Optical Encoders SERIES 62F 1/2'' Package, Lighted Shaft FEATURES •Integrated Self-Lighting System for Knob Illumination •1 Million Rotational Cycles •1/2" Package •Compatible with CMOS, TTL and HCMOS Logic •Optional Integral Pushbutton •Choices of Cable Length and Terminations •Customized Solutions Available APPLICATIONS •Global Positioning/Driver Information Systems •Medical Equipment •Cockpit Controls •Mixing Boards DIMENSIONS in inches (and millimeters) Pin Version .500 (12,7) .448 (11,4) .250 ± .002 (6,35 ± 0,05) DIA. .525 ± .015 (13,34 ± 0,38) .460 (11,68) REF .657±.015 (16,7±0,4) .219 ± .003 (5,56 ± 0,08) .390 (9,91) .250 (6,35) .540 (13,72 .152 ± .002 (3,86 ± 0,05) .250 (6,35) .250 (6,35) .500 (12,7) .250 ± .002 (6,35 ± 0,13) .320 (8,13) REF .010 (0,25)/ .510 ± .015 .025 (0,64) (12,95 ± 0,38) PUSH.525 ± .015 BUTTON (13,34 ± 0,38) TRAVEL .375 ± .015 (9,52 ± 0,38) .391 (10,0) REF .500 (12,7) .490 (12,45) .581±.010 (14,8±0,3) 4.00 ± .20 (.040 ± 5,08) .312 (7,92) 62FXX-01-XXXC XXXX X-X .070 .066 ± .002 (1,78) (1,68 ± 0,05) DIA .293 (7,4) REF .087(2,21) CONNECTOR .100 3/8-32 UNEF-2A THREAD 28 AWG (2,54) IS AMP THREADS TO BE WITHIN CABLE WIRES ON P/N 215083-6 STRIP.030 (0,76) OF SHOULDER PED .050 (1,27) AND CENTERS TINNED GRAYHILL Cable Version 3/8-32 UNEF-2A THREAD THREADS TO BE WITHIN .030 (0,76) OF SHOULDER 62FXX-XX-P-L XXXX X-X .581±.010 (14,8±0,3) With on-board lighting system GRAYHILL 654321 .375 ± .015 (9,53 ± 25,42) .490 (12,45) With on-board lighting system .360 (9,14) REF. GRAYHILL .250 (6,35) .236 (5,99) GRAYHILL 87654321 .152 ± .002 (3,86 ± 0,05) .250 (6,35) 62FXX-XX-P XXXX X-X .540 (13,72) .250 (6,35) 62FXX-XX-XXXC-L XXXX X-X Optical and Mechanical Encoders .390 (9,91) .010 (0,25)/ .025 (0,64) PUSH BUTTON TRAVEL .312 (7,92) 6 5 4 3 2 1 .219 ± .003 (5,56 ± 0,08) .657±.015 (16,7±0,4) 8 7 6 5 4 3 2 1 .066 ± .002 .070 (1,68 ± 0,05) (1,78) DIA Connector Stripped Version Version Unless otherwise specified, standard tolerance is ±.010 (0,25). Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical Encoders CIRCUITRY, TRUTH TABLE, AND WAVEFORM Standard Quadrature 2-Bit Code PIN #s POWER +5 V OUTPUT A R* R* GROUND 7 6 OUTPUT B POWER +5 V (LED) 8 150 5% NORMALLY OPEN PUSHBUTTON SWITCH GROUND OUTPUT A 5 4 OUTPUT B 3 HIGH LOW Clockwise Rotation Position Output A Output B 1 2 HIGH 3 LOW 4 1 2 2 3 4 5 POSITION NUMBER 1 6 • •• • • Indicates logic high; blank indicates logic low. Code repeats every 4 positions. * EXTERNAL PULL-UP RESISTORS REQUIRED FOR OPERATION (2.2k). ** Circuit shown with on-board lighting system. Versions without on-board lighting ** system do not have LED power connections. Refer to standard 62A series for circuitry. SPECIFICATIONS Pushbutton Switch Ratings Switch Ratings Coding: 2-bit quadrature coded output Operating Voltage: 5.0 ±.25 Vdc Voltage Breakdown: 250 Vac between mutually insulated parts Supply Current: 30 mA maximum Logic Output Characterisitics: Logic High: 3.8 Vdc minimum Logic Low: 0.8 Vdc maximum Rotational Life: 1,000,000 cycles minimum (One cycle is a rotation through all positions and a full return) Minimum Sink Current: 2.0 mA Power Consumption: 150mW maximum Optical Rise and Fall Times: less than 30 mS maximum Operating Torque: Detent: 2.0 ±1.4 in-oz initially Non-detent: less than 1.5 in-oz initially Shaft Push Out Force: 45 lbs minimum Mounting Torque: 15 in-lbs maximum Terminal Strength: 15 lbs cable pull-out force minimum Operating Speed: 100 RPM maximum Axial Shaft Play: .010 maximum Environmental Ratings Operating Temperature Range: -40°C to 85°C Storage Temperature Range: -55°C to 100°C Relative Humidity: 90–95% at 40°C for 96 hours Vibration Resistance: Harmonic motion with amplitude of 15G's, within a varied 10 to 2000 Hz frequency for 12 hours per MIL-STD-202, Method 204 Mechanical Shock: Test 1: 100G for 6 mS, half sine, 12.3 ft/s; Test 2: 100G for 6 mS, sawtooth, 9.7 ft/s Materials and Finishes Code Housing: Reinforced thermoplastic Shaft: Aluminum Bushing: Zinc casting Shaft Retaining Ring: Stainless steel Detent Spring: Stainless steel Printed Circuit Boards: NEMA grade FR-4 gold over nickel or palladium Terminals: Brass, tin-plated Mounting Hardware: One brass, nickel-plated nut and zinc-plated spring steel with clear trivalent chromate finish lockwasher supplied with each switch. (Nut is 0.094 inches thick by 0.433 inches across flats) Rotor: Thermoplastic Code Housing: Thermoplastic Pushbutton Dome: Stainless steel Dome Retaining Disk: Thermoplastic Pushbutton Housing: Thermoplastic Phototransistor: Planar Silicon NPN Pushbutton Contact: Brass, nickel-plated Flex Cable: 28 AWG, stranded/top coated wire, PVC coated on .050 or .100" centers (cabled version) Header Pins: Phospher bronze, tin-plated Spacer: ABS Backplate/Strain Relief: Stainless steel Light Pipe: Thermoplastic LED Housing: Thermoplastic ORDERING INFORMATION Series Angle of Throw: Detent Non-detent 11 = 11.25° or 32 pos. 01 = 11.25° or 32 positions 15 = 15° or 24 positions 05 = 15° or 24 positions 18 = 18° or 20 pos. 08 = 18° or 20 positions 22 = 22.5° or 16 positions 02 = 22.5° or 16 positions Pushbutton Option: 01 = w/o pushbutton, 02 = with pushbutton 62F22-01-040S-L LED: blank = no LED, L = supplied with LED Termination: S = Stripped cable; S-L = Stripped cable, LED; C = Connector; C-L = Connector, LED; P = Pin; P-L = Pin, LED Cable Termination: 040 = 4.0in. Cable is terminated with Amp P/N 215083-6. See Amp Mateability guide for mating connector details. *Eliminate cable length if ordering pins. (Ex: 62A22-02-P) Custom materials, styles, colors, and markings are available. Control knobs available. Available from your local Grayhill Component Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor, or Grayhill. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Optical and Mechanical Encoders Rating: 5 Vdc, 10 mA, resistive Contact Resistance: less than 10 ohms (TTL or CMOS compatible) Pushbutton Life: 3 million actuations minimum Contact Bounce: less than 4 mS at make and less than 10 mS at break Actuation Force: 1000 ± 300 grams Pushbutton Travel: .010/.025 inch