series 28 HiPer-D Standard and High-Density Connectors 280-028P right angle PC tail pin connectors with low profile mounting flange Low profile right angle PC tail HiPer-D pin connectors feature rugged machined aluminum shell and stainless steel cover for improved EMI protection. Contacts are non-removable, size #20 or #22. Intermateable with standard M24308-type D-Subminiature connectors, the HiPer-D features a resilient face seal for environmental protection and optional ground springs for improved resistance to electromagnetic interference. Threaded holes on the bottom of the connector allow attachment to circuit board. Contacts are potted with epoxy. Glass-reinforced thermoset epoxy insulators, fluorosilicone face seal. 1000 VAC, 5 Amps (#22) or 7.5 Amps (#20). B Shell Size - Contact Arrangements How To Order 280-028P Sample Part Number 4h62 Basic Part Number 280-028P Shell SizeContact Arrangement Contact Arrangements are shown in the adjacent table Shell Finish ME = Electroless Nickel (RoHS) MT = Nickel-PTFE (RoHS) JF = Cadmium with Yellow Chromate Z2 = Gold (RoHS) Z1 = Passivated Stainless Steel (RoHS) Mating Hardware PC Tail Length n a Shell SizeContact Arr. Contact Size and Qty #20 #22 Standard Density 1S9 9 2S15 15 3S25 25 4S37 37 5S50 50 High Density 1h15 15 2H26 26 N = No Hardware (supplied with #4-40 tapped holes) P = #4-40 Female Jackposts 3H44 44 4H62 62 A = .125 (3.18) Tail Length B = .250 (6.35) Tail Length 5H78 78 6H104 104 Materials and Finishes Aluminum alloy Copper alloy, 50 microin. gold plated Thermoset epoxy Epoxy Fluorosilicone rubber 300 series stainless steel Current Rating Test Voltage Insulation Resistance Operating Temperature Ingress Protection Shock Vibration, Random B-24 g G = Supplied with EMI Ground Spring N = No Ground Spring Ground Spring Shell Contacts Insulators Potting Compound Interfacial Seal Hardware me Specifications #22 5 AMPS, #20 7.5 AMPS 1000 VAC RMS 5000 megohms minimum -65° C. to +200° C. IP 67 300 g. 43.92 g. Mating Hardware N No Hardware #4-40 Female Threads in Mounting Holes Choose this option for rear panel mounting and order jackpost kit 289-016 separately. © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 P #4-40 Female Jackposts series 28 HiPer-D Standard and High-Density Connectors 280-028P right angle PC tail pin connectors with low profile mounting flange 280-028p dIMENSIONS 4-40 UNC 2B TH'D .150 (3.81) MIN. DEEP TYP 2PL OR #4-40 JACKPOST 2PL A C D SEE PCB FOOTPRINTS E B B 10° TYP 2 PL .318 (8.08) STD DENSITY SIZE #20HD CONTACTS .030±.002(0.76±0.05) PC TAIL LENGTH HI DENSITY SIZE #22D CONTACTS ± .015 (3.81) .020±.002(0.51±0.05) .262±.003 (6.65±0.08) 4-40 UNC 2B TH'D .150 (3.81) MIN. DEEP TYP 2PL C Shell Size 1 2 3 4 5 6 in A mm in 30.81 39.14 53.04 69.32 66.93 69.32 .494 .494 .494 .494 .605 .668 B mm ± .015 ± 0.38 ± .015 ± 0.38 1.213 1.541 2.088 2.729 2.635 2.729 12.55 12.55 12.55 12.55 15.37 16.97 C Basic in D E mm in mm 18.44 26.77 40.49 56.95 54.33 57.71 .389 9.88 .389 9.88 .389 9.88 .389 9.88 .501 12.73 .563 14.30 in. mm ± .005 ± 0.13 ± .005 ± 0.13 .984 1.312 1.852 2.500 2.406 2.500 24.99 33.32 47.04 63.50 61.11 63.50 .726 1.054 1.594 2.242 2.139 2.272 Notes B-25 1. Contacts are factory-installed, non-removable and are potted with epoxy. 2. HiPer-D connectors are available with a wide variety of materials and finishes. See About Series 28 HiPer-D Shell Plating Options for additional choices . Glenair offers the industry’s widest selection of plating and material choices with no setup charge, no minimum order quantity and no schedule impact. 3. For panel cutout dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 4. For printed circuit board mounting dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 5. HiPer-D connectors meet the requirements of MIL-DTL-24308 and are intermateable with standard M24308-type D-Subminiature connectors with corresponding contact arrangements and type. 6. Additional electrical, mechanical and environmental specifications are listed in HiPer-D Product Specification. © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324