20 LHE www.vishay.com Vishay Sfernice Linear Position Sensor in Hall Effect Technology (0 mm to 10 mm max.) FEATURES • Accurate linearity down to: ± 1 % • Electrical strokes from 0 mm to 10 mm • Long life: Greater than 10M cycles • Non contacting technology: Hall effect • Model dedicated to all applications in harsh environments • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Sensor type Output type Market appliance Dimensions LINEAR, non contacting hall effect Wires Industrial 46 mm x 20.8 mm x 37 mm ELECTRICAL SPECIFICATIONS PARAMETER STANDARD Electrical stroke Linearity Supply voltage Supply current Output signal Over voltage protection Reverse voltage protection Load resistance recommanded Hysteresis Resolution Up to 10 mm ± 2 % or ± 1 % 5 VDC ± 10 % < 16 mA typical Analog ratiometric 10 % to 90 % of Vsupply or PWM 10 % to 90 % duty cycle +20 VDC -10 VDC Min. 1 k for analog output and PWM output Static: 0.1 % of Vsupply/Dynamic: 0.25 % of Vsupply 12 bits MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel Bearing type Standard Weight 12 mm max. Sleeve bearing For spring loaded model: IP 51/without spring: Other on request 26 g ± 4 g ORDERING INFORMATION/DESCRIPTION 20 LHE MODEL 1 A W A 1P30 xxxx e1 FEATURES LINEARITY OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST LEAD FINISH 1: Spring return 2: Without spring X: ± 2 % A: ± 1 % W: Wires Z: Custom A: Analog increasing B: Analog decreasing C: PWM increasing D: PWM decreasing 1: 3.175 mm 9: Special P: Plain T: Threaded M3 x 6 Z: Other type Shaft length from mounting face 30 mm when full extended SAP PART NUMBERING GUIDELINES 20 LHE MODEL Revision: 27-Mar-15 2 X Z C 1T35 xxxx FEATURES LINEARITY OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST Without spring return system ±2% “Custom” PWM increasing Document Number: 57115 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 20 LHE www.vishay.com Vishay Sfernice VOUT ANALOG Vout (% Vsupply) Vout (% Vsupply) Diagnostic High Area Diag High Level 90 % 10 % Diag Low Level Diagnostic High Area Diag High Level 90 % 10 % Diag Low Level Diagnostic Low Area 0 (Position) Diagnostic Low Area 0 (Position) Increasing “Code A” Decreasing “Code B” VOUT PWM Vout (% Vsupply) 90 % T high Duty Cycle = Thigh T T low 10 % 0 Time (µs) T: periodicity ENVIRONMENTAL SPECIFICATIONS Vibrations Shocks 20 g from 10 Hz to 2000 Hz 3 shocks/axis; 50 g half a sine 11 ms Operating temperature range -40 °C; +85 °C Life > 10M of cycles Speed (max.) Immunity to radiated electromagnetic disturbances Immunity to power frequency magnetic field Radiated electromagnetic emissions Electrostatic discharges Immunity to radiated RF field Revision: 27-Mar-15 60 mm/s 200 V/m 150 kHz/1 GHz IEC 62132-2 part 2 (level A) 200 A/m 50 Hz/60 Hz EN 61000-4-8 30 MHz/1 GHz < 30 dBμV/m EN 61000-6-4 Contact discharges: ± 4 kV Air discharges: ± 8 kV EN 61000-4-2 10 V/m 80 MHz to 1 GHz EN6100-4-3 Document Number: 57115 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 20 LHE www.vishay.com Vishay Sfernice ENVIRONMENTAL SPECIFICATIONS Materials Housing Thermoplastic housing Mounting type Flange with 2 holes Ø 4.5 mm Shaft Ø 3.175 mm (stainless steel) 3 lead wires (AWG 20) Length: 300 mm Output Centering diameter Ø 12 mm Spring force From 1.5 N to 7 N along stroke (typical) Note • Nothing stated herein shall be construed as a guarantee of quality or durability. DIMENSIONS in millimeters 2 x Ø 4.5 46 19 36 6.8 14 20.8 11.4 2.5 19 3 wires 300 mm Tol. gen.: ± 0.5 mm 37 max. 10 4 Ø 3.175 0- 0.013 Ø 12 0 - 0.1 Fully extended 30 Wire Revision: 27-Mar-15 YELLOW GND (-) RED SIGNAL GREEN Vcc (+) Document Number: 57115 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000