IM-10RFCM-13 www.vishay.com Vishay Dale Inductors, Commercial, Molded, Axial Leaded FEATURES • Inductance range is 1 μH to 2200 μH • Proven reliability molded inductors ELECTRICAL SPECIFICATIONS Inductance Tolerance: ± 10 % on Q-Meter for 1 μH to 22 μH. ± 5 % 1000 cps bridge for 27 μH to 2200 μH Note • L and Q are not always tested at the same frequency. Inductance values tested on Q-Meter, are tested at standard test frequencies. Dielectric Strength: 700 VRMS at sea level Operating Temperature: - 55 °C to + 125 °C Self-Resonant Frequency: Minimum SRF measured with full length leads on Grid-Dip Meter Q: Measured on Q-Meter Rating: 1/3 watt dissipation for M Models • Material categorization: For definitions of compliance www.vishay.com/doc?99912 please see DENSITY SPECIFICATIONS Weight: 2 g maximum ENVIRONMENTAL SPECIFICATIONS Moisture: Meets requirements of MIL-PRF-15305 Shock Resistance: Meets requirements of MIL-PRF-15305 Vibration: High frequency, 10 Hz to 2000 Hz at 20 g ± 10 % maximum for 12 logarithmic swings, each of 20 minduration repeated for each of three mutually perpendicular planes. MECHANICAL SPECIFICATIONS Terminal Strength: Meets 5 pound pull test when tested per MIL-PRF-15305 DIMENSIONS in inches [millimeters] 0.250 [6.35] Dia. Max. 1.30 [33.02] Typ. Min. #21 0.028 ± 0.002 [0.71 ± 0.051] TCW 0.600 [15.24] Max. STANDARD ELECTRICAL SPECIFICATIONS IND. (μH) TOL. (%) Q MIN. TEST FREQ. (MHz) SRF MIN. (MHz) DCR MAX. () RATED DC CURRENT (1) (mA) IM-10RFCM-13 1.0 ± 10 100 15 136 0.04 2700 IM-10RFCM-13 1.2 ± 10 100 15 124 0.04 2700 IM-10RFCM-13 1.5 ± 10 100 10 112 0.04 2700 IM-10RFCM-13 1.8 ± 10 95 10 100 0.05 2500 IM-10RFCM-13 2.2 ± 10 95 10 88 0.05 2500 IM-10RFCM-13 2.7 ± 10 68 7.9 76 0.05 2500 IM-10RFCM-13 3.3 ± 10 60 7.9 72 0.05 2500 IM-10RFCM-13 3.9 ± 10 60 7.9 70 0.07 2100 IM-10RFCM-13 4.7 ± 10 60 7.9 60 0.09 1800 IM-10RFCM-13 5.6 ± 10 65 7.9 56 0.14 1550 IM-10RFCM-13 6.8 ± 10 70 7.9 52 0.17 1300 IM-10RFCM-13 8.2 ± 10 65 7.9 46 0.25 1150 IM-10RFCM-13 10 ± 10 65 5 40 0.32 1000 IM-10RFCM-13 12 ± 10 65 5 36 0.47 870 IRON CORE MODEL (1) Note (1) Model electricals and tolerances shown. Revision: 14-Aug-12 Document Number: 34037 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IM-10RFCM-13 www.vishay.com Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS TOL. (%) Q MIN. TEST FREQ. (MHz) SRF MIN. (MHz) DCR MAX. () IM-10RFCM-13 15 ± 10 75 4 32 0.62 730 IM-10RFCM-13 18 ± 10 65 4 30 0.72 660 IM-10RFCM-13 22 ± 10 65 2.5 28 0.80 600 IM-10RFCM-13 27 ±5 65 2.5 25 1.2 520 IM-10RFCM-13 33 ±5 80 2.5 22 1.5 450 IM-10RFCM-13 39 ±5 80 2.5 20 2.3 380 IM-10RFCM-13 47 ±5 100 2.5 19 3.0 300 IM-10RFCM-13 56 ±5 100 2.5 18 4.2 270 IM-10RFCM-13 68 ±5 100 2.5 16 5.2 250 IM-10RFCM-13 82 ±5 100 2.5 14 6.2 220 IM-10RFCM-13 100 ±5 100 1.5 13 7.0 200 IM-10RFCM-13 120 ±5 95 1.5 11 7.5 200 IM-10RFCM-13 150 ±5 90 1 9 8 190 IM-10RFCM-13 180 ±5 85 1 7 9 185 IM-10RFCM-13 220 ±5 85 1 5.5 10 180 IM-10RFCM-13 270 ±5 80 1 4.5 11 172 IM-10RFCM-13 330 ±5 80 0.80 3.5 12 165 IM-10RFCM-13 390 ±5 75 0.80 3.0 13 157 IM-10RFCM-13 470 ±5 75 0.80 2.8 14 150 IM-10RFCM-13 560 ±5 65 0.80 2.5 16 145 IM-10RFCM-13 680 ±5 65 0.80 2.2 17 140 IM-10RFCM-13 820 ±5 65 0.80 2.0 19 132 IM-10RFCM-13 1000 ±5 70 0.80 1.8 21 125 IM-10RFCM-13 1200 ±5 60 0.25 2.2 22 120 IM-10RFCM-13 220 ±5 70 0.25 1.6 30 100 IRON CORE RATED DC CURRENT (1) (mA) IND. (μH) MODEL (1) Note Model electricals and tolerances shown. (1) MARKING - Color coded ORDERING INFORMATION IM-10RFCM-13 1.0 μH 10 % EZ e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD R K GLOBAL PART NUMBER I M 1 0 R MODEL Revision: 14-Aug-12 F C M E Z PACKAGE CODE 1 INDUCTANCE VALUE 0 INDUCTANCE TOLERANCE 1 3 SERIES Document Number: 34037 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000