Composite Backshells 447-327 Composite Standard Profile EMI/RFI Banding Backshell with Qwik-Ty® Strain Relief and Self-Locking Rotatable Coupling CONNECTOR DESIGNATOR: A B A MIL-DTL-5015, -26482 Series II, and -83723 Series I and III F L H G U MIL-DTL-38999 Series I, II Product Series 447 - EMI/RFI Non-Environmental Banding Backshells Finish Symbol Angle and Profile S - Straight W - 90° Elbow MIL-DTL-38999 Series III and IV MIL-DTL-28840 447 DG123 and DG123A SELF-LOCKING ROTATABLE COUPLING H S Basic Part Number 327 Connector Designator A, F, L, H, G and U XW C D F Anti-Decoupling Device E Cable Entry (See Table IV) 19 Connector Shell Size (See Table II) STANDARD PROFILE Anti-Decoupling Device Polysulfide Strips Termination area free of cadmium, XW finish only (Omit for none) (See Table III) MIL-DTL-38999 Series 1.5 (JN1003) Slot Option S - Pigtail Termin. Slot (Omit for none) Drain Hole Option (Omit "D" if not required) 13 D K Band Option 600-052-1 standard coiled band supplied with K option (Omit for none) P T S Shrink Boot Option Shrink boot and o-ring supplied with T option (Omit for none) 1.28 (32.5) X Dia .67 (17.0) Typ. Entry Diameter, Typ. E Raised Configuration (Mfr's Option) G Drain Holes (Optional) Use MS33671 Tie-Strap or Equivalent Pigtail Termination Slot Qwik-Ty® Strain Relief F G Shrink Sleeve or Boot Groove, Typ. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-76 Composite Backshells 447-327 Composite Standard Profile EMI/RFI Banding Backshell with Qwik-Ty® Strain Relief and Self-Locking Rotatable Coupling TABLE II: CONNECTOR SHELL SIZE Shell Size For Connector Designator* E A F/L H G U ±.06 (1.5) 08 08 09 – – .69 (17.5) 10 10 11 – 08 .75 (19.1) 12 12 13 11 10 .81 (20.6) 14 14 15 13 12 .88 (22.4) 16 16 17 15 14 .94 (23.9) 18 18 19 17 16 .97 (24.6) 20 20 21 19 18 1.06 (26.9) 22 22 23 – 20 1.13 (28.7) 24 24 25 23 22 1.19 (30.2) ±.09 .88 1.00 1.13 1.31 1.38 1.44 1.63 1.75 1.88 F (2.3) (22.4) (25.4) (28.7) (33.3) (35.1) (36.6) (41.4) (44.5) (47.8) G ±.09 (2.3) 1.36 (34.5) 1.42 (36.1) 1.48 (37.6) 1.55 (39.4) 1.61 (40.9) 1.64 (41.7) 1.73 (43.9) 1.80 (45.7) 1.86 (47.2) A Max Entry Dash No** 04 05 07 09 11 13 15 17 20 B **Consult factory for additional entry sizes available. C TABLE IV: CABLE ENTRY TABLE III: FINISH Symbol Finish Description XM 2000 Hour Corrosion Resistant Electroless Nickel XMT 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM XW 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel Entry Code 04 05 07 09 11 13 15 16 17 20 Entry Dia. ±.03 (0.8) .250 (6.4) .310 (7.9) .440 (11.2) .560 (14.2) .680 (17.3) .810 (20.6) .940 (23.9) 1.000 (25.4) 1.160 (29.5) 1.250 (31.8) X Dia. ±.03 (0.8) .510 (13.0) .510 (13.0) .510 (13.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) .630 (16.0) D E NOTES 1. 770-001S**-0 shrink boot supplied with T option. See shrink boot product page for more details. 2. Consult factory for O-ring to be supplied with part less shrink boot. 3. Metric dimensions (mm) are in parenthesis and are for reference only. 4. Coupling nut supplied unplated. 5. See Table I in Intro for front-end dimensional details. © 2009 Glenair, Inc. CAGE Code 06324 F Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-77 G