Series 72 Guardian 710-860 Direct Attachment Guardian T Transition For Series 72 Annular Convoluted Tubing Direct-attachment Guardian T transition How To Order “B” End, Conduit Entry Size (Table I) Finish (Table II) Product Series 710 - 860 M Basic No. 09 “A” End, Conduit Entry Size (Table I) “B” End 09 B = Band K = Precoiled (Omit for none) 09 B “C” End, Conduit Entry Size (Table I) T Shrink Boot (Omit if not required) See Table I .135 typ .380 typ .060 typ Conduit o-ring 2x typ Conduit retaining clip typ C Max Conduit A Max Typ I.D. Typ “C” End “A” End tubing shown for reference only B Max accomodates 600-052-1 band shrink sleeve or boot groove band option (k option shownsee notes) Material and Finish Transition: See Table II O-ring: Silicone/NA Retaining clip: High-grade engineering thermoplastic/NA Tools and Assembly notes Conduit retaining clip and conduit O-rings to be supplied unassembled Glenair assembly procedure AP74-010 is recommended for adapter to conduit termination Glenair 600 Series backshell assembly tools are recommended for assembly and installation ©2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 30 Series 72 Guardian 710-860 Direct Attachment Guardian T Transition For Series 72 Annular Convoluted Tubing Table I Entry Size A Max Conduit I.D. Min B Max Max (4.1) .19 (4.8) 2.359 (59.9) C Max Shrink Boot Ref 1.180 (30.0) 770-001S103 06 .53 (13.5) .16 09 .63 (16.0) .24 (6.1) .28 (7.1) 2.454 (62.3) 1.227 (31.2) 770-001S103 12 .73 (18.5) .33 (8.4) .37 (9.4) 2.559(65.0) 1.280 (32.5) 770-001S104 16 .86 (21.8) .45 (11.4) .50 (12.7) 2.689(68.3) 1.345 (34.2) 770-001S104 20 .98 (24.9) .57 (14.5) .62 (15.7) 2.809 (71.3) 1.405 (35.7) 770-001S105 24 1.15 (29.2) .69 (17.5) .75 (19.1) 2.979 (75.7) 1.490(37.8) 770-001S106 28 1.27 (32.3) .81 (2.6) .87 (22.1) 3.099 (78.7) 1.550(39.4) 770-001S107 32 1.40 (35.6) .93 (23.6) 1.00 (25.4) 3.229(82.0) 1.615 (41.0) 770-001S107 40 1.62 (41.1) 1.18 1.725 (43.8) 770-001S107 (3.0) 1.25 (31.8) 3.449(87.6) Table II Sym Finish Description M Electroless Nickel MT Nickel-PTFE NF Aluminum Cad/Olive Drab over Electroless Nickel ZN Zinc Nickel/Olive Drab over Electroless Nickel ZNU Zinc Nickel/Black over Electroless Nickel Z1 ©2011 Glenair, Inc. Material Stainless Steel Passivate CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 31