Model 631 HE Vishay Spectrol Single Turn Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) FEATURES • Accurate linearity down to: ± 0.5 % • All electrical angles available up to: 360° RoHS (no dead band) COMPLIANT • Long life: over 20M cycles • Non contacting technology: Hall effect • Model dedicated to all applications in harsh environments • Robust tool machined aluminum housing • Compliant to RoHS directive 2002/95/EC ELECTRICAL SPECIFICATIONS PARAMETER Electrical Angle STANDARD SPECIAL 90°, 180°, 270°, 360° Any other angle upon request Linearity ±1% ± 0.5 % 5 VDC ± 10 % Other upon request 10 mA typical 16 mA for PWM output Analog ratiometric 10 % to 90 % of Vsupply or PWM 10 % to 90 % duty cycle Other upon request Supply Voltage Supply Current Output Signal Over Voltage Protection + 20 VDC Reverse Voltage Protection - 10 VDC Load Resistance Recommanded Min. 1 kΩ for analog output and PWM output Hysteresis < 0.2 % MECHANICAL SPECIFICATIONS PARAMETER Mechanical Travel 360° continuous Bearing Type Sleeve bearing Ball bearing upon request Standard IP 50; other on request Weight 20 g ± 2 g ORDERING INFORMATION/DESCRIPTION 631HE 0 A 1 ELECTRICAL MODEL FEATURES LINEARITY ANGLE 0: Continuous rotation and antirotation pin 1: Continuous rotation and no antirotation pin A: ± 1 % B: ± 0.5 % W A 1S22 XXXX OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST 0: 6 mm W: Wires A: Analog CW 1: 90° Z: Custom B: Analog CCW 1: 6.35 mm 2: 180° 3: 270° C: PWM CW 2: 3.175 mm 4: 360° 9: Special D: PWM CCW 9: Other angles P: Plain Z: Other output S: Slotted Z: Other type BO 10 e1 PACKAGING LEAD FINISH Box of 10 pieces Shaft length from mounting face 22 mm to 72 mm max. per step of 5 mm SAP PART NUMBERING GUIDELINES 631HE 1 B 9 Z C 0P27 XXXX MODEL MECHANICAL FEATURES LINEARITY ELECTRICAL ANGLE OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST www.vishay.com 166 For technical questions, contact: [email protected] Document Number: 57100 Revision: 12-Apr-10 Model 631 HE Single Turn Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) Vishay Spectrol VOUT ANALOG Operating Temperature 85 °C 125 °C Diagnostic High Level 96 % min. 96 % min. Diagnostic Low Level 2 % max. 4 % max. Vout (% Vsupply) Vout (% Vsupply) Diagnostic High Area Diag High Level 90 % Diagnostic High Area Diag High Level 90 % CCW CW 10 % Diag Low Level 10 % Diag Low Level Diagnostic Low Area 0 Theta (Position) Diagnostic Low Area 0 Theta (Position) VOUT PWM Vout (% Vsupply) CW 97 % min. T high Duty Cycle = Thigh T T low 1.5 % max. 0 Time (µs) T: periodicity Document Number: 57100 Revision: 12-Apr-10 For technical questions, contact: [email protected] www.vishay.com 167 Model 631 HE Single Turn Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) Vishay Spectrol DIAGNOSTIC MODES Vout Analog Rpull-up Vout Analog Rpull-down Vout PWM Rpull-up = 1 kΩ Vpull-up = Vsupply = 5 V 1: Broken GND Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation 2: Broken Vout Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation 3: Broken Vsupply Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation Over Voltage Vsupply > 7 V Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation Under Voltage Vsupply < 2.7 V Diagnostic high area Diagnostic low area > 97 % Vsupply without modulation FAILURE Vpull-up Vsupply 3 Rpull-up Vpull-up can be independent to Vsupply Sensor 2 GND Vout 1 Cut off ENVIRONMENTAL SPECIFICATIONS 20 g from 10 Hz to 2000 Hz Vibrations 3 shocks/axis; 50 g half a sine 11 ms Shocks Operating Temperature Range - 45 °C; + 125 °C Life 20M of cycles Rotational Speed (Max.) 120 RPM Immunity to Radiated Electromagnetic Disturbances 200 V/m 150 kHz/1 GHz Immunity to Power Frequency Magnetic Field Radiated Electromagnetic Emissions Electrostatic Discharges 200 A/m 50 Hz/60 Hz 30 MHz/1 GHz < 30 dB µV/m Contact discharges: ± 4 kV Air discharges: ± 8 kV Materials Housing Aluminum anodized Shaft Stainless steel Output 3 lead wires Bushing Mount Hardware Lockwasher Internal Tooth Steel nickel plated Panel Nut Brass nickel plated www.vishay.com 168 For technical questions, contact: [email protected] Document Number: 57100 Revision: 12-Apr-10 Model 631 HE Single Turn Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) Vishay Spectrol DIMENSIONS in millimeters 3 WIRES AWG 20 LG = 300 mm 8 3/ Ø 9.52 x 0.79 Ø 8 max. 0.8 ± 0.2 (1) 0 (2) Ø 6.35 -0.036 Ø 22.2 ± 0.13 - 32 NEF-2A Ø 9.52 ± 0.1 1 ± 0.2 (1) 7 MIN. 22.2 ± 0.8 16.5 ± 0.4 CW OR CCW ACCORDING TO OUTPUT MODE CHOICE Vsupply = GREEN WIRE Gnd = YELLOW WIRE Vout = RED WIRE VIEWED FROM SHAFT Dimensions in millimeter Delivered with nut and washer Notes (1) For version slotted shaft (2) For shaft type “1“ MARKING Unit Identification Document Number: 57100 Revision: 12-Apr-10 Manufacturer’s name and complete sap part reference, date code, and wiring correspondance: colors versus connections. For technical questions, contact: [email protected] www.vishay.com 169 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1