MIL-DTL-24749 TYPE IV Ground Straps for Navy shipboard applications G round straps utilized in shipboard applications are subject to grueling environmental conditions: wet, cold, salt water spray, and caustic hydraulic fluids. Conventional copper braid/copper lug ground straps corrode, and become a source of electrical resistance problems in these harsh environments. Glenair MIL-DTL-24749 Rev B Type IV ground straps solve these corrosion and electrical resistance problems with a unique 50% Stainless Steel 316L / 50% Nickel 200 36AWG blend braid, and passivated Stainless Steel lugs. These US Navy-approved ground straps are qualified to the rigorous standards of M24749, and are tested beyond the mil-spec to survive 1000 hours salt spray. Allowed usages for Type IV straps can be found in MIL-STD-1310H. Glenair MIL-DTL-24749 Rev. B Type IV Stainless Steel/Nickel Ground Straps: US Navy qualified and tested to survive extreme environments Meets the rigorous specifications of MILDTL-24749 Rev. B Tested to survive 1000 hours salt spray Unique Stainless Steel/ Nickel hybrid braid Available in six standard configurations, with non-standard length/ lug size configurations available For more information contact Glenair at 818-247-6000 or visit our website at www.glenair.com U.S. CAGE code 06324 MIL-DTL-24749 REV B TYPE IV Stainless Steel/Nickel Ground Straps How To Order MS24749 Sample Part Number –IV Product Series MIL-DTL-24749 Rev. B Type IV bond strap Bond Strap Type IV = Flat CRES 316 / Nickel 200 braid with mounting lugs Standard Size Code A = 6.0" length; 1.0" width, .406 H dia. B = 12.0" length, 1.0" width, .406 H dia. C = 18.0" length, 1.0" width, .406 H dia. N = for non-standard sizes –B –L –H D = 6.0” length; 1.0" width, .282 H dia. E = 12.0” length, 1.0" width, .282 H dia. F = 18.0” length, 1.0" width, .282 H dia. Non-Standard Length Non-Standard length in inches (omit for standard sizes) Hole Diameter Non-Standard diameter in inches (omit for standard sizes) L H HOLE DIA. 2 PLACES .550 (14.0) ±.015 (.38) 2 PLACES SST/NICKEL 200 BRAID (See Note 1) .90 (22.90) ±.030 (.76) 2 PLACES 1.10 (27.94) ±.030 (.76) 2 PLACES .050 (1.27) ±.010 (.25) .150 (3.81) (REF.) 2 PLACES NOTES 1.Lugs are ink stamped or electro-etched per M24749 Rev B. Minimum character height shall be .06 (1.52) 2.Metric dimensions (mm) indicated in parentheses 3.Codes A – F are standard lengths. To order non-standard straps, omit Standard Size Code and enter length (in inches) in part number. MATERIAL/FINISH Lugs - 316L Stainless Steel/Passivate Braid - 316L Stainless Steel 36 AWG, 50%; 200 Nickel 36 AWG, 50% 2 © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324