HWS506 GaAs MMIC SPDT Switch November 2009 Features USON 6L(2x2) • Low Insertion Loss: 0.50 dB @ 2.5 GHz • • • 0.75 dB @ 5.8 GHz Isolation: 25.0 dB @ 2.5 GHz 28.0 dB @ 5.8 GHz Low DC Power Consumption Miniature USON6L (2x2mm) Plastic Lead (Pb) Free and GP Compliant Package Description The HWS506 is a GaAs PHEMT MMIC SPDT switch operating at 0.5-6 GHz in a miniature USON 6L(2 x 2 mm) plastic lead (Pb) free package. The HWS506 features low insertion loss and high linearity with very low DC power consumption. This switch can be used in WiMAX or IEEE 802.11a/b/g WLAN PC card and access point applications as. transmit/receive switch, antenna diversity switch, or band-selection switch. Electrical Specifications at 25°C with 0, +3V Control Voltages Parameter Test Conditions Insertion Loss 0.50-6.00 GHz 2.30-2.70 GHz 3.30-3.90 GHz 5.15-5.88 GHz Isolation (INPUT Port to Off Port) 0.50-6.00 GHz 2.30-2.70 GHz 3.30-3.90 GHz 5.15-5.88 GHz Return Loss Input Power for One dB Compression Min. Typ. Max. Unit 0.75 0.50 0.50 0.75 0.60 0.70 0.90 dB dB dB dB 25.0 25.0 25.0 28.0 dB dB dB dB 0.50-6.00 GHz 12 dB 2.00-6.00 GHz @+3V @+5V 36 38 dBm dBm Pin=20dBm -75 dBc 25dBm Per Tone, 3.80 GHz 57 dBm Switching Time 10% to 90%, 90% to 10% RF 150 nsec Control Current @+3V 5 Second and Third Harmonics Input Third Order Intermodulation Intercept Point 20.0 20.0 24.0 100 uA Note: All measurements made in a 50Ω system with 0/+3V control voltages, unless otherwise specified. Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan, R.O.C.. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw Email: [email protected] All specifications are subject to change without notice. HWS506 GaAs MMIC SPDT Switch November 2009 Typical Performance at+25°C Typical Performance at+25°C Frequency =0.5GHz~2GHz Frequency =2GHz~6GHz Insertion Loss vs. Frequency -0. 1 Insertion Loss vs. Frequency -0. 1 RFC-RF1 RFC-RF2 -0. 2 RFC-RF1 RFC-RF2 -0. 2 ) -0. 3 B (d -0. 4 s s o L -0. 5 n io -0. 6 rt e s -0. 7 n I ) -0. 3 B d ( -0. 4 s s o L -0. 5 n o tir -0. 6 e s n -0. 7 I -0. 8 -0. 8 -0. 9 -0. 9 0. 5 0. 8 1. 1 1. 4 1. 7 2. 0 2. 0 2. 5 F re que nc y(GHz ) 4. 0 4. 5 5. 0 5. 5 6. 0 Isolation vs. Frequency -20 RFC-RF1 RFC-RF2 -25 -25 ) B d ( n -30 io t la o s I -35 ) B d ( n -30 o ti a l o s I RFC-RF1 RFC-RF2 -35 -40 -40 0. 5 0. 8 1. 1 1. 4 1. 7 2. 0 2. 0 2. 5 F re que nc y(GHz ) -10 3. 0 3. 5 4. 0 4. 5 5. 0 5. 5 6. 0 F re que nc y(GHz ) Return Loss vs. Frequency Return Loss vs. Frequency -10 RFC-RF1 RFC-RF2 -15 ) -15 B d ( ) B d ( -20 Return Loss Return Loss 3. 5 F re que nc y(GHz ) Isolation vs. Frequency -20 3. 0 -20 -25 -25 RFC-RF1 RFC-RF2 -30 -35 -30 -40 0. 5 0. 8 1. 1 1. 4 F re que nc y(GHz ) 1. 7 2. 0 2. 0 2. 5 3. 0 3. 5 4. 0 4. 5 5. 0 5. 5 6. 0 F re que nc y(GHz ) Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan, R.O.C.. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw Email: [email protected] All specifications are subject to change without notice. HWS506 GaAs MMIC SPDT Switch November 2009 Absolute Maximum Ratings Parameter Absolute Maximum RF Input Power +38dBm @ +3V Control Voltage +6V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Electrostatic Discharge Machine Model Class M1 Pin Out CA VC2 1 RF2 6 CB RFC 2 5 3 4 GND CB VC1 RF1 CA CB Note: 1. 2. 3. 4. DC blocking capacitors CB=8pF are required at 2~6GHz on all RF ports DC blocking capacitors CB=100pF are required at 0.5~2GHz on all RF ports. RF by-pass capacitors CA=8pF. Exposed pad in the bottom must be connected to ground by via holes. Logic Table for Switch On-Path VC1 VC2 RFC-RF1 RFC-RF2 1 0 On Off 0 1 Off On ‘1’ = +3.0V to +5V ‘0’ = 0V to +0.2V Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan, R.O.C.. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw Email: [email protected] All specifications are subject to change without notice.