IM-10RFCL-12 Vishay Dale Inductors, Commercial, Molded, Axial Leaded FEATURES • Miniature shielded inductor • High inductance-to-size ratio • Inductance range is 0.10 μH to 180 000 μH ELECTRICAL SPECIFICATIONS • Encapsulated non-flammable shielded unit Inductance Tolerance: ± 10 % on Q-meter for 1 μH to 22 μH ± 5 % 1000 cps bridge for 27 μH to 10 000 μH Note • L and Q are not always tested at the same frequency. Inductance values tested on Q-meter, are tested at standard test frequencies. • 0.164" [4.17 mm] diameter by 0.450" [11.43 mm] long envelope • Offers extremely high inductance for density packaging • Compliant to RoHS directive 2002/95/EC Dielectric Strength: 700 VRMS at sea level DENSITY SPECIFICATIONS Operating Temperature: - 55 °C to + 125 °C Weight: 4.1 g maximum Self-Resonant Frequency: Minimum SRF measured with full length leads on grid-dip meter ENVIRONMENTAL SPECIFICATIONS Q: Measured on a Q-meter Moisture Resistance: Meets requirements of MIL-PRF-15305 Rating: 1/ 2 Shock Resistance: Meets requirements of MIL-PRF-15305 W dissipation for L models MECHANICAL SPECIFICATIONS Terminal Strength: Meets 5 lb pull test when tested per MIL-PRF-15305 (latest revision) Vibration: High frequency, 10 Hz to 2000 Hz at 20 G ± 10 % maximum for 12 logarythmic swings, each of 20 min duration repeated for each of three mutually perpendicular planes DIMENSIONS in inches [millimeters] 0.310 [7.87] Dia. Max. 1.30 [33.02] Typ. Min. # 21 0.0285 ± 0.002 [0.724 ± 0.051] TCW 0.900 [22.86] Max. IND. TOL. MODEL (1) (μH) (%) IM-10RFCL-12 1.0 ± 10 IM-10RFCL-12 1.2 ± 10 IM-10RFCL-12 1.5 ± 10 IM-10RFCL-12 1.8 ± 10 IM-10RFCL-12 2.2 ± 10 IM-10RFCL-12 2.7 ± 10 IM-10RFCL-12 3.3 ± 10 IM-10RFCL-12 3.9 ± 10 IM-10RFCL-12 4.7 ± 10 IM-10RFCL-12 5.6 ± 10 IM-10RFCL-12 6.8 ± 10 IM-10RFCL-12 8.2 ± 10 IM-10RFCL-12 10 ± 10 IM-10RFCL-12 12 ± 10 IM-10RFCL-12 15 ± 10 IM-10RFCL-12 18 ± 10 IM-10RFCL-12 22 ± 10 Note (1) Model electricals and tolerances shown Document Number: 34036 Revision: 15-Jul-09 Q MIN. 130 130 130 130 130 100 100 80 75 65 65 65 75 75 75 75 75 TEST FREQUENCY Q (MHz) 15 15 10 10 10 10 7.9 7.9 7.9 7.9 7.9 7.9 5.0 5.0 5.0 5.0 2.5 SRF MIN. (MHz) 136 124 112 100 92 82 72 68 64 58 52 46 40 36 32 29 26 DCR MAX. (Ω) 0.03 0.03 0.03 0.03 0.04 0.04 0.04 0.05 0.05 0.06 0.06 0.11 0.15 0.23 0.3 0.4 0.5 For technical questions, contact: [email protected] RATED DC CURRENT (mA) 4000 4000 4000 4000 3500 3500 3500 3100 3100 3000 3000 2400 1800 1600 1300 1150 1000 IRON CORE STANDARD ELECTRICAL SPECIFICATIONS www.vishay.com 23 IM-10RFCL-12 Inductors, Commercial, Molded, Axial Leaded Vishay Dale IND. TOL. MODEL (1) (μH) (%) IM-10RFCL-12 27 ±5 IM-10RFCL-12 33 ±5 IM-10RFCL-12 39 ±5 IM-10RFCL-12 47 ±5 IM-10RFCL-12 56 ±5 IM-10RFCL-12 68 ±5 IM-10RFCL-12 82 ±5 IM-10RFCL-12 100 ±5 IM-10RFCL-12 120 ±5 IM-10RFCL-12 150 ±5 IM-10RFCL-12 180 ±5 IM-10RFCL-12 220 ±5 IM-10RFCL-12 270 ±5 IM-10RFCL-12 330 ±5 IM-10RFCL-12 390 ±5 IM-10RFCL-12 470 ±5 IM-10RFCL-12 560 ±5 IM-10RFCL-12 680 ±5 IM-10RFCL-12 820 ±5 IM-10RFCL-12 1000 ±5 IM-10RFCL-12 1200 ±5 IM-10RFCL-12 1500 ±5 IM-10RFCL-12 1800 ±5 IM-10RFCL-12 2200 ±5 IM-10RFCL-12 2700 ±5 IM-10RFCL-12 3300 ±5 IM-10RFCL-12 3900 ±5 IM-10RFCL-12 4700 ±5 IM-10RFCL-12 5600 ±5 IM-10RFCL-12 6800 ±5 IM-10RFCL-12 8200 ±5 IM-10RFCL-12 10 000 ±5 Note (1) Model electricals and tolerances shown Q MIN. 70 70 70 75 80 100 100 100 100 100 95 95 70 65 65 60 75 75 75 75 75 75 65 65 65 65 65 65 65 65 65 65 TEST FREQUENCY Q (MHz) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.5 1.5 1.0 1.0 1.0 1.0 0.79 0.79 0.79 0.50 0.50 0.50 0.50 0.50 0.40 0.40 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.15 SRF MIN. (MHz) 24 22 21 20 18 16 14 13 12 11 10 9 7 6 5 4 3 2.50 2.00 1.90 1.70 1.50 1.40 1.20 1.00 0.95 0.80 0.75 0.70 0.60 0.50 0.45 DCR MAX. (Ω) 0.6 0.7 1.1 1.3 1.8 2.4 2.8 3.2 4.8 6.4 9.5 12 13 14 15.5 17 18.5 20 22 24 27 29 32 35 40 45 49 53 60 67 75 80 RATED DC CURRENT (mA) 900 850 720 620 540 450 425 400 360 280 240 200 195 190 180 170 165 155 150 145 137 130 125 120 112 105 100 95 90 85 82 80 IRON CORE STANDARD ELECTRICAL SPECIFICATIONS MARKING - Color coded ORDERING INFORMATION IM-10RFCL-12 1.0 μH 10 % EZ e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD R K GLOBAL PART NUMBER I M 1 0 R MODEL www.vishay.com 24 F C L E Z PACKAGE CODE 1 INDUCTANCE VALUE For technical questions, contact: [email protected] 0 INDUCTANCE TOLERANCE 1 2 SERIES Document Number: 34036 Revision: 15-Jul-09 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000