V I S H AY I N T E R T E C H N O L O G Y, I N C . THIN FILM CHIP RESISTORS Resistors – High-Temperature AEC-Q200 Qualified PAT T Series Precision Automotive High-Temperature (155 °C at Full Rated Power) Thin Film Chip Resistor, AEC-Q200 Qualified KEY BENEFITS • W ide operating temperature range of -55 °C to 155 °C at 100 % rated power, derated to 25 % of rated power at 230 °C • Absolute TCR of ± 25 ppm/°C • Tolerances to ± 0.1 % • 2.75 Ω to 301 kΩ resistance range • Very low noise coefficient of < –30 dB • Voltage coefficient of 0.1 ppm/V • 75 V to 100 V voltage range APPLICATIONS • High-temperature automotive applications, under the hood applications PATT • High-precision oil/gas exploration • Telecommunications PATT Vishay Dale Thin Film • Industrial applications PATT Vishay Dale Thin Film gh Temperature (155 °C at full PATT Vishay RESOURCES Dale Thin Film p Resistor,(155 AEC-Q200 Qualified mperature °C at full •Film Datasheet: PATT - www.vishay.com/doc?60124 Vishay Dale Thin sistor, AEC-Q200 Qualified atureFEATURES (155 °C at •full For technical questions contact [email protected] •°C Resistance range: 2.75 Ω to 120 kΩ AEC-Q200 Qualified (155 at full EATURES • Material categorization: For definitions of compliance please see • AEC-Q200 qualified, table 7F Resistance range: 2.75 Ω to 120 kΩ www.vishay.com/doc?99912 -Q200 Qualified S • AEC-Q200 qualified, ESD rated class 1C (2 kV) AEC-Q200 qualified, table 7F e range: •2.75 Ω to 120 kΩto any value Laser trimmed AEC-Q200 qualified, ESD rated class 1C (2 kV) qualified, table 7Fmoisture protected resistor element • Intrinsic 75 Ω to 120 kΩto any value Laser trimmed qualified, ESD rated class 1C (2 kV) • Moisture resistant to MIL-STD-202, method 106 One of the World’s Largest Manufacturers of hntrinsic table 7Fmoisture protected resistor element Discrete Semiconductors and Passive Components med to any value • Tantalum nitride resistor film on alumina h ESD rated class 1C (2 kV) Moisture resistant to MIL-STD-202, method 106 substrate oisture protected resistor element yTantalum value nitride resistor film on alumina • 100 % PRODUCT visual inspected per MIL-PRF-55342 esistant to MIL-STD-202, method 106 1/2 SHEET VMN-PT0380-1401 substrate otected resistor element Laser-trimmed tolerances nitride • resistor film on aluminato ± 0.1 % 100 % visual inspected per MIL-PRF-55342 MIL-STD-202, method 106 • Load life stability 0.2 %ISatSUBJECT 1000 h at °C and 100 % NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO THIS DOCUMENT TO155 CHANGE WITHOUT Laser-trimmed tolerances esistor film onpower aluminato ± 0.1 % rated ual inspected per MIL-PRF-55342 SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Load life• stability 0.2 % at 1000 h at coefficient 155 °C and 100 % Very low and voltage med tolerances to ±noise 0.1 % rated power V I S H AY I N T E R T E C H N O L O G Y, I N C . THIN FILM CHIP RESISTORS PAT T Series PATT Vishay Dale Thin Film Precision Automotive High-Temperature (155 °C at Full Rated Power) Thin Film Chip Precision Automotive High Temperature (155Resistor, °C at full AEC-Q200 Qualified rated power) Thin Film Chip Resistor, AEC-Q200 Qualified FEATURES • Resistance range: 2.75 to 301 k • AEC-Q200 qualified, table 7F • AEC-Q200 qualified, ESD rated class 1C (< 1 k: 1 kV; > 1 k: 2 kV) • Laser trimmed to any value • Intrinsic moisture protected resistor element • Moisture resistant to MIL-STD-202, method 106 • • • • Tantalum nitride resistor film on alumina substrate 100 % visual inspected per MIL-PRF-55342 Laser-trimmed tolerances to ± 0.1 % Load life stability 0.2 % at 1000 h at 155 °C and 100 % rated power • Very low noise and voltage coefficient (< - 30 dB, < 0.1 ppm/V) • Sulfur resistant (per ASTM B809-95 humid vapor test) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 The terminations consist of an adhesion layer, a leach resistant nickel barrier and gold plating compatible with high temperature solder systems. CONSTRUCTION Passivation Tantalum Nitride Resistive Film Gold Nickel Barrier TYPICAL PERFORMANCE High Purity Alumina Substrate Adhesion Layer ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Tantalum nitride - Resistance Range 2.75 to 301 k - ± 25 ppm/°C to ± 100 ppm/°C - 55 °C to + 175 °C TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient ± 0.1 % to ± 1.0 % + 25 °C ± 0.2 % 1000 h at 155 °C and 100 % rated power Not applicable - Less than 0.1 ppm/V - 75 V - Operating Temperature Range - 55 °C to + 250 °C - Storage Temperature Range (1) - 55 °C to + 250 °C - Noise < - 30 dB - Shelf Life Stability: Absolute 100 ppm 1 year at 25 °C Working Voltage Revision 8-Jan-14 Resistors – High-Temperature AEC-Q200 Qualified www.vishay.com Note (1) Storage temperature rating is for device only. COMPONENT RATINGS POWER RATING (mW) WORKING VOLTAGE (V) 0603 CASE SIZE 150 75 RESISTANCE RANGE () 2.75 to 120K 0805 200 100 2.75 to 301K Revision: 08-Jan-14 Document Number: 60124 1 For technical questions, contact: [email protected] PRODUCT THIS SHEET 2/2 THE PRODUCTS DESCRIBED HEREIN AND THISVMN-PT0380-1401 DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000