HI-TEMP FAN HEAT SINK – FHP Series High Operating Temperature Integrated Fan Heat Sinks DESIGN FEATURES ■ Industry-leading maximum operating temperature of 90°C ■ Compatible with chipset footprints ranging from 27x27 mm to 40x40 mm ■ Common 5VDC @ 0.5 A (max) USB 2.0 fan electrical specifications ■ Pin fin heat sink DESCRIPTION The FHP series of integrated-fan heat sinks is uniquely designed to absorb and disperse heat away from high temperature devices while offering key features such as an operating temperature range of -10°C to 90°C, calculated MTTF @ 90°C: 86,858 hours (GEM, 90% confidence) and low profile to fit applications with space constraints. Thermal resistance values range from 3.35°C/W to as low as 1.95°C/W. CTS’ series of hi-temp fansinks maintain superior thermal dissipation for devices that emit high amount of heat. Our fansinks are available a wide range of footprints and fin heights which make them suitable for many elevated temperature applications such as component testing, burn-in, high density servers, high- speed computing and video, and use in areas where the system airflow is constrained. Part Number Length x Width x Height (mm) FHP27-27-20 27 x 27 x 20.0 / 34.1 x 29.6 x 20.0 +/- 0.5 mm (with clip) Thermal Resistance (R TH ) 3.35 PACKAGE North Americas: +1-800-982-5737 • International: +1-508-435-6831 • Asia: +65-655-17551 • [email protected] Specifications are subject to change without notice. 1 RevB1014 FHP27-27-20 ORDERING INFORMATION F Series HP Code HP Clip Mount (only) 27-27-20 Fin Type Pin or /Txxx Dimensions in mm (L x W x H) Thermal Tape (only) Code Specifications Code Specifications /S Short /A01 CTS Double-sided Kapton® /M Medium /T410 /T411 or /T412 Chomerics Thermattach® /T Tall /A21 3M™ 8815 Both (Thermal Tape and Clip Mount Options) /Tape code/Clip code Example: The above fansink with T710 and tall clip is FHP27-27-20/T710/T North Americas: +1-800-982-5737 • International: +1-508-435-6831 • Asia: +65-655-17551 • [email protected] Specifications are subject to change without notice. 2 RevB1014