CUSTOM COOLING SOLUTIONS: CASE STUDIES Custom Air Cooling Solutions CASE STUDIES PCIe CHALLENGE: Cooling solution needed for PCIe card with 55W device power dissipation requirement SOLUTION: Low profile unducted fansink with optimized fin geometry to use system airflow AUTOMOTIVE IoT CHALLENGE: Rugged enclosure cooling solution needed with required power of several 8W devices to be used in the Arrow SAM car SOLUTION: Heat sink/enclosure solution optimized for natural convection cooling in a harsh-sealed environment DATACOM CHALLENGE: Develop a compact air cooled solution for over 110W CPUs and other high power devices SOLUTION: Very compact, lightweight air cool solution, available with and without vapor chamber, with unmatched thermal resistance number in the industry of 0.13°C/W CHALLENGE: CPU & MOFSET cooling solution needed to meet strict cost & thermal requirements SOLUTION: Low profile, active heat sink solution met target price and thermal performance ENERGY TELECOM CHALLENGE: Solution needed for cooling 4 ASICs in line with power exceeding 120W for a ducted application SOLUTION: Compact zipper fin, copper & aluminum heat sink, eliminating the need for a heat pipe and large heat sink LED CHALLENGE: Aesthetically pleasing, cost-effective cooling solution needed for canopy lighting fixture with LED case temp below 85°C for increased lumen output of 12,000lm SOLUTION: One piece, cast aluminium shroud & heat sink with optimized vents and power supply placement with an upgrade in LED power input of 110W CHALLENGE: Air cooling solution needed for an oil drilling application with 128W of dissipation & two 48W ASICs operating in a harsh environment SOLUTION: Novel designed PCB level heat sink used as a shield for the board and a cooling solution using the superGRIP attachment to hold the heat sink on the PCB SECURITY SURVEILLANCE CHALLENGE: Cooling solution needed for a defense camera application, with required internal temperature of 49°C in a desert environment with full solar load SOLUTION: Heat sink, fan & TEC integrated into the enclosure enabling the system to operate successfully in a 58°C environment For more information, call 781.769.2800, email [email protected] or visit qats.com 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 F: 781.769.9979 | WWW.QATS.COM R0_0415