2192 Series HIGH VOLTAGE POWER SUPPLIES FEATURES y y y y y y y y y y y NEMA 1, Metal Enclosure Cost Effective Reliable Solid State Design Maintenance Free Automatic Over Current Shutdown and Recovery High Frequency Switchmode Design HV Meter on Front Panel to Monitor Output (voltage and current) High Load Current Alarm Contacts Shutdown (overload) Alarm Contacts RoHS Version Available Formerly CS2192 series TYPICAL ELECTRICAL SPECIFICATIONS TYPICAL APPLICATIONS y Electrostatic Paint Spray y Electrostatic Seasoning Application y Electrostatic Oil Spray DESCRIPTION y y y y y y The 2192 series of regulated solid state switching power supplies is designed for applications requiring a high voltage power supply. Input Voltage: 120 VAC (± 10%) 50 / 60 Hz. The 2192 series is packaged in a NEMA1 metal, enclosure and may be installed in any position. High Voltage Silicone grease is shipped in the high voltage connectors. Consult factory for additional information. y TYPICAL MECHANICAL SPECIFICATIONS y y y y NOTICE: This power supply requires adequate ground connection for operation. Failure to provide ground could result in failure of the power supply. 3227 Skylane Drive Carrollton, TX 75006 Input Voltage: 120 VAC (± 10%) 50/60 Hz Output Voltage: 60 to 90 kVDC Adjustable Output Current: 175 µA Max Output Power: 15 W Output Regulation: Regulated, see Typical V-I Curve Load: May be operated into any load condition (capacitive, resistive or inductive) or no load. Can withstand arcing and short circuits. Isolated Output; High Voltage referenced to Earth Ground Relay / Input Termination: Terminal strip located externally on enclosure High Voltage Termination: Tubular connections with integral strain relief seals, external to the metal case Enclosure: NEMA1 metal with hinged cover and knockouts Temperature Rating: Operating 0º to +60ºC Storage -40º to +85ºC 972-248-7691 www.hvpsi.com Rev. 3 Specifications subject to change without prior notification 2192 Series HIGH VOLTAGE POWER SUPPLIES MODEL INPUT VOLTAGE ACN2192L90 120 VAC INPUT OUTPUT VOLTAGE FREQUENCY Adjustable 50 / 60 Hz +60 to +90 kVDC Negative OUTPUT CURRENT 175 µA Formerly CS2098 Series 2192 SERIES TYPICAL V-I OUTPUT CURVE INPUT = 120VAC 100 90 HV OUTPUT (kVDC) 80 70 60 50 40 30 20 10 0 0 50 100 150 200 Iout (uA) Max Voltage Adjustment 3227 Skylane Drive Carrollton, TX 75006 Min Voltage Adjustment 972-248-7691 Specifications subject to change without prior notification www.hvpsi.com Rev. 1