05
14.29
19.05
19.05
19.05
19.05
20.64
20.64
22.25
22.22
22.22
20.62
20.62
20.62
23.82
23.82
26.97
26.97
30.17
33.32
36.52
39.67
46.02
53.0
58.72
62.00
18.25
20.64
20.64
23.02
23.02
24.61
24.61
26.99
29.37
31.75
34.92
39.69
44.45
49.21
55.58
25.68
27.76
27.76
30.43
30.43
32.82
32.82
35.07
38.38
41.55
44.70
51.08
57.15
63.78
69.85
5/8-24 NEF
11/16-24NEF
11/16-24NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-16 UN
Cable Connecting Receptacle
MS-3101
MS-4101
V
A
All dimensions are in mm
Connector
Size
A
Thread
in inches
V
Thread
in inches
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4-16 UN
2 1/2-16 UN
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-16 UN
19
S
hell style
Box mounting receptacle
MS-3102
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 AND 36
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
4.55 FOR 40 SIZE
MS-4102
L
S
N
R
S
M
K
R
A
All dimensions are in mm
Connector
Size
A
Thread
in inches
K
L
M
N
R
S
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4-16 UN
2 1/2-16 UN
1.98
1.98
1.98
1.98
1.98
1.98
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.45
30.18
30.18
41.28
30.18
41.28
30.18
41.28
49.28
49.28
49.28
49.28
49.28
49.28
49.28
49.28
13.89
14.28
19.05
14.28
19.05
14.28
19.05
19.05
19.05
19.05
20.64
20.64
22.22
22.22
22.22
15.87
17.46
17.46
19.05
19.05
22.22
22.22
25.40
28.57
31.75
34.92
41.27
48.26
53.97
58.25
18.25
20.64
20.64
23.02
23.02
24.61
24.61
26.99
29.37
31.75
34.92
39.69
44.45
49.21
55.58
25.68
28.04
28.04
30.43
30.43
32.82
32.82
35.08
38.38
41.55
44.73
51.08
57.15
63.78
69.85
Straight Plug
MS-3106
Q
MS-4106
V
A
All dimensions are in mm
Connector
Size
A
Thread
in inches
Q
max
V
Thread
in inches
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4-16 UN
2 1/2-16 UN
19.05
19.84
19.84
22.22
22.22
25.40
25.40
28.57
31.75
34.92
38.10
44.45
51.75
57.15
63.50
5/8-24 NEF
11/16-24NEF
11/16-24NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-20 UN
Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory.
20
S
hell style
Q max
Right angle plug
MS-3108
MS-4108
A THREAD
V
All dimensions are in mm
Connector
Size
A
Thread
in inches
Q
max
V
Thread
in inches
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4-16 NS
19.05
19.84
19.84
22.22
22.22
25.40
25.40
28.57
31.75
34.92
38.10
44.45
51.75
57.15
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 29/32-18 NS
2 1/16-20 UNS
40
2 1/2-16 UN
63.50
2 5/16-16 UN
Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory.
Other Accessories
Dummy receptacle
A
B
MS-3105
OC
E
OG
F MAX
D
All dimensions are in mm
Part number
(see note)
A
B
C
3.05
D
Thread
in inches
5/8-24
MS-3105-10S
25.4
18.26
MS-3105-12S
27.79
E
F
G
14.27
3.96
8.20
20.62
3.05
3/4-20
14.27
3.96
11.43
max.
MS-3105-12
27.79
20.62
3.05
3/4-20
19.05
3.96
11.43
MS-3105-14S
30.17
23.01
3.05
7/8-20
14.27
3.96
13.36
MS-3105-14
30.17
23.01
3.05
7/8-20
19.05
3.96
13.36
MS-3105-16S
32.54
24.61
3.05
1-20
14.27
3.96
16.41
MS-3105-16
32.54
24.61
3.05
1-20
19.05
3.96
16.41
MS-3105-18
34.92
26.97
3.05
1 1/8-18
19.05
5.16
18.03
MS-3105-20
38.10
29.36
3.05
1 1/4-18
19.05
5.16
23.54
MS-3105-22
41.27
31.75
3.05
1 3/8-18
19.05
5.16
25.93
MS-3105-24
44.45
34.92
3.73
1 1/2-18
20.62
5.16
29.21
MS-3105-28
50.8
39.67
3.73
1 3/4-18
20.62
5.16
34.67
MS-3105-36
63.5
49.22
4.39
2 1/4-16
22.2
9.11
46.56
Note:
The dash number also indicates shell size.
21
P
rotective Cap For MS Series
MS-25043
For receptacles Has internal threads and is used on all receptacles. Gasket is provided in the dust cap forming a watertight seal.
D
C MAX
A
B MAX
E
All dimensions are in mm
MS Part number
Shell size
A Thread in inches
B
C
D
E
MS 25043-10D
MS 25043-12D
MS 25043-14D
MS 25043-16D
MS 25043-18D
MS 25043-20D
MS 25043-22D
MS 25043-24D
MS 25043-28D
MS 25043-32D
MS 25043-36D
MS 25043-40D
MS 10S-1-SL
MS 12-12S
MS 14-14S
MS 16-16S
MS 18
MS 20
MS 22
MS 24
MS 28
MS 32
MS 36
MS 40
5/8-24
3/4- 20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 1/2-18
1 3/4-18
2-18
2 1/4-18
2 1/2-16
11.11
11.11
11.11
11.11
11.11
11.11
11.11
11.11
12.7
12.7
12.7
12.7
20.7
25.4
28.6
30.2
34.1
37.3
40.4
43.6
50
56.3
62.7
69
3.6
3.6
3.6
3.6
3.6
4.4
4.4
4.4
4.4
4.8
4.8
4.8
102
115
115
115
115
127
127
140
197
197
197
197
Notes :
1.
2.
3.
4.
For protective caps with nylon cord, contact factory.
Standard - Plating is Cad. For alternative finishes, contact factory.
Standard - straight knurling. For diamond knurling on caps, contact factory.
Please add 07 suffix for bigger end link.
Other Accessories
Protective cap for MS series
MS-25042
For plugs
Has external threads and is used on all plugs where a coupling ring is provided.
A
D
C MAX
B MAX
E
All dimensions are in mm
MS Part number
Shell size
A Thread in inches
B
C
D
E
MS 25042-10D
MS 25042-12D
MS 25042-14D
MS 25042-16D
MS 25042-18D
MS 25042-20D
MS 25042-22D
MS 25042-24D
MS 25042-28D
MS 25042-32D
MS 25042-36D
MS 25042-40D
MS 10S-1-SL
MS 12-12S
MS 14-14S
MS 16-16S
MS 18
MS 20
MS 22
MS 24
MS 28
MS 32
MS 36
MS 40
5/8-24
3/4- 20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 1/2-18
1 3/4-18
2-18
2 1/4-18
2 1/2-16
16.67
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
17.4
20.6
23.7
26.9
30
33
36.4
39.6
46
52
58.7
65
4
4
4
4
4
4.8
4.8
4.8
4.8
5.6
5.6
5.6
102
115
115
115
115
127
127
140
197
197
197
197
22
MIL -C-5015
97B Series Bayonet Version
connector
S
hell style
Wall mounting receptacle
100
V
T THD
K
M
R
S
L
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
'R'
‘S’
+0.20
‘L’
MAX
PG
THD
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.00
50.80
57.00
63.50
27.60
27.60
27.60
27.60
33.80
33.80
33.80
33.80
35.70
35.70
37.30
37.30
5/8”-24 UNEF
5/8”-24 UNEF
3/4”-24 UNEF
7/8”-24 UNEF
7/8”-24 UNEF
1”-20 UNEF
1 1/8”-18 UNEF
1 1/8”-18 UNEF
1 3/8”-18 UNEF
1 5/8”-18 UNEF
1 7/8”-16 UN
2 1/16”-16 UN
Cable connecting receptacle
101
T THD
AT
0/ S
0/ A
45 0
A/
-L
O
K
M
L
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
‘Q’
+0.20
‘S’
+0.20
‘L’
MAX
T
-2A THD
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.70
41.30
47.60
54.00
60.60
25.00
27.60
29.60
32.10
32.10
34.60
37.60
40.90
44.40
50.70
56.90
63.40
27.60
27.60
27.60
27.60
33.80
33.80
33.80
33.80
35.70
35.70
37.30
37.30
5/8”-24 UNEF
5/8”-24 UNEF
3/4”-24 UNEF
7/8”-24 UNEF
7/8”-24 UNEF
1”-20 UNEF
1 1/8”-18 UNEF
1 1/4”-18 UNEF
1 3/8”-18 UNEF
1 5/8”-18 UNEF
1 7/8”-16 UN
2 1/16”-16 UN
Box mounting receptacle
0/ V
102
R
S
M
K
L
23
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
'R'
'S'
+0.20
-
'L'
MAX.
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
24.70
27.60
24.70
24.70
33.80
33.80
33.80
33.80
35.70
35.70
37.30
37.30
Rear mounting Receptacle
0/ A
103
M
R
S
K
L
SHELL
SIZE
'A'
+0.0
-0.15
'M'
'K'
+0.41
+-0.20
-0.0
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
'R'
+0.20
-
'S'
+0.20
-
'L'
MAX.
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
27.60
27.60
27.60
27.60
33.80
33.80
33.80
33.80
35.70
35.70
37.30
37.30
Plug connector
106
T THD
‘L’
‘A’
AFTER KNURLING
SHELL
SIZE
'A'
MAX.
'L'
MAX
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
56.00
56.00
54.00
56.00
67.00
74.00
75.00
78.00
78.00
82.00
82.00
90.00
'T'
- 2A THD
5/8”-24 UNEF
5/8”-24 UNEF
3/4”-24 UNEF
7/8”-24 UNEF
7/8”-24 UNEF
1”-20 UNEF
1 1/8”-18 UNEF
1 1/4”-18 UNEF
1 3/8”-18 UNEF
1 5/8”-18 UNEF
1 7/8”-18 UN
2 1/16”-16 UN
Jam Nut Receptacles
107
C
H
0/ B
D
A
F
L
E
D
SHELL
SIZE
A
-2A THREADS
B
+0.0
-0.15
C
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20 UNEF
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
24
WALL THICKNESS
MIN
MAX
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
F
+-0.25
H
L
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
27.70
30.00
30.00
35.30
37.70
37.70
37.70
37.70
35.20
35.20
35.20
S
hell style
Box mount Receptacle with PC Tail contacts
L
9.00
o
A
7.00
o1.5 for size 12
o 0.76 for size 16
R
M
K
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
‘R’
‘S’
+0.20
‘L’
+0.20
-
10SL
12S
14S
16S
6
18
20
22
24
28
32
36
40
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
65.51
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
55.50
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
69.90
24.70
24.70
24.70
24.70
33.80
33.80
33.80
33.80
33.80
33.80
33.80
33.80
33.80
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
‘R’
‘S’
+0.20
‘L’
+0.20
-
10SL
12S
14S
16S
6
18
20
22
24
28
32
36
40
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
65.51
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
55.50
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
69.90
24.70
24.70
24.70
24.70
33.80
33.80
33.80
33.80
33.80
33.80
33.80
33.80
33.80
S
Rear Mount Receptacle with PC Tail contacts
L
9.00
o
A
7.00
o 1.5 for size 12
o 0.76 for size 16
M
R
K
S
L2
D
6.00 max
1.50 (#12)
L3
C
0.76 (#16)
Jam Nut receptacles with PC Tail contacts
L4
B
H
G
F
E
A
7.00
L1
Shell
Size
‘A’
-2A Threads
10SL
14S
16S
16
18
20
22
24
28
32
36
40
7/8”-2OUNEF
1” 1/8-18UNEF
1” 1/4-18UNEF
1” 1/4-18UNEF
1” 3/8-18UNEF
1” 1/2-18UNEF
1” 5/8-18UNEF
1” 3/4-18UNS
2”-18UNS
2” 1/4-16UN
2” 1/2-16UN
2” 3/4-16 UN
‘B’
+0.00 - 0.15
18.20
24.60
27.40
27.40
30.80
34.20
37.40
40.90
46.70
53.40
59.60
65.50
Panel Cut Out
9.00
‘C’
‘D’
‘E’
F
5.00
6.00
6.00
6.00
7.00
7.00
7.00
7.00
7.00
7.00
8.00
8.00
2.50
2.50
2.50
2.50
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
31.80
38.10
41.20
41.20
45.00
49.20
52.40
55.20
62.20
68.20
75.20
82.20
35.00
41.30
44.40
44.40
48.20
52.40
55.50
59.00
66.00
72.00
80.00
87.00
25
G
31.50
37.90
41.00
41.00
44.80
49.00
52.20
55.00
62.00
68.00
75.00
82.00
H
22.70
28.80
32.00
32.00
35.10
38.20
42.00
44.70
51.10
57.40
63.80
70.20
L1
29.20
29.20
29.20
37.70
40.00
40.00
40.00
40.00
40.00
40.00
40.00
40.00
L2
13.50
13.50
13.50
13.50
15.00
15.00
15.00
15.00
15.00
15.00
15.00
15.00
L3
12.50
12.50
12.50
21.00
21.00
21.00
21.00
21.00
21.00
21.00
21.00
21.00
L4
20.90
27.20
30.40
30.40
33.60
36.80
39.90
43.10
49.20
55.70
62.00
68.50
S
hell style
Wall Mount Receptacle with A type Solid B/S
A
TTHD
100A
M
R
S
K
L
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
‘R’
‘S’
+0.20
‘L’
MAX
‘T’
THD
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
45.00
45.00
48.00
48.00
55.00
60.00
65.00
65.00
68.00
68.00
70.00
70.00
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
Wall Mount Receptacle with A type solid B/S & Environmental sealing Grommet
100AG
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
‘R’
‘S’
+0.20
‘L’
MAX
‘T’
THD
10SL
12S
14S
16S
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
68.60
68.60
68.60
68.60
75.00
75.00
75.00
75.00
77.00
77.00
80.00
80.00
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
Wall Mount Receptacle with F type Strain Relief B/S & Environmental sealing Grommet
A
100F
M
R
S
K
L
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
'R'
'S'
+-0.20
'L'
MAX.
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
60.00
60.00
61.00
61.00
68.00
72.00
74.00
74.00
78.00
78.00
82.00
82.00
Wall Mount Receptacle with R type B/S & Environmental sealing Grommet
A
100R
R
S
K
M
L
26
SHELL
SIZE
'A'
+0.0
-0.15
'K'
+-0.20
'M'
+0.41
-0.0
'R'
'S'
+-0.20
'L'
MAX.
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
47.00
47.00
47.00
48.00
54.40
56.40
56.40
56.40
57.40
57.40
58.10
58.10
S
hell style
Wall Mount Receptacle with G type B/S for heatshrinkable & Environmental sealing Grommet
A
100G
M
R
K
L
S
SHELL
SIZE
'A'
+0.0
-0.15
'K'
+-0.20
'M'
+0.41
-0.0
'R'
'S'
+-0.20
'L'
MAX.
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
52.50
52.50
54.40
54.40
61.00
62.00
62.00
65.00
65.00
66.00
71.00
75.00
Wall Mount Receptacle with PG threaded type B/S suitable for PG Glands
A
PG THD
100PG
R
S
M
K
L
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
'R'
‘S’
+0.20
‘L’
MAX
PG
THD
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
56.00
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
7, 9, 11
7, 9, 11
11, 13.5
9, 11, 16
9, 11, 16
9, 11, 16, 21
11, 16, 21
13.5, 16, 21
13.5, 16, 21, 29
16, 21, 29
21, 29
21, 29, 36
Wall Mount Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded cable
with sealing rubber bush
A
100EGM/PHM
R
S
M
K
L
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
'R'
'S'
+-0.20
'L'
MAX.
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
95.60
95.60
95.60
95.60
102.00
102.00
102.00
102.00
104.00
104.00
106.00
106.00
'R'
'S'
+-0.20
'L'
MAX.
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
57.00
57.00
59.00
59.00
66.00
66.00
66.00
66.00
68.00
68.00
70.00
70.00
Wall Mount Receptacle with SQ type Shielded B/S & Environmental sealing Grommet
& Heat shrinkable option
A
100SQ
R
S
M
K
L
27
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
S
hell style
Wall Mount Receptacle with Metric threaded type B/S suitable for Metric Glands
100M
Shell
Size
A
M Thread
10SL
14s
16s
6
18
20
22
24
28
32
36
M
R
S
K
L
‘M’
‘A’
‘K’
+0.0 -0.15 +0.20 +0.41 - 0.0
'R'
‘S’
+0.20
'L'
MAX.
M
THD
2.79
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
M12X1.5
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
18.21
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
Wall Mount Receptacle with 900 B/S & Environmental sealing Grommet
P
A
100RT
M
R
S
K
L
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
'R'
'S'
+-0.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'L'
'P'
MAX. MAX.
40.50
40.50
42.00
45.00
52.00
53.00
58.00
58.00
63.00
63.00
69.00
72.30
21.50
21.50
23.00
24.60
24.60
27.00
29.00
31.00
34.00
36.00
44.00
46.00
Cable connecting Receptacle with A type Solid B/S
A/ Q
FL
AT
.
A
T THD
45
S
101A
M
K
L
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
‘Q’
‘S’
+0.20
‘L’
MAX
‘T’
THD
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
25.00
27.60
29.60
32.10
32.10
34.60
37.60
40.90
44.40
50.70
56.90
63.40
45.00
45.00
48.00
48.00
55.00
60.00
65.00
65.00
68.00
68.00
70.00
70.00
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
Cable connecting Receptacle with F type Strain Relief B/S & Environmental sealing Grommet
'A'
SHELL
+0.0
SIZE
-0.15
45
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
A/
FL
Q
AT
.
A
S
101F
M
K
L
28
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'K'
+-0.20
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
'M'
+0.41
-0.0
'Q'
+-0.20
'S'
+-0.20
'L'
MAX.
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
25.0
27.60
29.60
32.10
32.10
34.60
37.60
40.90
44.40
50.70
56.90
63.40
60.00
60.00
61.00
61.00
68.00
72.00
74.00
74.00
78.00
78.00
82.00
82.00
S
hell style
Cable connecting Receptacle with R type B/S & Environmental sealing Grommet
101R
A/ Q
FL
AT
.
S
A
45
M
K
L
SHELL
SIZE
'A'
+0.0
-0.15
'K'
+-0.20
'M'
+0.41
-0.0
‘Q'
+0.20
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.00
60.00
'S'
+-0.20
'L'
MAX.
25.00
27.60
29.60
32.10
32.10
34.60
37.60
40.90
44.40
50.70
56.90
63.40
47.00
47.00
47.00
48.00
54.40
56.40
56.40
56.40
57.40
57.40
58.10
58.10
Cable connecting Receptacle with G type B/S for heatshrinkable & Environmental sealing Grommet
101G
A/
FL
Q
AT
.
A
S
45 0
M
K
L
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
'Q'
+-0.20
'S'
+-0.20
'L'
MAX.
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
52.50
52.50
54.40
54.40
61.00
62.00
63.00
65.00
65.00
66.00
71.00
75.00
Cable connecting Receptacle with A type Solid B/S & Environmental sealing Grommet
Q
FL
AT
.
A
T THD
45 0
S
101AG
A/
M
K
L
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
'Q'
+-0.20
‘S’
+0.20
‘L’
MAX
‘T’
THD
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
68.60
68.60
68.60
68.60
75.00
75.00
75.00
75.00
77.00
77.00
80.00
80.00
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
Cable connecting Receptacle with PG threaded type B/S suitable for PG Glands
101PG
A/
PG THD
FL
Q
AT
.
A
S
45 0
K
M
L
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
'Q'
+-0.20
‘S’
+0.20
‘L’
MAX
PG
THD
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
56.00
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
7, 9, 11
7, 9, 11
11, 13.5
9, 11, 16
9, 11, 16
9, 11, 16, 21
11, 16, 21
13.5, 16, 21
13.5, 16, 21, 29
16, 21, 29
21, 29
21, 29, 36
29
S
hell style
Cable connecting Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded
cable with sealing rubber bush
101EGM/PHM
A/ Q
FL
AT
.
A
S
45
M
K
L
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
'Q'
+-0.20
'S'
+-0.20
'L'
MAX.
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
95.60
95.60
95.60
95.60
102.00
102.00
102.00
102.00
104.00
104.00
106.00
106.00
Cable connecting Receptacle with SQ type Shielded B/S & Environmental sealing Grommet &
Heat Shrinkable option
101SQ
A/
FL
Q
AT
.
S
A
45
K
M
L
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
'Q'
+-0.20
'S'
+-0.20
'L'
MAX.
20.60
23.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
57.00
57.00
59.00
59.00
66.00
66.00
66.00
66.00
68.00
68.00
70.00
70.00
Cable connecting Receptacle with Metric threaded type B/S suitable for Metric Glands
101M
Shell
Size
A/ Q
FL
AT
.
M THD
A
S
45
M
K
10SL
14s
16s
6
18
20
22
24
28
32
36
‘M’
'Q'
‘A’
‘K’
‘S’
+0.0 -0.15 +0.20 +0.41 - 0.0 +-0.20 +0.20
18.21
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
20.60
25.40
28.60
28.60
31.70
34.90
31.80
41.30
47.60
54.0
60.60
25.40
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'L'
MAX.
M
THD
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
M12X1.5
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
L
Rear wall Mount Receptacle with A type Solid B/S
A
T THD
103A
R
S
M
K
L
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
‘R’
+0.10
‘S’
+0.20
‘T’
THD
‘L’
MAX
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
45.00
45.00
48.00
48.00
55.00
60.00
65.00
65.00
68.00
68.00
70.00
70.00
30
S
hell style
Rear wall Mount Receptacle with F type Strain Relief B/S & Environmental sealing Grommet
A
103F
M
R
S
K
L
SHELL
SIZE
'A'
+0.0
-0.15
'K'
+-0.20
'M'
+0.41
-0.0
'R'
+-0.10
'S'
+-0.20
'T'
THD.
'L'
MAX
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
5/8-24 UNEF
5/8 24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
60.00
60.00
61.00
61.00
68.00
72.00
74.00
74.00
78.00
78.00
82.00
82.00
Rear wall Mount Receptacle with R type B/S & Environmental sealing Grommet
A
103R
M
R
S
K
L
SHELL
SIZE
'A'
+0.0
-0.15
'K'
+-0.20
'M'
+0.41
-0.0
'R'
'S'
+-0.20
'L'
MAX.
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
47.00
47.00
47.00
48.00
54.40
56.40
56.40
56.40
57.40
57.40
58.10
58.10
Rear wall Mount Receptacle with G type B/S for heatshrinkable & Environmental sealing Grommet
A
103G
M
R
S
K
L
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
'R'
'S'
+-0.10 +-0.20
'L'
MAX.
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
52.50
52.50
54.40
54.40
61.00
62.00
63.00
65.00
65.00
66.00
71.00
75.00
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
Rear wall Mount Receptacle with A type Solid B/S & Environmental sealing Grommet
A
T THD
103AG
R
S
M
K
L
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
‘M’
+0.41 - 0.0
‘R’
+0.10
‘S’
+0.20
‘T’
THD
‘L’
MAX
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
68.60
68.60
68.60
68.60
75.00
75.00
75.00
75.00
77.00
77.00
80.00
80.00
31
S
hell style
Rear wall Mount Receptacle with PG threaded type B/S suitable for PG Glands
A
PG THD
103PG
M
R
S
K
L
Shell
Size
‘A’
+0.0 -0.15
‘K’
+0.20
'M'
+0.41 -0.0
'R'
+-0.10
‘S’
+0.20
‘L’
MAX
PG
THD
10SL
12s
14s
16s
6
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
56.00
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
7, 9, 11
7, 9, 11
11, 13.5
9, 11, 16
9, 11, 16
9, 11, 16, 21
11, 16, 21
13.5, 16, 21
13.5, 16, 21, 29
16, 21, 29
21, 29
21, 29, 36
Rear wall Mount Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded cable
with sealing rubber bush
A
103 EGM/PHM
R
S
M
K
L
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
'R'
'S'
+-0.20
'L'
MAX.
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
95.60
95.60
95.60
95.60
102.00
102.00
102.00
102.00
104.00
104.00
106.00
106.00
Rear wall Mount Receptacle with SQ type Shielded B/S & Environmental sealing Grommet
& Heat Shrinkable Option
'A'
'M'
SHELL
SIZE
103SQ
A
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
R
S
M
K
L
'K'
+0.41
+-0.20
-0.0
+0.0
-0.15
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
'R'
+-0.10
'S'
+-0.20
'L'
MAX.
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
57.00
57.00
59.00
59.00
66.00
66.00
66.00
66.00
68.00
68.00
70.00
70.00
Rear wall Mount Receptacle with Metric threaded type B/S suitable for Metric Glands
103M
Shell
Size
M THD
A
R
S
10SL
14s
16s
6
18
20
22
24
28
32
36
M
K
L
32
‘M’
‘A’
‘K’
+0.0 -0.15 +0.20 +0.41 - 0.0
'R'
‘S’
+0.20
'L'
MAX.
M
THD
2.79
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
18.20
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
M12X1.5
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
18.21
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
18.20
18.20
18.20
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
S
hell style
Rear wall Mount Receptacle with 900 B/S & Environmental sealing Grommet
P
A
103RT
R
S
K
M
L
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
'R'
'S'
+-0.20
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
'L'
'P'
MAX. MAX.
40.50
40.50
42.00
45.00
52.00
53.00
58.00
58.00
63.00
63.00
69.00
72.30
Straight Plug with A type solid B/S
TTHD
106A
‘A’
AFTER KNURLING.
L
SHELL
SIZE
'A'
MAX.
'L'
MAX.
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.39
46.10
46.60
53.40
60.10
36.30
44.00
44.00
46.00
46.00
46.00
55.00
62.00
65.00
65.00
68.00
70.00
70.00
'T'
THD
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
Rear wall Mount Receptacle with SQ type Shielded B/S & Environmental sealing Grommet
106F
‘A’
AFTER KNURLING.
L
SHELL
SIZE
'A'
MAX.
'L'
MAX
'T'
THD.
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
60.00
60.00
60.00
60.00
68.00
72.00
74.00
74.00
78.00
78.00
82.00
82.00
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
Straight Plug with R type B/S & Environmental sealing Grommet
SHELL 'A'
SIZE MAX.
106R
‘A’
AFTER KNURLING
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
L
33
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
36.30
'L'
MAX.
47.00
47.00
47.00
47.00
55.40
57.40
57.40
57.40
57.40
57.40
58.10
58.10
21.50
21.50
23.00
24.60
24.60
27.00
29.00
31.00
34.00
36.00
44.00
46.00
LS
hell
styleQualified Part Numbers
ist Of
Straight Plug with G type B/S for Heat Shrinkable & Environmental sealing Grommet
SHELL
SIZE
106G
‘A’
AFTER KNURLING
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
L
'A'
MAX
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
'L'
MAX
53.00
53.00
53.00
53.00
61.00
62.00
63.00
65.00
65.00
68.00
71.00
75.00
Straight Plug with A type Solid B/S & Environmental sealing Grommet
T THD
106AG
‘A’
AFTER KNURLING
L
SHELL
SIZE
'A'
MAX.
'L'
MAX.
‘T’
THD
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
68.60
68.60
67.00
67.00
76.00
76.00
76.00
76.00
78.00
78.00
80.00
80.00
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18UNEF
1 3/16-18UNEF
1 7/16-18UNEF
1 7/16-18UNEF
1 3/4-18UNS
2-18 UNS
SHELL
SIZE
'A'
MAX.
‘L’
MAX
PG
THD
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
56.00
56.00
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
7, 9, 11
7, 9, 11
11, 13.5
9, 11, 16
9, 11, 16
9, 11, 16, 21
11, 16, 21
13.5, 16, 21
13.5, 16, 21, 29
16, 21, 29
21, 29
21, 29, 36
Straight Plug with PG threaded type B/S suitable for PG Glands
PG THD
106PG
‘A’
AFTER KNURLING
L
SHELL
SIZE
106 EGM/PHM
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
‘A’
AFTER KNURLING
34
'A'
MAX
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
'L'
MAX
53.00
53.00
53.00
53.00
61.00
62.00
63.00
65.00
65.00
68.00
71.00
75.00
S
hell style
Straight Plug with SQ type Shielded B/S & Environmental sealing Grommet & Heat Shrinkable
option
SHELL
'A'
SIZE MAX.
106SQ
‘A’
AFTER KNURLING
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
L
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
'L'
MAX.
56.60
56.60
57.00
57.00
66.00
66.00
66.00
66.00
68.00
66.00
70.00
70.00
Straight Plug with Metric threaded type B/S suitable for Metric Glands
Shell
Size
106M
'A'
MAX.
'L'
MAX.
M
THD
M THD
10SL 22.80 56.00 M12X1.5
‘A’
AFTER KNURLING
L
14s
16s
6
18
20
22
24
28
32
36
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
56.00
58.00
66.00
74.00
74.00
77.00
77.00
78.00
78.00
90.00
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
Jam Nut Receptacle with A type Solid B/S
107TA
C
A
-2A THREADS
B
+0.0
-0.15
C
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20 UNEF
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
E
H
B
T THD
D
A
L
F
D
SHELL
SIZE
WALL THICKNESS
MIN
MAX
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
E
F
+-0.25
H
L
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
52.00
58.00
58.00
68.00
76.00
80.00
80.00
82.00
84.00
85.00
85.00
Jam Nut Receptacle with F type Strain Relief B/S with Environmental sealing Grommet
107TF
C
H
E
B
D
F
A
L
D
SHELL
SIZE
A
-2A THREADS
B
+0.0
-0.15
C
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20 UNEF
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
35
WALL THICKNESS
MIN
MAX
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
F
+-0.25
H
L
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
69.00
72.00
72.00
83.00
87.00
89.00
89.00
92.00
95.00
97.00
97.00
S
hell style
Jam Nut Receptacle with R type B/S with Environmental sealing Grommet
107TR
C
E
H
A
-2A THREADS
B
+0.0
-0.15
C
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20 UNEF
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
B
D
A
L
F
D
SHELL
SIZE
E
F
+-0.25
H
L
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
56.00
59.00
70.00
72.00
72.00
72.00
72.00
72.00
74.00
74.00
74.00
WALL THICKNESS
MIN
MAX
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
Jam Nut Receptacle with G type B/S for Heat shrinkable & Environmental sealing Grommet
107G H
C
E
0/B
D
A
L
F
Shell
Size
‘A’
-2A Threads
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8”-2OUNEF
1” 1/8-18UNEF
1” 1/4-18UNEF
1” 1/4-18UNEF
1” 3/8-18UNEF
1” 1/2-18UNEF
1” 5/8-18UNEF
1” 3/4-18UNS
2”-18UNS
2” 1/4-16UN
2” 1/2-16UN
18.20
24.60
27.40
27.40
30.80
34.20
37.40
40.90
46.70
53.40
59.60
D
Wall Thickness
MIN.
MAX.
‘C’
‘B’
+0.00 - 0.15
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
F
+0.25
H
L
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
61.00
66.00
66.00
76.00
78.00
79.00
81.00
79.00
82.00
85.00
90.00
Jam Nut Receptacle with AG type B/S for heat shrinkable & Environmental sealing Grommet
107AG
C
E
H
A
-2A THREADS
B
+0.0
-0.15
C
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20 UNEF
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
B
T THD
D
A
L
F
D
SHELL
SIZE
E
F
+-0.25
H
L
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
77.00
80.00
80.00
90.00
92.00
92.00
92.00
92.00
94.00
94.00
94.00
WALL THICKNESS
MIN
MAX
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
Jam Nut Receptacle with PG threaded type B/S suitable for PG Glands
107TPG
C
E
H
B
PG THD
D
A
F
L
SHELL
SIZE
A
-2A THREADS
B
+0.0
-0.15
C
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20 UNEF
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
36
D
WALL
THICKNESS
MIN MAX
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
F
+-0.25
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
H
L
27.00 64.60
33.00 68.00
38.10 70.00
38.10 81.00
39.70 89.00
44.00 90.00
46.00 93.00
50.80 91.00
55.00 95.00
62.00 94.00
71.00 105.00
PG
THD
7, 9,11
11,13.5
9,11,16
9,11,16
9,11,16,21
11,16,21
13.5,16,21
13.5,16,21
16,21,29
21,29
21,29,36
S
hell style
Jam Nut Receptacle with EGM B/S for shielded cable & PHM B/S Unshielded cable with sealing rubber bush
107TEGM/PHM
C
E
B
D
A
L
D
SHELL
SIZE
A
-2A THREADS
B
+0.0
-0.15
C
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20 UNEF
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
E
F
+-0.25
H
L
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
104.20
107.00
107.00
107.00
118.00
118.00
118.00
118.00
120.00
120.00
120.00
WALL THICKNESS
MIN
MAX
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
Jam Nut Receptacle with SQ type Shielded B/S & Environmental sealing Grommet & Heat
Shrinkable Option
D
B
A
F
SHELL
+0.0
C
E
H
WALL
THICKNESS
107TSQ
C
-2A THREADS
+-0.25
SIZE
E
-0.15
H
D
A
10SL
14S
16S
16
18
20
22
24
28
32
36
L
F
7/8" - 20 UNEF
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
MIN
MAX
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
L
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
66.00
70.20
70.20
80.00
81.00
81.00
82.00
82.00
84.00
84.00
84.00
Jam Nut Receptacle with Metric threaded type B/S suitable for Metric Glands
107TM
A
-2A THREADS
B
+0.0
-0.15
C
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20 UNEF
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
C
H
E
S
M THD
D
A
F
L
D
SHELL
SIZE
E
F
+-0.25
H
L
M
THD
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
66.00
70.20
70.20
80.00
81.00
81.00
82.00
82.00
84.00
84.00
84.00
M12X1.5
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
WALL THICKNESS
MIN
MAX
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
Jam Nut Receptacle with 900 B/S & Environmental sealing Grommet
107TRT
C
H
E
P
B
D
F
A
L
D
SHELL
SIZE
A
-2A THREADS
B
+0.0
-0.15
C
10SL
14S
16S
16
18
20
22
24
28
32
36
7/8" - 20 UNEF
1" 1/8-18 UNEF
1' 1/4-18 UNEF
1" 1/4- 18 UNEF
1" 3/8- 18 UNEF
1" 1/2- 18 UNEF
1" 5/8- 18 UNEF
1" 3/4- 18 UNS
2" - 18 UNS
2" 1/4- 16 UN
2" 1/2- 16 UN
18.20
24.60
27.40
27.40
30..80
34.20
37.40
40.90
46.70
53.40
59.60
24.50
26.80
26.80
32.10
33.70
33.70
33.70
33.70
35.20
35.20
35.20
37
WALL THICKNESS
MIN
MAX
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
5.20
7.50
7.50
7.50
9.00
9.00
9.10
9.10
8.50
6.50
8.30
E
F
+-0.25
H
L
'P'
MAX.
4.00
4.80
4.80
4.80
4.80
4.80
4.80
4.80
5.60
5.60
5.60
31.80
41.30
44.40
44.40
47.60
50.80
54.20
57.20
63.50
69.80
76.20
27.00
33.00
38.10
38.10
39.70
44.00
46.00
50.80
55.00
62.00
71.00
49.00
54.00
57.00
66.00
69.00
75.00
75.00
77.00
80.00
84.00
87.00
21.50
23.00
24.60
24.60
27.00
29.00
31.00
34.00
36.00
44.00
46.00
S
hell style
900 Plug Connector
108A=Supplied without grommet
108R=Supplied with grommet
P
A
L
T THD
SHELL
'A'
SIZE MAX.
'L'
MAX.
'P'
MAX.
'T'
THD
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
41.00
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
74.00
21.50
21.50
23.00
24.60
24.60
27.00
29.00
31.00
34.00
36.00
44.00
46.00
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
900 Plug connector with G type B/S for Heat Shrinkable & Environmental sealing Grommet
108G
P
Q
L
SHELL
SIZE
'A'
MAX
'L'
MAX
‘P'
MAX
10SL
12S
14S
16S
16
18
20
22
24
28
32
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
41.00
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
76.00
46.00
46.20
50.00
52.00
52.00
55.00
58.00
62.00
63.00
65.00
76.00
0
90 Plug connector with Strain Relief B/S & Environmental sealing Grommet
108E
P
Q
L
SHELL
SIZE
'A'
MAX.
'L'
MAX.
'P'
MAX.
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.39
46.10
46.60
53.40
60.10
36.30
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
70.00
74.00
38.00
40.00
41.00
45.00
45.00
48.00
50.00
52.00
56.00
58.00
68.00
70.00
0
90 Plug connector with PG threaded type B/S suitable for PG Glands
L
P
Q
108PG
PG THD
38
SHELL
SIZE
'A'
MAX.
'L'
MAX.
'P'
MAX.
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
41.00
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
74.00
7, 9, 11
50.00
7, 9, 11
50.00
11, 13.5
52.00
9, 11, 16
55.00
9, 11, 16
57.00
67.00 9, 11, 16, 21
11, 16, 21
69.00
13.5, 16, 21
74.00
75.00 13.5, 16, 21, 29
16, 21, 29
78.00
21, 29
85.00
21, 29, 36
98.00
PG
THD
S
hell style
900 Plug connector with EGM B/S for shielded cable & PHM B/S Unshielded cable with sealing rubber bush
108EGM/PHM
SHELL
'A'
SIZE MAX.
L
P
Q
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
'L'
MAX.
'P'
MAX.
41.00
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
74.00
91.00
91.00
91.00
93.00
93.00
95.00
97.00
99.00
102.00
103.00
111.00
113.00
900 Plug connector with SQ type Shielded B/S & Environmental sealing Grommet &
Heat Shrinkable Option L
108SQ
SHELL
'A'
SIZE MAX.
P
Q
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
22.80
25.60
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
'L'
MAX.
'P'
MAX.
41.00
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
74.00
49.00
51.00
55.00
56.00
56.00
59.00
60.00
63.00
66.00
67.00
75.00
77.00
900 Plug connector with Metric threaded type B/S suitable for Metric Glands
P
Q
108M
L
M THD
39
Shell
'A'
Size MAX.
‘L'
MAX.
'P'
MAX.
M
THD
10SL
14s
16s
6
18
20
22
24
28
32
36
41.00
41.00
43.00
53.00
55.00
60.00
60.00
64.00
64.00
70.00
74.00
49.50
49.50
49.50
52.00
63.00
65.00
67.00
73.00
75.00
85.00
98.00
M12X1.5
M16X1.5
M16X1.5
M16X1.5
M20X1.5
M25X1.5
M25X1.5
M32X1.5
M32X1.5
M36X1.5
M40X1.5
22.80
29.20
32.00
32.00
36.50
39.90
43.10
46.60
53.40
60.10
66.30
S
hell style
Panel mounting plug connector
97B - 3164 97B-4164
L3
e
LP
L4
L4
d2
e
l1
l3
+- 0.2
l4
+- 0.3
2.8
3.2
3.2
3.2
4
4
4
4
4
4
4
4
25.4
30
32.5
32.5
35
38
41
44.5
50.8
57
63.5
69.9
L1
All dimensions are in mm
Shell
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
d1
d2
Max
H13
22.8
29.2
32
32
36.5
39.9
43.1
46.6
53.4
60.1
66.3
72.5
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.7
3.7
4.3
4.3
4.3
e
+- 0.1
18.2
23
24.6
24.6
27
29.4
31.8
34.9
39.7
44.5
49.2
55.5
~
28.1
28.1
28.1
37.6
38.6
38.6
38.6
41
41.8
45
45
45
40
B
ack accessory
Solid backshell without grommet and sleeve
Class A
Q
L
V
A
All dimensions are in mm
A Thread
in inches
L max
for MS
L max
for 97B
Q
max
V
Thread
in inches
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
32.54
37.31
46.83
36.51
46.83
37.70
48.02
50.80
53.97
53.97
57.15
57.15
59.0
60.32
71.80
37.60
----37.64
--38.83
48.00
51.58
54.75
54.75
57.94
57.94
59.78
61.13
80.00
19.05
19.84
19.84
22.22
22.22
25.40
25.40
28.57
31.75
34.92
38.10
44.45
51.75
57.15
63.50
5/8-24 UNEF
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4 - 16 UN
Connector
Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
2 5/16-16 UN
Solid Backshell With Grommet & Sleeve
Class R
All dimensions are in mm
Connector
Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
Q
L
A
A Thread
class 2B
in inches
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-16 UN
For Plug type
L max
for MS
47
47
55
47
55
47
55
57
57
57
57
57
58.25
58.25
58.25
For Receptacle
L max
for 97B
48
----48
--48
56
57
57
57
57
57
60
60
60
Note - Both versions, straight and diamond knurling available on back accessories. For details, contact factory.
41
Q
max
21.50
20.35
20.35
23.40
23.40
26.71
26.71
29.50
35.70
35.85
44.40
45.08
52.36
56.81
64.50
B
ack accessory
Back Accessories
Strain relief backshell with grommet and sleeve
L
N
Class E and F
A
All dimensions are in mm
A Thread
class 2B
in inches
L max
for MS
L max
for 97B
N
max
5/8-24 NEF
11/16-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
54.07
54.07
55.90
55.90
64.41
65.94
67.41
67.41
73.28
73.28
74.75
74.75
86.0
59.10
--61.34
62.86
21.97
21.97
25.15
28.45
28.45
30.76
37.29
37.29
44.45
44.45
52.22
57.15
67.10
Connector
Size
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
40
2 5/16-16 UN
71.10
72.55
72.55
76.82
77.82
77.64
125.0
Right Angle Backshell With Or Without Grommet
L
L1
Q
Class A, F & R
A
V
All dimensions are in mm
Connector
Size
A Thread
class 2B
in inches
L max
for MS
L max
for 97B
L1
max
Q
max
V
Thread
in inches
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
40
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16UN
2 1/16-16UN
2 5/16-26 UN
37.60
37.80
47.30
39.40
48.90
42.60
52.10
53.70
58.80
58.80
63.60
63.60
69.60
72.80
76.00
45.00
----47.00
--48.00
57.00
58.00
61.00
61.00
66.00
66.00
72.00
75.00
78.00
25.00
25.00
25.00
27.00
27.00
28.00
28.00
31.00
34.00
34.00
37.00
39.00
45.00
48.00
55.00
22.22
25.40
25.40
28.57
28.57
31.75
31.75
34.13
37.30
40.48
43.66
50.00
56.50
62.71
62.71
5/8-24 UNEF
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4 -16 UN
Note - Both versions, straight and diamond knurling available on back accessories. For details, contact factory.
42
B
ack accessory
Heat Shrink
Boot adaptor (G)
B
A
C
3.50+0.20
L
B
L Max.
C- THD
20.30
30.00
5/8-24 NEF
22.30
27.00
3/4-20 UNEF
13.50
24.80
29.50
7/8-20 UNEF
14.60
18.70
20.80
24.60
27.00
33.30
38.50
48.20
28.50
Shell size
A Min.
10SL
7.70
8.20
10.60
12S
14S
16S
16
18
20
22
24
28
32
36
40
1-20 UNEF
1 1/8-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 5/8-18 NEF
1 7/8-16 UN
2 1/16-16 UN
2 5/16-16 UN
33.50
34.50
35.10
41.00
44.80
51.50
56.00
62.00
35.70
34.00
34.10
34.20
34.20
36.60
Back Accessories
Cable clamp
MS-3057
Use MS-3420 sleeves
B
C
A
All dimensions are in mm
Part number
Shell
size
Max OD
of cable
A
B
C
Thread
in inches
MS-3057-4A
10SL, 12S
5.59
20.90
21.39
7.94
5/8-24
MS-3057-6A
14, 14S
7.92
21.59
25.27
11.11
3/4-20
MS-3057-8A
16, 16S
11.10
23.37
28.45
14.29
7/8-20
23.37
30.89
15.87
1-20
19.50
1 3/16-18
MS-3057-10A
18
14.27
MS-3057-12A
20,22
15.87
23.07
35.03
MS-3057-16A
24,28
19.05
25.78
42.75
23.81
1 7/16-18
MS-3057-20A
32
23.80
28.00
51.00
31.70
1 3/4-18
MS-3057-24A
36
31.75
29.36
57.02
34.92
2-18
43
B
ack accessory
‘O’ Ring
G
PG
B
A
PG Adaptor
L
Shell
size
G Thread
in inches
10SL
12S
14
16
18
20
22
24
28
36
5/8-24
11/16-24
3/4-20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 5/8-18
2 1/8-18
PG 9
A
30
B
21
PG 11
L
26
PG 13
PG 16
A
B
L
A
B
L
23
25
30
35
23
25
26
26
30
30
37
40
23
23
30
PG 21
A
B
L
25
30
35
35
25
28
28
28
30
37
40
40
PG 29
A
B
L
35
35
38
45
35
35
35
37
40
40
40
45
PG 36
A
B
L
A
B
L
40
45
57
40
45
44
40
45
55
57
57
55
Ordering Information
MS - XX-PGYY
Where XX- Shell Size
YY-PG-Thread Size
L
EGM/PHM
Backshell Accessories
G
EGM INNER METAL FERRULE
‘O’ RING
PLASTIC CDMB
RUBBER BUSH
D
GLAND NUT
EGM BACKSHELL
Shell size
10SL
12SL
14
16
18
20
22
24
32
36
G Thread in inches
5/8”-24
11/16”-24
3/4”-20
7/8”-20
1”-20
1.1/8”-18
1.1/4”-18
1.3/8”-18
1.29/32”-18
2.1/6”-18
EGM/PHM 11
D
25.00
25.00
25.00
25.00
29.00
31.50
L
37.00
37.00
37.00
40.00
40.00
52.00
35.00
35.00
52.00
52.00
60.00
60.00
70.00
70.00
Note:- Rubber Bush supplied in Packing
In case of PHM inner metal Furrele is not required/supplied
EGM/PHM11 Can accept cable Min. 5.70 mm & Max. 10.85 mm
EGM/PHM21 Can accept cable Min. 12.70 mm & Max. 17.85 mm
44
EGM/PHM 21
D
27.00
27.00
27.00
27.00
31.00
33.50
35.00
35.00
52.00
52.00
L
41.00
41.00
41.00
43.00
43.00
55.00
60.00
60.00
70.00
70.00
B
ack accessory
Neoprene Sleeve
MS-3420
Rubber bushing. Protects wire bundles and unjacketed cables from possible damage by cable clamp.
D
F
B
A
C
E
45 0
All dimensions are in mm
E Rad
in inches
Part number
A
MS-3420-3
3.30
5.33
9.50
73.02
0.79
F Rad
in inches
0.79
MS-3420-4
5.59
7.67
12.70
69.85
0.79
0.79
MS-3420-6
7.92
10.84
15.59
66.67
0.79
1.59
1.59
B
C
D
MS-3420-8
11.10
14.02
18.77
63.50
1.59
MS-3420-10
14.27
15.62
21.94
60.32
1.59
1.59
MS-3420-12
15.87
18.80
26.23
56.20
1.59
1.59
MS-3420-16
19.05
23.54
26.39
53.97
1.59
1.59
MS-3420-20
23.80
31.50
40.41
50.80
1.59
1.59
MS-3420-24
31.75
34.67
46.79
47.62
1.59
1.59
Plain Flat Gasket
For MS and 97B flange mounted receptacles
B
A
O
C
C
A
OD
4 HOLES
T
All dimensions are in mm
Part number
Shell size
A max
B
C
D
MS-101000
MS-108686
MS-101001
MS-101002
MS-101003
MS-101004
MS-101005
MS-108687
MS-101006
MS-108688
MS-101007
MS-110831
10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
40
18.26
20.62
23.01
24.61
27.00
29.36
31.75
34.90
39.70
44.45
49.22
55.77
15.90
19.05
22.20
25.40
28.57
31.75
34.90
38.10
44.45
50.80
55.57
61.92
25.40
27.80
30.15
32.50
34.90
38.10
41.20
44.45
50.80
57.15
63.50
69.85
4.35
4.35
4.35
4.35
5.15
5.15
5.15
5.15
5.15
5.55
5.55
5.55
45
T
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
P
rotective cap for 97B
'B'
'D'
97B-25042
INK MARK A CONN. NO. &
BATCH CODE AS PER BOM.
All dimensions are in mm
'A'
'B'
SHELL
MAX.
MAX.
SIZE
10 SL
14 S
16 S
16
'D'
+ 0.60/-0
21.0
27.50
33.50
20
37.0
22
40.0
24
43.0
28
49.50
32
56.0
36
62.50
40
73.0
'E'
MIN.
90.0
23.50
4.30
30.0
18
'E' + ONE LINK
'A'
For Plugs
100.0
115.0
4.70
130.0
5.50
190.0
31.50
'B'
Protective Cap For 97B Series
97B-25043
'D'
INK MARK A CONN. NO. &
BATCH CODE AS PER BOM.
All dimensions are in mm
SHELL
SIZE
'A'
MAX.
10 SL
23.0
14 S
30.0
16 S
16
'B'
+ 0.20
'D'
+ 0.60/-0
16.0
'E'
MIN.
90.0
32.50
18
37.0
20
40.50
22
43.50
24
47.0
28
54.0
32
60.50
36
67.0
40
73.0
4.30
100.0
115.0
20.70
5.50
160.0
Note :- Please add 07 suffix for bigger end link. Applicable for Jam Nut
46
'E' + ONE LINK
'A'
For Receptacle
C
rimp Contact Details
Pin - Male Crimp Contact
L
CONTACT
'A'
SIZE
97B - 106433
97B - 108295
97B - 109388
97B - 108386
97B - 108384
97B - 112067
B
A
D
C
CONTACT
PART NO
16S
16
12
8
4
0
'B'
1.59 3.10
1.59 3.10
2.39 4.78
3.60 7.85
5.70 11.10
9.05 15.00
Socket - Female Crimp Contact
Contact Size 12, 16, 16S
Contact Size 8
Contact Size 4
Contact Size 0
CONTACT
PART NO
CONTACT
SIZE
'B'
97B - 108456
97B - 108457
97B - 110262
97B - 108387
97B - 111878
97B - 112068
16S
16
12
8
4
0
3.10
3.10
4.78
7.85
11.10
15.00
47
'C'
'D'
1.72 2.60
1.72 2.60
2.51 3.96
4.57 6.75
7.15 9.50
11.90 13.90
'L'
26.30
34.20
37.00
37.00
40.00
44.45
'C'
'D'
1.72 2.60
1.72 2.60
2.51 3.96
4.57 6.75
7.15 9.50
11.90 13.90
'L'
26.00
30.50
36.60
40.70
40.70
44.45
Dummy Receptacle Rear Side Closed
‘R’ SQ.
oD
SHELL
+0.0
SIZE
-0.13
‘M’
‘K’
‘A’
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
‘D’
FLANGE RELATIVE TO
HOLES
EQUAL WITHIN 0.38
(8 PLACES)
‘S’ SQ
Q
(4 HOLES)
‘T’
Q1
‘A’
18.19
21.30
24.59
'K'
+-0.38
-0.0
Q
T
R
'M'
S
+-0.10 Q1 +0.18
+0.23
+0.18
+-0.13
-0.0
-0.25
0.20
2.79
3.20
27.38
30.78
34.16
37.36
40.87
46.68
53.36
59.56
25.40 18.21 33.32
28.05 20.60 36.20
30.0 23.01 39.67
14.20
3.23
M4
32.51 24.61 42.87
35.05
38.0
40.99
44.45
3.99 3.73
50.80
57.10
4.32 M5
63.50
19.0
20.60
22.20
27.0
29.39
31.80
34.90
39.70
44.50
49.20
46.02
50.80
53.98
60.32
66.68
76.20
84.12
Dummy Receptacle Rear Side Open (Hollow)
‘R’
‘Q’
oD
SHELL
+0.0
SIZE
-0.13
‘M’
‘K’
(4 HOLES)
‘A’
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
‘D’
FLANGE RELATIVE TO
HOLES EQUAL WITHIN
0.38 (8 PLACES)
‘S’ SQ.
‘T’
SQ.
SECTION ‘A-A’
Q1
‘A’
18.19
21.30
24.59
'K'
+-0.38
-0.0
Q
T
R
'M'
S
+-0.10 Q1 +0.18
+0.23
+0.18
+-0.13
-0.0
-0.25
0.20
2.79
25.40 18.21 33.32
28.05 20.60 36.20
30.0 23.01 39.67
14.20
3.20
3.23
27.38
30.78
34.16
37.36
40.87
46.68
53.36
59.56
19.0
20.60
22.20
M4
32.51 24.61 42.87
35.05
38.0
40.99
44.45
3.99 3.73
50.80
57.10
M5
4.32
63.50
27.0
29.39
31.80
34.90
39.70
44.50
49.20
46.02
50.80
53.98
60.32
66.68
76.20
84.12
ORDERING INFO
97B-3105-XX-CF
SERIES DESIGNATION
CF-CLOSED FLANGE
HF-HOLLOW FLANGE
DESIGNATION FOR
DUMMY RECEPTACLE
SHELL SIZE
Thru Bulkhead Receptacle
L
K
A
S SQ
M
R SQ
Q
ORDERING INFO
TBH-97BS-XX-YY PS
THRU BULKHEAD SERIES
SHELL
SIZE
'A'
+0.0
-0.15
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
18.21
21.40
24.61
27.41
27.41
30.81
34.19
37.39
40.89
46.71
53.39
59.59
'M'
'K'
+0.41
+-0.20
-0.0
2.79
3.20
3.20
3.20
3.20
3.99
3.99
3.99
3.99
3.99
3.99
3.99
14.20
14.20
14.20
14.20
19.00
19.00
19.00
19.00
20.60
20.60
22.20
22.20
'R'
+-0.10
'S'
+-0.20
'L'
MAX.
18.20
20.60
23.00
24.60
24.60
27.00
29.40
31.80
34.90
39.70
44.50
49.20
25.40
28.00
30.00
32.50
32.50
35.00
38.00
41.00
44.50
50.80
57.00
63.50
37.75
37.75
37.75
37.75
51.40
51.40
51.40
51.40
51.40
51.40
51.40
51.40
PIN & SOCKET CONTACT
SERIES DESIGNATION
INSERT ARRANGEMENT
48
MS/97B Connector- Accessories
Crimp contact
Contacts for MS/97B connectors are machined from copper alloys and silver plated for maximum corrosion
resistance, with a minimum millivolt drop and a maximum current carrying capacity; the size 16 and 12 socket
contacts are of the closed entry design. Gold plated contacts are also available.
Part Number
For Crimp Contacts
only*
MS-106433
Pin/
Socket
Pin
MS-108456
Socket
MS-108295
Pin
MS-108457
Socket
MS-108388
Pin
MS-110262
Socket
MS-108386
Pin
MS-108387
Socket
MS-108384
Pin
MS-111878
Socket
MS-112067
Pin
MS-112068
Socket
Mating End
Size
Wire Barrel
Size
16 Short†
16
16 Long
16
12
12
Allowable
Wire size
Test Current***
Amps
Insertion/Removal
Tool
16
18
60
22**
16
18
20
22**
13
10
7.5
5
13
10
7.5
5
12
14
23
17
97B-IR-12
97B-IR-16
97B-IR-16
8
8
8
10**
46
33
97B-IR-8
4
4
4
6**
80
60
97B-IR-4
0
0
0
1
2**
150
125
97B-IR-0
* Solder contacts are not sold as separate items. Part numbers shown here are for crimp contacts only.
** When using wire adapter sleeve shown.
*** Contact rating as stated are test ratings only. The connecter may not withstand full rated current through all
contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors.
This is left entirely in the designer`s hands as he can best determine which peak voltage, switching surges,
transients, etc. can be expected in a particular circuit.
MS/97B Connectors
Application tools
When proprietary crimp contacts are employed rather than the standard MS
approved solder contacts, the following application tools are recommended for use.
There is a possibility of additional crimping tools other than those included being
available at present or in the future for this specific application.
TOOLING CHART
Crimping
Tool
Positioner/
Turret
M22520/1-01
*
M22520/1-01
*
**
**
**
**
**
**
* Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266
** For appropriate crimp tool and positioner refer to Pico Crimping Tool Co.
† Tools used with Arbor Press 11-7364
49
O
rdering MS/97B series
To obtain the specific connector required, write down the connector number from the typical example below. Only inserts
shown in the availability chart shown on page 7 can be specified. Connectors are delivered with protective plastic dust
covers. Include premating contact designation only if premating contact is required. The second letter in the premating
contact designation stands for the actual contact position. B at the end of the connector number indicates telescopic
bushing provided.
MS - 3
A - 18 - 19 - P - W - PC - PTC9
100
PC- Premating
contact designation
Series designation
See pages 8 to 18
MS - Threaded version
97B - Bayonet version
3
4
Alternate positions
W-X-Y-Z
(No suffix - Normal)
- Solder
- Crimp
See insert orientations on page 6.
Shell style
100 - Wall mounting
receptacle
101
102E
Cable connecting
receptacle
- Box mounting receptacle (Do not
accept accessory)
103
-
Back box mounting receptacle
(Do not accept accessory)
103X
-
Back Box Mounting Receptacle
to accept the accessory (Replace X with
suitable accessory)
Dummy receptacle
105 105A 106
107
107X
108
Contact type
-
P - Pin contacts
S - Socket contacts
Standard - Silver plating
Note : Contact factory for gold
plating part number.
Insert arrangement
Straight plug connector without
accessory & serration
See pages 7 to 18
-
Straight plug to accept the
accessory (Replace X with
suitable accessory)
- Jam nut Receptacle (Do not
accept accessory)
- Jam nut Receptacle to accept
accessory (Replace X with
suitable accessory)
- Right angle plug connector
Shell size
10S, 10SL, 12S, 12, 14S,
14, 16S, 16, 18, 20, 22,
24, 28, 32, 36.
Connector Modification
Connector class (Accessory/Backshell)
A -Solid Backshell suitable for straight Plug
AG - Solid Backshell with Enviromental sealing Grommet
F - Strain relief Backshell with Enviromental sealing Grommet (E & F are
same)
R- Shorter length Backshell with Environmental sealing grommet
PGXX - PG Threaded Backshell to accept the PG gland (Replace XX with
suitable thread size)
MXX - Metric Threaded Backshell to accept the Metric gland (Replace XX
with suitable thread size)
G- Backshell suitable for heat shrink tubing with Environmental sealing
Grommet
SQ- Backshell suitable for heat shrink tubing & shielding with
Environmental sealing Grommet
EGM- Backshell with Metal ferrule suitable for shielded cable to suit
variable cable sizes
PHM- Backshell with out Metal ferrule suitable for unshielded cable to suit
variable cable sizes
RT- Right angle Backshell suitable for 100,101,103X Style
Note: Connector 3103 supplied in two types. Connector with rear end
thread to accept backshell & without rear end thread. To order 3103
without rear end thread do not add any connector class such as
( A,E,F,R...) & hence it is similar to 3102 with Back Box mount
For e.g 97B-3103-18-1P-622 Connector without thread
Standard connector supplied with Cadmium plating with
Olivedrab Chromate Green conductive Finish
622 - Cadmium Free Zinc Cobalt Green conductive Finish
(RoHS Compliant)
624 - Cadmium Free Zinc Cobalt Black conductive Finish
(RoHS Compliant)
726 - Electrophoratic Black Non conductive finish (RoHS
Compliant)
A23 - Electoless Nickel Finish (RoHS Compliant)
9 - No solder Filling to contact applicable only for MS connector
563 - 0.5 micron gold plated contacts (standard silver plated
contacts)
97BS - If added to receptacle part number connector supplied
with SS wear pin
97BS - If added to Plug part number connector supplied with
Roller Stud (Shell Size 18-40)
B - Strain relief BIS supplied with M3420 bushing
CXX - Crimp contact suitable XX AWG size
F0/LC - Less contacts
F42 - Less grommet & backshell
HD - Heavy duty coupling ring
RFI - Plug conn with grounding fingure
SQG - Square flange gasket applicable to receptacle for
(100/102/103)
SR - MS3057 - XXA Cable Clamp
SRC - MS3057 - XXC Cable Clamp
T 00 - Metric THD holes in Flange Applicable for (100/102/103)
PTC9 - PC Tail Connector (Refer Page 25)
Notice : All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances,
Amphenol reserves the right to change specifications without notice. This publication ACRMS02 03/13 MS AND 97B Series
Connectors supercedes all existing Amphenol literature on MS AND 97 B Series Connectors.
50
NORTH AMERICA
Sales & Product Support
Amphenol PCD
72 Cherry Hill Drive
Beverly, MA 01915 USA
Tel: +1-978-624-3400
Fax: +1-978-927-1513
[email protected]
www.amphenolpcd.com
www.backshellworld.com
Amphenol Aerospace Operations
40-60, Delaware Avenue
Sidney, NY 13838-1395
Tel: +1-607-563-5011
Fax: +1-607-563-5357
Amphenol Canada
Meford Drive
Scarborough,
ON MIB 2X6
Tel: +416-291-4401
Fax: +416-292-0647
Amphenol Fiber Systems International
1300 Central Expressway North
Suite 100 Allen,Texas 75013, USA
Tel: +1-214-547-2400
Fax: +1-214-547-9344
EUROPE
France
United Kingdom
Germany
Italy
Amphenol Socapex S.A.S.
948,Promenade de I'Arve
Bp29, Thyez Cedex
74311, France
Tel: +33-4-5089-2800
Fax: +33-4-5096-1941
Amphenol Limited
Thanet Way, Whitstable
Kent CT5 3JF, England
Tel: +44-1227-773-200
Fax: 44-1227-276-571
Amphenol-Air LB GmbH
Am Kleinbahnhof 4
Saarlouis
D-66740, Germany
Tel: 49-6831-9810-00
Fax: 49-6831-9810-30
Via Barbaiana 5
20020 Lainate (Milano)
Italy
Tel :+39-02-93254.209
+39-02-93254.214
Fax:+39-02-93254-444
Spain
Austria
Amphenol Iberica
Edificio Burgosol Oficina
N 55 C/Comunidad de
Madrid 35 bis Las Rozas (Madrid)
Tel: +34-91-6407302
+34-91-6407306
Fax:+34-91-6407307
Amphenol Austria
Wiener Gasse 68
2380, Erchtoldsdarf,
Austria
Tel : + 43-69910396071
Fax: + 43-69940306071
Holland
Amphenol Benelux
Zadelmaker 121
NL-2401 PD Alphen
aan den Rijn Holland
Tel:+31-172-444903
Fax:+31-172 240254
Amphenol Air-LB
Immeuble Le Doublon
11, Avenue Dobonnet
Courbevoice-Cedex
92407, France
Ph: +33-1-4905-3000
Fax: +33-1-4905-3043
Center & East Europe
Amphenol
Wiener Gasse 68
2380 Perchtoldsdorf
Tel: +43-699-10396071
Fax: +43 699 40396071
Sweden
Amphenol
Industrial and Military &
Aerospace
Nordic & Baltic
Military Phone/
Mobile+46702129200
Industrial +46 767909560
ASIA
India
Amphenol Interconnect India Pvt. Ltd.
105 Bhosari Industrial Area
Pune-411026, India
Tel: +9120-3068-8305
Fax:+9120-2712-9158
Amphenol Interconnect India Pvt. Ltd.
61 Electronics City
Bangalore-560 100, India
Ph: +9180-2852-3838
Fax: +9180-2852-0418
Japan
Amphenol Japan
471-1, Deba, Ritto City
Shiga 520-3041, Japan
Tel: +81-77-553-8501
Fax: +81-77-551-2200
Singapore
Amphenol East Asia Ltd.
72 Bendemeer Road
# 03-33 Luzerne
Singapore 339 941
Tel: 65-6294-2128
Fax: 65-6294-3522
Korea
Amphenol Daeshin Electronics
558 SoSa, SongNae, Bucheon-City
Kyunggi-Do, Korea 420-130
Tel: +82-32-610-3800
Fax: +92-32-673-2507
China
Amphenol PCD Shenzhen
3/F Building, A4 Songbai
Industrial Park
East Road of Minghuan
Gongming Town, Baon District
Shenchen, China
Tel: +86-755-8173-8000
Fax: +86-755-8173-8180
ROW
Australia
Africa
Russia
Amphenol Australia Pty Ltd
2 Fiveways Boulevard
Keysborough
VIC 3173
Ph: +61-3-8796-8888
Fax: +61-3-8796-8801
Amphenol South Africa
30 Impala Road
2196 Sandton-Chistlehurston
South Africa
Tel: +27-11-783-9517
Fax: +27-11-783-9519
Amphenol Russia
8-2 Yaroslavskaja Str
129164 Moscow, Russia
Tel: +7-495-937-6341
Fax: +7-495-937-6319
Israel
Bar-Tec Ltd.
P.O. Box 279
Kfar Sava, 44102 Israel
Tel: +972-9-7644100
Fax: +972-9-7674324
Maslak
34396 Istanbul
Tel: +90-212-335-2501
Fax: +90-212-335-2500
Brazil
Amphenol do Brasil Ltda
Rua Diogo Moreira 132
CEP 05423-010
Sao Paulo-SP, Brazil
Tel: +55-11-3815-1003
Fax: +55-11-3815-1629
Argentina
Amphenol Argentina
Avenida Callao 930
2nd Floor, Office B Plaza
C1023AAP Buenos Aires
Argentina
Tel: 54-11-4815-6886
Fax: 54-11-4814-5779
Bangalore Operations
Pune Operations
Our offices in India:
MARKETING
HEADQUARTERS
Southern Region
Northern and Eastern Region
105, Bhosari Industrial Area,
Pune - 411 026.
Tel.: 91-20-30688303, 30688304
Fax : 91-20-30688321
Email : [email protected]
[email protected]
4931, 11th Floor, High Point IV
45, Palace Road, Bangalore 560 001.
Tel.: 91-80-22281392, 22281002
Fax : 91-80-22253859
Email : [email protected]
1414, 14th Floor, Chiranjiv Tower,
43, Nehru Place, New Delhi - 110 019.
Tel. : 91-11-26449177
Telefax : 91-11-26449176
Email : [email protected]
Export
Western Region
Central Region
105, Bhosari Industrial Area,
Pune - 411 026, India.
Tel.: 91-20-30688305, 30688353
Fax : 91-20-27129158
Email : [email protected]
105, Bhosari Industrial Area,
Pune - 411 026.
Tel.: 91-20-27119735, 30688334
Fax: 91-20-27120581, 27119735
Email : [email protected]
107, 1st Floor, ‘Am Sri Classic’,
Sarojinidevi Road, Secunderabad - 500 003.
Telefax : 91-40-66332906
Email : [email protected]
www.amphenol-in.com