LPE-6562 www.vishay.com Vishay Dale Surface Mount Transformers/Inductors, Gapped and Ungapped, Custom Configurations Available FEATURES • Material categorization: for definitions of compliance www.vishay.com/doc?99912 please see ELECTRICAL SPECIFICATIONS (multiple winds are connected in parallel) Inductance Range: 10 μH to 330 000 μH, measured at 0.10 VRMS at 10 kHz without DC current, using an HP 4263A or HP 4284A impedance analyzer DC Resistance Range: 0.03 to 53.7 , measured at +25 °C ± 5 °C Rated Current Range: 3.00 A to 0.06 A Dielectric Withstanding Voltage: 500 VRMS, 60 Hz, 5 s STANDARD ELECTRICAL SPECIFICATIONS GAPPED MODELS (B) UNGAPPED MODELS (A) IND. IND. SCHEMATIC DCR MAX. MAX. RATED DC CURRENT SATURATING CURRENT MODEL (μH) TOL. LETTER () (A) (1) (A) (2) LPE6562ER221NU 220 ± 30 % A 0.28 0.90 N/A LPE6562ER331NU 330 ± 30 % A 0.34 0.81 N/A LPE6562ER471NU 470 ± 30 % A 0.40 0.74 N/A LPE6562ER681NU 680 ± 30 % A 0.48 0.67 N/A LPE6562ER102NU 1000 ± 30 % A 0.59 0.61 N/A LPE6562ER152NU 1500 ± 30 % A 0.72 0.55 N/A LPE6562ER222NU 2200 ± 30 % A 0.87 0.50 N/A LPE6562ER332NU 3300 ± 30 % A 1.07 0.45 N/A LPE6562ER472NU 4700 ± 30 % A 1.27 0.41 N/A LPE6562ER682NU 6800 ± 30 % A 1.53 0.38 N/A LPE6562ER103NU 10 000 ± 30 % A 1.86 0.34 N/A LPE6562ER153NU 15 000 ± 30 % A 2.27 0.31 N/A LPE6562ER223NU 22 000 ± 30 % A 8.67 0.16 N/A LPE6562ER333NU 33 000 ± 30 % A 10.6 0.14 N/A LPE6562ER473NU 47 000 ± 30 % A 12.7 0.13 N/A LPE6562ER683NU 68 000 ± 30 % A 15.2 0.12 N/A LPE6562ER104NU 100 000 ± 30 % A 18.5 0.11 N/A LPE6562ER154NU 150 000 ± 30 % A 37.7 0.08 N/A LPE6562ER224NU 220 000 ± 30 % A 45.6 0.07 N/A LPE6562ER334NU 330 000 ± 30 % A 53.7 0.06 N/A LPE6562ER100MG 10 ± 20 % B 0.03 3.09 5.055 LPE6562ER150MG 15 ± 20 % B 0.04 2.79 4.160 LPE6562ER220MG 22 ± 20 % B 0.05 2.26 3.460 LPE6562ER330MG 33 ± 20 % B 0.08 1.81 2.840 LPE6562ER470MG 47 ± 20 % D 0.12 1.48 2.390 LPE6562ER680MG 68 ± 20 % C 0.19 1.20 1.990 LPE6562ER101MG 100 ± 20 % D 0.29 0.98 1.650 LPE6562ER151MG 150 ± 20 % E 0.45 0.78 1.350 LPE6562ER221MG 220 ± 20 % E 0.54 0.71 1.115 LPE6562ER331MG 330 ± 20 % E 0.84 0.57 0.912 LPE6562ER471MG 470 ± 20 % E 1.24 0.47 0.765 LPE6562ER681MG 680 ± 20 % E 1.89 0.38 0.637 LPE6562ER102MG 1000 ± 20 % E 2.91 0.31 0.526 LPE6562ER152MG 1500 ± 20 % E 4.50 0.25 0.430 LPE6562ER222MG 2200 ± 20 % E 6.90 0.20 0.355 LPE6562ER332MG 3300 ± 20 % E 10.4 0.16 0.290 LPE6562ER472MG 4700 ± 20 % E 15.7 0.13 0.243 Notes (1) DC current that will create a maximum temperature rise of 30 °C when applied at +25 °C ambient. (2) DC current that will typically reduce the initial inductance by 20 %. • UNGAPPED MODELS: Highest possible inductance with the lowest DCR and highest Q capability. Beneficial in filter, impedance matching and line coupling devices. GAPPED MODELS: Capable of handling large amounts of DC current, tighter inductance tolerance with better temperature stability than ungapped models. Beneficial in DC/DC converters or other circuits carrying DC currents or requiring inductance stability over a temperature range. DESCRIPTION LPE 6562 MODEL SIZE 1000 μH INDUCTANCE VALUE ± 30 % INDUCTANCE TOLERANCE A CORE ER e2 PACKAGE CODE JEDEC® LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER L P E PRODUCT FAMILY 6 5 6 SIZE 2 E R PACKAGE CODE 1 0 2 INDUCTANCE VALUE N T TOL. CORE Note • Series is also available with SnPb terminations by using package code RY for tape and reel (in place of ER) or SM for bulk (in place of EB). Revision: 04-Dec-14 Document Number: 34066 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LPE-6562 www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] SCHEMATIC (top view) Schematic A 0.092 [2.34] Pad Dimensions Typical, 10 places Pad Layout 0.100 [2.54] 0.058 [1.47] Typical 4 places 0.545 [13.84] 0.603 [15.32] Reference Only Schematic B 5 6 5 6 5 7 4 7 4 7 4 8 3 9 2 10 1 8 3 8 3 9 2 9 2 1 1 10 10 Schematic D Schematic E 6 5 7 4 8 3 9 2 10 1 Dimensional Outline 6 5 10 0.606 [15.39] Max. 1 6 5 7 4 8 3 9 2 10 1 Note • Schematic A is for ungapped LPE series. 0.335 [8.51] Max. ENVIRONMENTAL PERFORMANCE 0.695 [17.65] Max. 0.575 [14.60] 0.100 [2.54] Typ. Schematic C 6 0.028 [0.71] 0.028 [0.71] Foot Print Diagram Notes • Pad layout guidelines per MIL-STD-275E (printed wiring for electronic equipment). • Tolerances: xx ± 0.01" [± 0.25 mm]; xxx ± 0.005" [± 0.12 mm]. • The underside of these components contains metal and thus should not come in contact with active circuit traces. TEST CONDITIONS Thermal Cycling Withstands -55 °C to +125 °C Operating Temperature -55 °C to +125 °C (1) High Humidity 85 % Soldering Heat Tested to +230 °C Mechanical Shock Per MIL-STD-202, method 213 (100G) Vibration Per MIL-STD-202, method 204 (20G) Solderability Per industry standards Note (1) Must be checked in end use application. PART MARKING - Vishay Dale - Date code - Marking code (suffix of model #) - Pin 1 indicator PACKAGING TAPE SPECIFICATIONS: Carrier Tape Type: Conductive Cover Tape Type: Anti-static Cover Tape Adhesion to Carrier: 40 g ± 30 g REEL SPECIFICATIONS: Diameter (flange): 13" [330.2 mm] Maximum Width (over flanges): 1.197" [30.4 mm] STANDARDS: All embossed carrier tape packaging will be accomplished in compliance with latest revision of EIA-481 “Taping of Surface Mount Components for Automatic Placement”. TAPE COMPONENT UNITS PER 13" MODEL WIDTH PITCH REEL LPE-6562 32 mm 20 mm 300 Tape and Reel Orientation Pin 1 Indicator Cover Tape Carrier Tape Embossed Cavity Label Area USER DIRECTION OF FEED Note • Top view shown with cover tape removed. Revision: 04-Dec-14 Document Number: 34066 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000