Composite Backshells 440-144 Composite Ultra Low Profile EMI/RFI Micro-Banding Backshell with Shrink Boot Porch and Self-Locking Rotatable Coupling CONNECTOR DESIGNATOR: A F H Angle and Profile S - Straight T - 45° Elbow W - 90° Elbow MIL-DTL-38999 Series I, II MIL-DTL-38999 Series III and IV SELF-LOCKING ROTATABLE COUPLING Product Series 440 - EMI/RFI Non-Environmental Micro-Banding Backshells 440 ULTRA LOW PROFILE B H Cable Entry (See Table IV) Omit for 90° Configuration Basic Part Number S 144 Connector Designator F or H Drain Hole Option (Omit "D" if not required) Shrink Boot Option Shrink boot supplied with T option Available for S and T profiles only (Omit for none) Finish Symbol (See Table III) XM 15 Connector Shell Size (See Table II) 09 D K Band Option Band supplied with K option (Omit for none) T S Slot Option S - Pigtail Termin. Slot (Omit for none) Anti-Decoupling Device TYP .962 Max C Pigtail Termination Slot .320 Typ D Dia. Typ D F Shrink Sleeve or Boot Groove Typ Optional ø.125 Drain Holes 3 Minimum Equally Spaced Typ Raised Configuration (Mfr's Option) G E E Optional ø.125 Drain Holes 3 Minimum Equally Spaced Typ H Shrink Sleeve or Boot Lip .32 Accomodates 600-057-1 Micro-Band F J G K © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-70 Composite Backshells 440-144 Composite Ultra Low Profile EMI/RFI Micro-Banding Backshell with Shrink Boot Porch and Self-Locking Rotatable Coupling TABLE II: SHELL SIZE F H Entry Code Available for Straight and 45° Configuration 08 09 04 .63 (16.0) 1.042 (26.5) 10 11 05 .66 (16.8) 1.107 (28.1) .432 (11.0) .174 (4.4) 12 13 07 .72 (18.3) 1.174 (29.8) .546 (13.9) .195 (5.0) 14 15 09 .83 (21.1) 1.241 (31.5) .670 (17.0) .315 (8.0) 16 17 05 and 11 .91 (23.1) 1.305 (33.1) .796 (20.2) .385 (9.8) Shell Size G Max H ± .03 J K .304 (7.7) .160 (4.1) 18 19 07 and 13 .93 (23.6) 1.371 (34.8) .902 (22.9) .445 (11.3) 20 21 09 and 15 1.04 (26.4) 1.438 (36.5) 1.027 (26.1) .525 (13.3) 22 23 11 and 16 1.12 (28.4) 1.505 (38.2) 1.152 (29.3) .595 (15.1) 24 25 07, 13 and 17 1.18 (30.0) 1.572 (39.9) 1.276 (32.4) .655 (16.6) TABLE IV: CABLE ENTRY A B C TABLE III: FINISH Dash Number D ± .03 E ± .06 F ± .09 04 .25 (6.4) .72 (18.3) .87 (22.1) 05 .31 (7.9) .75 (19.1) .93 (23.6) 07 .44 (11.2) .75 (19.1) 1.00 (25.4) 09 .56 (14.2) .76 (19.3) 1.03 (26.2) 11 .68 (17.3) .78 (19.8) 1.05 (26.7) 13 .81 (20.6) .79 (20.1) 1.06 (26.9) 15 .94 (23.9) .82 (20.8) 1.09 (27.7) 16 1.00 (25.4) .86 (21.8) 1.13 (28.7) 17 1.16 (29.5) .89 (22.6) 1.16 (29.5 ) Symbol Finish Description XM 2000 Hour Corrosion Resistant Electroless Nickel XMT 2000 Hour Corrosion Resistant Ni-PTFE, NickelFluorocarbon Polymer. 1000 Hour GreyTM XW 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel D E NOTES © 2009 Glenair, Inc. 1. 770-001S**-0 shrink boot supplied with T option. See shrink boot product page for more details. 2. Coupling nut supplied unplated. 3. See Table I in Intro for front-end dimensional details. CAGE Code 06324 F Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-71 G