Series 72 Annular Tubing 713-376 Guardian System - Composite Convoluted Tubing to Bulkhead Feed-Thru Fitting for Series 72 Annular Convoluted Tubing Composite Guardian System convoluted tubing to bulkhead feed-thru fitting How To Order Product Series Basic No. B 713 S Bulkhead Size (Table III) 376 XM 16 Angle: S = Straight Finish (Table II) “D” Hole Mounting Flat (Omit for None) B = Band K = Precoiled (Omit if Not Required) 12 B Entry Size (Table IV) T D Shrink Boot Option (See Table IV, Omit if Not Required) 1.00 Max .135 O-Ring .380 .060 Conduit O-Ring 2X Conduit Retaining Clip Flat For “D” Hole Mounting (See P/N Development) D Flats Typ ØC A Thread Conduit I.D. ØF Max Tubing Shown For Reference Only Accomodates 600-052-1 Band Band Option (K Option Shown) E D-Cut .125 Max Panel Thickness Typ Shrink Sleeve Or Boot Groove Material and Finish • Adapter and Jam nut: High grade engineering thermoplastic/See Table II • O-Rings: Silicone/NA • Retaining clip: High grade engineering thermoplastic/no plating Tools and Assembly notes ØB Recommended Panel Cutout © 2012 Glenair, Inc. • Conduit retaining clip and conduit O-Ring to be supplied unassembled • For effective grounding, connector with conductive finish should be used • Glenair assembly procedure is recommended for adapter to conduit termination. See Guardian assembly procedure at the end of this section U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-30 E-Mail: [email protected] Series 72 Annular Tubing 713-376 Guardian System - Composite Convoluted Tubing to Bulkhead Feed-Thru Fitting for Series 72 Annular Convoluted Tubing Bulkhead Size 06 08 09 10 12 14 16 20 24 28 32 40 A Thread Class 2A 7/16-28 UNEF 1/2-20 UNF 9/16-24 UNEF 9/16-24 UNEF 5/8-24 UNEF 11/16-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 3/16-8 UNEF 1 5/16-18 UNEF 1 1/2-18 UNEF Table III: Bulkhead Size/Dimensions Ø B +.015 D ØC -.000 Flats 0.443 (11.3) 0.188 (4.8) 0.688 (17.5) 0.505 (12.8) 0.250 (6.4) 0.750 (19.1) 0.568 (14.4) 0.281 (7.1) 0.812 (20.6) 0.568 (14.4) 0.312 (7.9) 0.812 (20.6) 0.630 (16.0) 0.375 (9.5) 0.875 (22.2) 0.693 (17.6) 0.438 (11.1) 0.938 (23.8) 0.755 (19.2) 0.500 (12.7) 1.000 (25.4) 0.880 (22.4) 0.625 (15.9) 1.125 (28.6) 1.005 (25.5) 0.750 (19.1) 1.250 (31.8) 1.193 (30.3) 0.875 (22.2) 1.438 (36.5) 1.318 (33.5) 1.000 (25.4) 1.562 (39.7) 1.505 (38.2) 1.250 (31.8) 1.812 (46.0) Symbol XM XW XB XMT Entry Code 06 © 2012 Glenair, Inc. E +.010 -.000 0.385 (9.8) 0.448 (11.4) 0.510 (13.0) 0.510 (13.0) 0.573 (14.6) 0.635 (16.2) 0.698 (17.7) 0.822 (20.9) 0.948 (24.1) 1.135 (28.8) 1.260 (32.0) 1.448 (36.8) Max Entry Size 09 12 12 12 16 16 20 20 24 32 32 40 B Table II: Finish Finish Description Electroless Nickel Cad/Olive Drab over Electroless Nickel Black color/Unplated Nickel-PTFE Table IV: Entry Code/Dimensions/Shrink Boot Conduit I.D. ØF Shrink Boot Max Min Max .53 (13.5) .16 (4.1) .19 (4.8) 770-001S103 09 12 16 .63 (16.0) .73 (18.5) .86 (21.8) .24 (6.1) .33 (8.4) .45 (11.4) .28 (7.1) .37 (9.4) .50 (12.7) 770-001S103 770-001S104 770-001S104 20 24 28 32 40 .98 (24.9) 1.15 (29.2) 1.27 (32.3) 1.40 (35.6) 1.62 (41.1) .57 (14.5) .69 (17.5) .81 (20.6) .93 (23.6) 1.18 (30.0) .62 (15.8) .75 (19.1) .87 (22.2) 1.00 (25.4) 1.25 (31.8) 770-001S105 770-001S106 770-001S107 770-001S107 770-001S107 U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-31 E-Mail: [email protected]