Series 72 Annular Tubing 713-356 Guardian System - Composite Convoluted Tubing to Connector Backshell for Series 72 Annular Convoluted Tubing Composite Guardian System convoluted tubing to connector backshell, EMI/RFI* Environmental How To Order Angle: S = Straight T = 45° W = 90° Product Series B 713 *EMI/RFI when conductive finish is specified H S Connector Designator A = MIL-DTL-83723, Ser. 1 & 3 MIL-DTL-5015, MS3400 MIL-C-26482, Ser. 2 F = MIL-DTL-38999, Ser. I & II H = MIL-DTL-38999, Ser. III & IV Finish (Table II) 356 XM 19 Basic No. Shell Size (Table III) K = Supplied with precoiled band, 600-052-1 (Omit for none) Entry Code (Table IV) 16 D K Drain Hole Option (Omit for None) T Shrink Boot option See Table IV (Omit for none) Anti-Decoupling Device - Typ C Flats Typ 1.4 (35.6) Max .44 (11.2) Typ O-Ring - Typ As Required A Thread - Typ Ø B - Typ Symbol S Straight Conduit O-Ring 2X Typ Conduit Retaining Clip Typ Conduit I.D. ØJ Tubing Shown For Ref. Only Accommodates 600-052-1 Band - Typ Shrink Sleeve Or Boot Groove - Typ Band Option (K Option ShownSee Notes) Material and Finish • • • • • Elbow, adapter: High grade engineering thermoplastic/See Table II Coupling nut: High grade engineering thermoplastic, black/no plating Conduit retaining clip: High grade engineering thermoplastic/no plating Anti-decoupling device: Corrosion resistant material/NA O-Rings: Silicone/NA Tools and Assembly notes • Conduit retaining clip and conduit O-Ring to be supplied unassembled. • For effective grounding, connector with conductive finish should be used. • Glenair assembly procedure is recommended for adapter to conduit termination. See Guardian assembly procedure at the end of this section © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-28 E-Mail: [email protected] Series 72 Annular Tubing 713-356 Guardian System - Composite Convoluted Tubing to Connector Backshell for Series 72 Annular Convoluted Tubing Connector Designator A Shell A Thread Size Class 2B 08 1/2-20 UNF 10 5/8-24 UNEF 12 3/4-20 UNEF 14 7/8-20 UNEF 16 1-20 UNEF 18 1 1/16-18 UNEF 20 1 3/16-18 UNEF 22 1 5/16-18 UNEF 24 1 7/16-18 UNEF Conn Desig A,F H 08 10 12 14 16 18 20 22 24 09 11 13 15 17 19 21 23 25 D ±.06 (1.5) .69 (17.5) .75 (19.1) .81 (20.6) .88 (22.4) .94 (23.9) .97 (24.6) 1.06 (26.9) 1.13 (28.7) 1.19 (30.2) Table III: Connector Designators/Dimensions Connector Designator F Connector Designator H Ø B Max Shell A Thread Shell A Thread Size Class 2B Size Iso Metric 08 7/16-28 UNEF 09 M12 X 1.0-6H .83 (21.1) 10 9/16-24 UNEF 11 M15 X 1.0-6H .96 (24.4) 12 11/16-24 UNEF 13 M18 X 1.0-6H 1.09 (27.7) 14 13/16-20 UNEF 15 M22 X 1.0-6H 1.22 (31.0) 16 15/16-20 UNEF 17 M25 X 1.0-6H 1.35 (34.3) 18 1 1/16-18 UNEF 19 M28 X 1.0-6H 1.48 (37.6) 20 1 3/16-18 UNEF 21 M31 X 1.0-6H 1.62 (41.1) 22 1 5/16-18 UNEF 23 M34 X 1.0-6H 1.75 (44.5) 24 1 7/16-18 UNEF 25 M37 X 1.0-6H 1.89 (48.0) Table III (cont.) E F ±.09 ±.09 (2.3) (2.3) .88 (22.4) 1.19 (30.2) 1.00 (25.4) 1.25 (31.8) 1.13 (28.7) 1.31 (33.3) 1.31 (33.3) 1.38 (35.1) 1.38 (35.1) 1.44 (36.6) 1.44 (36.6) 1.47 (37.3) 1.63 (41.4) 1.56 (39.6) 1.75 (44.5) 1.63 (41.4) 1.88 (47.8) 1.69 (42.9) G ±.06 (1.5) .72 (18.3) .75 (19.1) .75 (19.1) .76 (19.3) .78 (19.8) .79 (20.1) .82 (20.8) .86 (21.8) .89 (22.6) H ±.09 (2.3) 1.00 (25.4) 1.06 (26.9) 1.13 (28.7) 1.16 (29.5) 1.18 (30.0) 1.19 (30.2) 1.22 (31.0) 1.26 (32.0) 1.29 (32.8) Entry Code 06 C Flats D Min .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) .736 (18.7) .860 (21.8) .980 (24.9) 1.100 (27.9) 1.224 (31.1) 1.348 (34.2) 1.469 (37.3) 1.581 (40.2) 1.690 (42.9) B Table IV: Entry Code/Dimensions/Shrink Boot Conduit I.D. ØJ Shrink Boot Max Min Max .53 (13.5) .16 (4.1) .19 (4.8) 770-001S103 09 12 16 20 .63 (16.0) .73 (18.5) .86 (21.8) .98 (24.9) .24 (6.1) .33 (8.4) .45 (11.4) .57 (14.5) .28 (7.1) .37 (9.4) .50 (12.7) .62 (15.8) 770-001S103 770-001S104 770-001S104 770-001S105 24 28 32 1.15 (29.2) 1.27 (32.3) 1.40 (35.6) .69 (17.5) .81 (20.6) .93 (23.6) .75 (19.1) .87 (22.2) 1.00 (25.4) 770-001S106 770-001S107 770-001S107 Symbol XM XW XB XMT E Max Table II: Finish Finish Description Electroless Nickel Cad/Olive Drab over Electroless Nickel Black color/Unplated Nickel-PTFE G Symbol W 90° H F Drain Holes Optional - Typ Tubing Shown For Ref. Only © 2012 Glenair, Inc. Symbol T 45° U.S. CAGE Code 06324 Tubing Shown For Ref. Only Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-29 E-Mail: [email protected]