A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Package Dimension: Part NO. Chip Emitting Color Lens Color AL-01CEUV3WC-3A2 InGaN UV Water Clear Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm (.010”) unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04”) max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. 6. This data-sheet only valid for six months. Part No. AL-01CEUV3WC-3A2 Spec No. 245 Page 1 of 7 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Absolute Maximum Ratings at Ta=25℃ Parameter Symbol MAX. Unit DC Forward Current IF 700 mA Reverse Voltage VR 5 V Power Disspation PD 2.48 W Pulse Forward Current IFP 1000 mA LED junction Temperature (at 350mA) Tj 125 ℃ Thermal Resistance Rth 10 K/W Operating Temperature Range Topr -40℃ to +100 ℃ Storage Temperature Range Tstg -40℃ to +100 ℃ Manual Soldering Time at 260℃ (Max.) Tsol 5 seconds Part No. AL-01CEUV3WC-3A2 Spec No. 245 Page 2 of 7 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Electrical Optical Characteristics at Ta=25℃ Parameter Power Consumption BIN Min. Typ. Max. S10 620 --- 660 S11 660 --- 700 700 --- 740 S13 740 --- 780 S14 780 --- 820 S12 Symbol Radiometric Power Unit Test Condition mW IF=500mA Forward Voltage VF 3 --- 4 V IF=500mA Peak Wavelength λp 400 --- 410 nm IF=500mA Spectra Half Widh ∆λ 12 --- 25 nm IF=500mA Reverse Current IR --- --- 2 µA IF=500mA Emission Angle 2θ1/2 --- 120 --- Deg IF=500mA Part No. AL-01CEUV3WC-3A2 Spec No. 245 Page 3 of 7 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Forward Voltage Binning Part No. AL-01CEUV3WC-3A2 Spec No. 245 Page 4 of 7 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Characteristics Curves Part No. TJ=25℃ AL-01CEUV3WC-3A2 Spec No. 245 Page 5 of 7 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Characteristics Curves Part No. TJ=25℃ AL-01CEUV3WC-3A2 Spec No. 245 Page 6 of 7 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Part No. AL-01CEUV3WC-3A2 Spec No. 245 Page 7 of 7