MIL-DTL-83513 Micro-D 500-010 EMI/RFI Micro-D Banding Backshell Round Cable Entry Glenair’s Most Popular Micro-D Backshell is stocked in all sizes. Choose straight, side or 45° cable entry. Rugged One-Piece Aluminum shell with stainless steel hardware, available in standard nickel plating, or choose optional finishes. 17-7PH Stainless Steel Clips attach the backshell to the connector. These backshells accept standard and micro BandMaster™ ATS shield termination straps. Note: It is easy to exceed the maximum allowable wire bundle diameter for the cable entry on these miniaturized backshells. Please see the table on C-3 for assistance, or chose an elliptical backshell entry design instead. How To Order EMI/RFI Backshells 500T010 Sample Part Number Series Shell Finish Shell Size Hardware Option Cable Entry Code EMI Band Strap Option Table I: Maximum Cable Entry Code Shell Size 9 15 21 25 31 37 51 51-2 67 69 100 Style E &T 08 08 08 08 09 09 10 09 09 10 12 Style D Style S 06 08 08 08 09 09 10 09 09 10 12 09 10 10 12 12 12 12 12 12 12 12 © 2014 Glenair, Inc. M 25 H 08 500S010 - Side Entry 500T010 - Top Entry 500E010 - 45° Entry 500D010 - Dual 45° (See Table III) A - Cadmium Plate/Bright Dip N - Cadmium Plate/Olive Drab; Over Nickel B - Cadmium Plate/Olive Drab NF - Cad/O. D. Over Electroless; Nickel B1 - Cadmium Plate/Olive Drab, Type II Class 1 (1000 Hour Salt Spray) J - Gold Iridite Over Cadmium; Plate Over T - Cadmium Plate/Bright Dip Over Nickel Nickel Z2 - Gold Plate M - Electroless Nickel Z1 - Passivate, Stainless;Steel Material 09, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 100 (See Table III) EJ - (2) Male Extended (Style T and S Only) B - (2) Fillister Head Jackscrew BJ - (2) Male Fillister Head F - (2) Jackpost, Female H - (2) Hex Head Jackscrew FB - (1) Female Jackpost, (1) Male Filister Head HJ - (2) Male Hex FH - (1) Female Jackpost, (1) Male Hex Socket E – (2) Extended Jackscrew N - No Hardware 05 - .156 (4.0) 06 - .188 (4.8) 07 - .219 (5.6) 08 - .250 (6.4) 04 - .125 (3.2) 09 - .281 (7.1) 10 - .312 (7.9) 11 - .344 (8.7) 12 - .375 (9.5) (See Table I) Omit (Leave Blank) - Band Not Included Standard Band - .250" Wide K - Coiled Band Included B - Uncoiled Band Included Use the following codes to order band strap with Micro Band - .125" Wide the connector. For best availability, order band M - Uncoiled Band Included L - Coiled Band Included separately. Table II: Maximum Cable Entry Dimensions In. mm. 04 P ±.015 In. ± mm. ± .015 0.38 .125 3.2 .296 7.5 05 .156 4.0 .327 8.3 06 .188 4.8 .359 9.1 07 .219 5.6 .390 9.9 08 .250 6.4 .421 10.7 09 .281 7.1 .452 11.5 10 .312 7.9 .484 12.3 11 .344 8.7 .515 13.1 12 .375 9.5 .546 13.7 Cable Size R Dia. Max Rectangular Connector Backshells Notes 1. Assembly identified with manufacturer's name and P/N 1. 51-2 shell size is for a special 51 position 2 row Micro D connector 2. Knurled or ribbed banding platform - manufactures option 3. EMI gasket mounts between mating connector and panel Materials/Finish • Shell: Aluminum Alloy 6061 -T6 Per QQ-A-200, QQ-A-225 (Machined Components) Aluminum Alloy 6061-T6 Per QQ-A-591 (A380) (Die-Cast Components) • Clips, E-Rings: 17-7PH Stainless Steel • Jackscrews, Washers, Jackposts: 300 Series Stainless Steel, Passivated U.S. CAGE Code 06324 Rev 8-18-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-14 MIL-DTL-83513 Micro-D 500-010 EMI/RFI Micro-D Banding Backshell Round Cable Entry Table III: Dimensions Available for Style T and S Only Style T - Top Entry Code B E R Max Typ P Typ .04 Min .06(1.5) L .44(11.2) Code BJ Configuration Mfr Option D F .175 (4.4) Code EJ Extended Jackscrew H Connector Shown For Reference Only Code E Floating Extended Jackscrew H Style E - 45° Entry Code F Female Jackpost Style S - Side Entry M .390 (9.9) N .188(4.8) G K Code HJ Hex Socket Jackscrew Code H Extended Jackscrew Configuration Mfr Option Style D - 45° Dual Entry EMI Gasket Option (559-005) See Note 4 C Optional Configuration See Note 3 M Code S Qwik-Ty N B A Size 09 15 21 25 31 37 51 51-2 67 69 100 A Max. In. mm. .850 21.59 1.000 25.40 1.150 29.21 1.250 31.75 1.400 35.56 1.550 39.37 1.500 38.10 1.910 48.51 2.310 58.67 1.810 45.97 2.235 56.77 B Max. In. mm. .370 9.40 .370 9.40 .370 9.40 .370 9.40 .370 9.40 .370 9.40 .410 10.41 .370 9.40 .370 9.40 .410 10.41 .460 11.68 © 2014 Glenair, Inc. In. .565 .715 .865 .965 1.115 1.265 1.215 1.615 2.015 1.515 1.800 C mm. 14.35 18.16 21.97 24.51 28.32 32.13 30.86 41.02 51.18 38.48 45.72 D Max. In. mm. .780 19.81 .910 23.11 1.030 26.16 1.090 27.69 1.150 29.21 1.190 30.23 1.220 30.99 1.220 30.99 1.220 30.99 1.220 30.99 1.280 32.51 E Max. In. mm. .410 10.41 .580 14.73 .740 18.80 .850 21.59 .980 24.89 1.130 28.70 1.080 27.43 1.510 38.35 1.880 47.75 1.380 35.05 1.470 37.34 F Max In. mm. .350 8.89 .470 11.94 .590 14.99 .650 16.51 .710 18.03 .750 19.05 .780 19.81 .780 19.81 .780 19.81 .780 19.81 .840 21.34 G Max In. mm. .637 16.18 673 17.09 .707 17.95 .748 19.00 .756 19.20 .774 19.66 .859 21.82 .859 21.82 .859 21.82 .859 21.82 1.014 25.76 Rectangular Connector Backshells H Max. In. mm. .350 8.89 .470 11.94 .590 14.99 .650 16.51 .710 18.03 .750 19.05 .780 19.81 .780 19.81 .780 19.81 .780 19.81 .840 21.34 J Max. In. mm. .637 16.18 .673 17.09 .707 17.95 .748 19.00 .756 19.20 .774 19.66 .859 21.82 .859 21.82 .859 21.82 .859 21.82 1.014 25.76 In. .435 .440 .458 .483 .476 .478 .548 .548 .548 .548 .687 K mm. 11.05 11.2 11.63 12.27 12.09 12.14 13.91 13.91 13.91 13.91 17.45 L Max. In. mm. 1.040 26.42 1.170 29.72 1.290 32.77 1.350 34.29 1.420 36.07 1.450 36.83 1.480 37.59 1.480 37.59 1.480 37.59 1.480 37.59 1.580 40.13 U.S. CAGE Code 06324 Rev 8-18-14 M Max. In. mm. 1.000 25.40 1.030 26.16 1.050 26.67 1.090 27.69 1.130 28.70 1.230 31.24 1.250 31.75 1.250 31.75 1.250 31.75 1.250 31.75 1.320 33.53 N Max. In. mm. .680 17.27 .730 18.54 .765 19.43 .830 21.08 .890 22.61 .955 24.26 1.005 25.53 1.005 25.53 1.005 25.53 1.005 25.53 1.080 27.43 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-15