Composite Backshells 311-019 Composite Lamp Base Thread EMI/RFI Shield Termination Backshell with Shrink Boot Porch and Self-Locking Rotatable Coupling CONNECTOR DESIGNATOR: A A MIL-DTL-5015, -26482 Series II, and -83723 Series I and III F H MIL-DTL-38999 Series I, II Angle and Profile S - Straight T - 45° Elbow W - 90° Elbow Product Series 311 - EMI/RFI Lamp Base Thread w/ Shrink Boot Porch MIL-DTL-38999 Series III and IV SELF-LOCKING B 311 ROTATABLE COUPLING STANDARD PROFILE H Finish Symbol (See Table III) S 019 Connector Designator A, F and H C O-Ring Typ (Except Connector Deisgnator 'A') A Thread Typ Cable Entry Basic Part Number (See Table IV) XM 15 03 Connector Shell Size (See Table II) T Shrink Boot (Omit for None) 1.25 Max .140/.130 Typ K Typ D Flutes or Hex Mfr. Option - Typ L Typ Shrink Sleeve or Boot Groove - Typ F E H E J F G Raised Configuration (Mfr. Option) Typ G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-6 Rev. 12 FEBRUARY 2013 Composite Backshells 311-019 Composite Lamp Base Thread EMI/RFI Shield Termination Backshell with Shrink Boot Porch and Self-Locking Rotatable Coupling TABLE II: SHELL SIZE Shell Size E ± .06 F ± .09 G ± .09 H ± .06 J ± .09 Max Dash Number (Table II) A, F H 08 09 0.69 (17.5) 0.88 (22.4) 1.19 (30.2) 0.72 (18.3) 1.00 (25.4) 02 10 11 0.75 (19.1) 1.00 (25.4) 1.25 (31.8) 0.75 (19.1) 1.06 (26.9) 03 12 13 0.81 (20.6) 1.13 (28.7) 1.31 (33.3) 0.75 (19.1) 1.13 (28.7) 04 14 15 0.88 (22.4) 1.31 (33.3) 1.38 (35.1) 0.76 (19.3) 1.16 (29.5) 05 16 17 0.94 (23.9) 1.38 (35.1) 1.44 (36.6) 0.78 (19.8) 1.18 (30.0) 06 18 19 0.97 (24.6) 1.44 (36.6) 1.47 (37.3) 0.79 (20.1) 1.19 (30.2) 07 20 21 1.06 (26.9) 1.63 (41.4) 1.56 (39.6) 0.82 (20.8) 1.22 (31.0) 08 22 23 1.13 (28.7) 1.75 (44.5) 1.63 (41.4) 0.86 (21.8) 1.26 (32.0) 09 24 25 1.19 (30.2) 1.88 (47.8) 1.69 (42.9) 0.89 (22.6) 1.29 (32.8) 10 B C TABLE IV: ENTRY DIAMETER Dash Number K Entry ± .03 L ± .06 01 .13 (3.3) .45 (11.4) 02 .25 (6.4) .52 (13.2) 03 .38 (9.7) .64 (16.3) Symbol 04 .50 (12.7) .77 (19.6) XM 2000 Hour Corrosion Resistant Electroless Nickel 05 .63 (16.0) .92 (23.4) XMT 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM XW 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel 06 .75 (19.1) 1.02 (25.9) 07 .81 (20.6) 1.14 (29.0) 08 .94 (23.9) 1.27 (32.3) 09 1.06 (26.9) 1.43 (36.3) 10 1.19 (30.2) 1.52 (38.6) 11 1.38 (35.1) 1.64 (41.7) TABLE III: FINISH D Finish Description E F NOTES © 2009 Glenair, Inc. A 1. See Table I in Intro for front-end dimensional details. 2. 770-001S**-0 shrink boot supplied with T option. See shrink boot product page for more details. 3. O-Ring will not be supplied with Connector Designator A. 4. Coupling nut supplied unplated. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-7 Rev. 12 FEBRUARY 2013 G