micro-d to alphalink flex jumpers Contact arrangements • materials and finishes • hardware options • dimensions • PCB layout Micro-D to AlphaLink Flex Jumpers MICRO−D High-reliability Micro-D MIL-DTL-83513 type rectangular connectors in 7 contact arrangements, terminated with rugged polyimide-based flex to high-performance AlphaLink SL board level connectors. Recommended Micro-D I/O to AlphaLink Contact Arrangements* 1 2 6 3 7 4 8 5 1 9 2 3 Micro-D to AlphaLink flex jumper 4 9 3 8 2 3 4 5 1 8 6 5 1 6 6 5 4 3 2 1 11 10 9 8 16 8 7 6 2 3 4 5 6 7 8 4 3 2 14 9 28 1 2 3 4 5 14 15 16 17 18 19 20 21 22 23 24 25 1 13 12 11 10 9 8 7 6 5 4 3 2 25 24 23 22 21 20 19 18 17 16 15 14 15 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 37 pin 7 6 5 4 3 2 1 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 37 socket 31 socket 16 1 20 32 17 40 1 21 32 Contacts 40 Contacts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 51 pin 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 32 9 10 11 12 13 28 Contacts 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 * These are recommended contact arrangements only, but do offer best availability. Contacts are mapped 1-to-1 from I/O to B/L connector (unused B/L contacts not connected). For alternative wire schedules, please consult factory. 6 7 8 1 31 pin G 4 5 25 socket 1 9 10 11 12 13 14 15 16 8 3 21 socket 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 16 15 14 13 12 11 10 9 2 25 pin 5 16 Contacts 10 Contacts 1 21 20 19 18 17 16 15 14 13 12 15 socket 1 9 10 11 21 pin 15 14 13 12 11 10 9 9 socket 10 7 6 7 8 12 13 14 15 16 17 18 19 20 21 15 pin 2 7 1 6 7 8 9 10 11 12 13 14 15 9 pin 5 4 5 8 7 6 5 4 3 2 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 51 socket 1 21 20 40 40 Contacts © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 1 To optimize the 40-contact AlphaLink board level connector, 40 contacts of a 51-contact size Micro-D connector can be used. 1 micro-d to alphalink flex jumpers Contact arrangements • materials and finishes • hardware options • dimensions • PCB layout Table I- Shell Material/Finish Sym 1 2 3 5 33 Table Ii (I/O Connector Dimensions) Description Aluminum Alloy-Cadmium Aluminum Alloy-Electroless Nickel Stainless Steel-Pasivated Aluminum Alloy-Gold Aluminum Alloy-Ni/Pfte Shell Size 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S Table Iii- I/O Hardware Options Sym R1 R2 R3 R4 R5 R6 Description (Rear Panel Mount) Jackpost for .032 Thick Panel Jackpost for .047 Thick Panel Jackpost for .062 Thick Panel Jackpost for .093 Thick Panel Jackpost for .125 Thick Panel Jackpost for .080 Thick Panel A ±.005 B ±.003 C Max D Max E±.003 F±.005 G±.005 .960 (24.4) .960 (24.4) 1.110 (28.2) 1.110 (28.2) 1.260 (32.0) 1.260 (32.0) 1.360 (34.5) 1.360 (34.5) 1.510 (38.4) 1.510 (38.4) 1.660 (42.2) 1.660 (42.2) 2.035 (51.7) 2.035 (51.7) .565 (14.4) .565 (14.4) .715 (18.2) .715 (18.2) .865 (22.0) .865 (22.0) .965 (24.5) .965 (24.5) 1.115 (28.3) 1.115 (28.3) 1.265 (32.1) 1.265 (32.1) 1.615 (41.0) 1.615 (41.0) .334 (8.5) .400 (10.2) .484 (12.3) .550 (14.0) .634 (16.1) .700 (17.8) .734 (18.6) .800 (20.3) .884 (22.5) .950 (24.1) 1.034 (26.3) 1.100 (27.9) 1.384 (35.2) 1.450 (36.8) .184 (4.7) .250 (6.4) .184 (4.7) .250 (6.4) .184 (4.7) .250 (6.4) .184 (4.7) .250 (6.4) .184 (4.7) .250 (6.4) .184 (4.7) .250 (6.4) .228 (5.8) .296 (7.5) .183 (4.6) .195 (5.0) .183 (4.6) .195 (5.0) .183 (4.6) .195 (5.0) .183 (4.6) .195 (5.0) .183 (4.6) .195 (5.0) .183 (4.6) .195 (5.0) .183 (4.6) .195 (5.0) .529 (13.4) .541 (13.7) .529 (13.4) .541 (13.7) .529 (13.4) .541 (13.7) .529 (13.4) .541 (13.7) .529 (13.4) .541 (13.7) .529 (13.4) .541 (13.7) .529 (13.4) .541 (13.7) .775 (19.7) .775 (19.7) .925 (23.5) .925 (23.5) 1.075 (27.3) 1.075 (27.3) 1.175 (29.8) 1.175 (29.8) 1.325 (33.7) 1.325 (33.7) 1.473 (37.4) 1.473 (37.4) 1.990 (50.5) 1.990 (50.5) * Contacts mapped 1-to-1 from I/O to B/L connector (unused B/L contacts not connected). For alternative wire schedules, please consult factory. Table IV - B/L Connector Dimensions Layout 4 8 10 16 20 28 32 40 Aa .527 (13.4) .627 (15.9) .677 (17.2) .827 (21.0) .927 (23.5) 1.127 (28.6) 1.227 (31.2) 1.427 (36.2) Bb .350 (8.9) .450 (11.4) .500 (12.7) .650 (16.5) .750 (19.1) .950 (24.1) 1.050 (26.7) 1.250 (31.8) BB Ø.042 Typ. Pads .150 10 1 11 .050 20 .050 Typ .025 2x Ø.080 Mounting Holes Recommended PCB Layout (See Table IV) 33 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 G micro-d to alphalink flex jumpers Rear panel mount environmental Micro-D connector to AlphaLink SL flex jumper 1770-2449 GRPM panel-mount micro-d Input/Output (I/O) connector to alphalink SL spring loaded contact Board Level (B/L) connector How To Order 1770-2449 Sample Part Number 1770-2449 2 -15 Series / Basic Part No. GRPM Panel-Mount Micro-D I/O connector to Series 171 AlphaLink SL I/O Material / Finish See Table I I/O Connector Shell Size -9, -15, -21, -25, -31, -37, -51 (See Table II) I/O Contact Style P = Pin/Plug S = Socket/Receptacle I/O Hardware Option R1 = Jackpost for .032 Thick Panel R2 = Jackpost for .047 Thick Panel R3 = Jackpost for .062 Thick Panel R4 = Jackpost for .093 Thick Panel R5 = Jackpost for .125 Thick Panel R6 = Jackpost for .080 Thick Panel AlphaLink Shell size -4, -8, -10, -16, -20, -28, -32, -40 (See Table IV) AlphaLink Finish 2 = Nickel 5 = Gold AlphaLink Hardware Option T = Threaded thru hole Omit for thru hole Assembly Length 3 = 3.00 ± .05 inches 6 = 6.00 ± .05 inches 12 = 12.00 ± .05 inches Optional Shielding S = With shielding Omit for none S R1 -16 2 T -6 S Table I- Shell Material/Finish Sym 1 2 3 5 33 Description Aluminum Alloy-Cadmium Aluminum Alloy-Electroless Nickel Stainless Steel-Pasivated Aluminum Alloy-Gold Aluminum Alloy-Ni/Pfte materials and finishes G B/L connector shell: Aluminum alloy. I/O shell: See Table I Insulator: High-grade rigid dielectric Socket interfacial seal: Fluorosilicone Contacts: Copper Alloy/Gold Plated Potting: Epoxy Hardware: Stainless steel/passivated Notes Input/Output Micro-D rectangular environmental connector: I/O connector designed to meet the performance requirements of MIL-DTL-83513 (MWDM series) I/O interface dimensions IAW MIL-DTL-83513 Unused cavities in I/O connector to be populated with contacts IAW MIL-DTL-83513 Contacts mapped 1-to-1 from I/O to B/L connector (unused B/L contacts not connected). For alternative wire schedules, please consult factory. 34 Board Level AlphaLink SL connector: B/L AlphaLink SL connectors are built in accordance with Glenair drawing 171-134-02 B/L connectors are paired with I/O connectors as shown in Contact Arrangements diagram, page 32 Flex Performance: Shielding - EMI shielding film. Bend radius is 6 to 10 times the flex thickness. Typical flex will be .01 ± .005 thick, rugged, potted, polyimidebased flex. Flex cables are terminated from the I/O connector to the B/L connector on a 1 to 1 connection (unused B/L contacts are not connected) Workmanship shall be IAW IPC-6013, Class 2. Consult factory for more options and/or special designs and requirements © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 micro-d to alphalink flex jumpers Rear panel mount environmental Micro-D connector to AlphaLink SL flex jumper 1770-2449 I/O .480 D Max Skt 1 B A C Max Pin 1 E F .310 Max G Assembly Length See Part Number Development Pin #1 .050±.002 Typ. .183 2x 0-80 UNF-2B Thru Threaded Or 2x Ø.080 Thru Hole BB AA .258 .032±.015 Typ B/L Alpha Link SLC 35 Ø.021/.017 Typ © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 G