MS Series Description Non-Coded, Manual Fire Alarm Stations Model MS-2, MS-2H The MS-2 manual fire alarm stations are dual action devices. These stations require that the outer door be lifted to expose the actuation door which is then pulled forward to operate the alarm toggle switch. The actuation door is now locked in the readily observable “alarm” position. To reset the station, a key (common to Gamewell-FCI control panels) must be inserted and turned ¼ turn clockwise, opening the station. Closing the station resets the switch automatically An optional breakglass rod is available for positive indication of station operation. Model MS-2L (Institutional) Operation of the Model MS-2L institutional station requires that a special key be used to release the actuation door before it can be operated. Model MS-2-D (Multiple Contact) The MS-2-D features a DPST switch for multiple signaling via wire lead connections. Model MS-6 (Single Action) The MS-6 station is a single action device, requiring only the pulling of the action door to release the compressed button switch. It is available either with terminals (MS-6T) or wire leads (MS-6). The station resets in the same manner as the MS-2. The reset key is common to FCI control panels. Specifications Material (MS-2, MS-6) Doors (MS-2, MS-6) Switch Type MS-2 MS-6 Contact Material Contact Ratings MS-2 MS-6 Dimensions (overall) MS-2, MS-6 Extruded 6063/T5 aluminum Clear anodize Figure 1 MS-2 Figure 2 MS-2H Figure 3 MS-6 Features • Single and Dual Action Versions • Tumbler Lock for Test and Reset Keyed Alike with FCI Control Panels • Rugged Metal Construction • Positive Indication of Operation over 180° Viewing Angle • Surface or Semi-flush Mounting • Shock and Vibration Resistant • Institutional Version (MS-2L) • Optional “FIRE SUPPRESSION SYSTEM RELEASE” Markings (MS-2H) • Optional DPST Switch (MS-2-D) Enclosed toggle Enclosed push button Silver plated bronze or copper 6 amp. max. @ 30 VDC (resistive) 0.5 amp. max. @ 30 VDC (resistive) 5” H x 3.4” W x 2.8” D (12.7 cm x 8.64 cm x 7.11 cm) SIGNALING FM MEA Approved S2465 OJ3A9.AY/12880 (MS-2) 960-81-SA (MS-2) 7150-1703:0100 AD4A7.AY (MS-6, MS-6T) 103-93-E (MS-6) APPROVED GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9020-0358 Rev. J page 1 of 2 ©2013 by Honeywell International Inc. All rights reserved. Ordering Information Part Number Description 1100-0615 MS-2, Dual Action fire alarm station 1100-0634 MS-2H Dual Action station with “FIRE SUPPRESSION SYSTEM RELEASE” markings 1100-0621 MS-2L, Institutional fire alarm station 1100-0617 MS-2-D, Dual action station with DPST switch 1100-0632 MS-6, Single action station, wire leads 1100-0633 MS-6T, Single action station, terminals 2520-0023 BB-2, Surface backbox for MS-2, MS-6 stations 1120-0206 Package of two replacement breakglass rods for MS-2 station Figure 4 MS Series Installation GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9020-0358 Rev. J page 2 of 2 www.gamewell-fci.com