Optoway SPS-4340RW-CXX0G 1 *********************************************************************************************************************************************************************** SPS-4340RW-CXX0G (RoHS Compliant) 6.144 Gbps / CWDM / 40 km Digital Diagnostic Multi-Rate CPRI SM SFP+ *********************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l The SPS-4340RW-CXX0G s series is a 1 to 6.25 Gb/s single-mode transceiver module for serial optical communication applications for a radio base station system. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eighteen center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. A guaranteed minimum optical link budget of 16 dB is offered. The transmitter section uses a CWDM multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. l l l l l l l l CPRI / OBSAI Compatible Optical Interface 1 G to 6.25 G Multi-rate Specification Complaint to SFP+ MSA 18 Wavelength (λ): 1270 nm to 1610 nm CWDM DFB LD Transmitter Distance up to 40 km Power Budget > 16 dB SFF-8472 Digital Diagnostic Function AC/AC Coupling according to MSA Single +3.3 V Power Supply RoHS 6/6 Compliant 0 to 70oC Operating Class 1 Laser International Safety Standard IEC-60825 Compliant APPLICATIONS l Radio Base Station l OBSAI rates 6.144 Gb/s, 3.072 Gb/s, and 1.563 Gb/s l CPRI rates 4.9152 Gb/s, 2.4576 Gb/s, and 1.2288 Gb/s LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. SPS-4340RW-CXX0G Bit Rate (Gb/s) Power Budget (dB) Wavelength (nm) Package Temp. (oC) RoHS Compliant 1 to 6.25 > 16 CWDM* SFP+ with DMI 0 to 70 Yes CWDM* Wavelength (0 to 70oC) Central Wavelength -C270 -C290 -C310 -C330 -C350 -C370 -C390 -C410 -C430 Min. (nm) 1264.5 1284.5 1304.5 1324.5 1344.5 1364.5 1384.5 1404.5 1424.5 Typ. (nm) 1270 1290 1310 1330 1350 1370 1390 1410 1430 Max. (nm) 1277.5 1297.5 1317.5 1337.5 1357.5 1377.5 1397.5 1417.5 1437.5 Central Clasp Color Code Wavelength Light Purple -C450 Sky Blue -C470 Yellow Green -C490 Yellow Ocher -C510 Pink -C530 Beige -C550 White -C570 Silver -C590 Black -C610 Min. (nm) 1444.5 1464.5 1484.5 1504.5 1524.5 1544.5 1564.5 1584.5 1604.5 Typ. (nm) 1450 1470 1490 1510 1530 1550 1570 1590 1610 Max. (nm) 1457.5 1477.5 1497.5 1517.5 1537.5 1557.5 1577.5 1597.5 1617.5 Clasp Color Code Yellow Orange Gray Violet Blue Green Yellow Orange Red Brown CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2010/9/1 V2.0 Optoway SPS-4340RW-CXX0G 2 *********************************************************************************************************************************************************************** Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Power Supply Voltage Symbol Tstg Topr Vcc Min -40 0 -0.5 Max 85 70 3.6 Units o C o C V Notes Min 3.13 0 Typ 3.3 Max 3.47 70 350 6.25 Units / Notes V o C mA Gb/s Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Power Supply Current Data Rate Symbol Vcc Topr ICC (TX+RX) 300 1 Transmitter Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Output Center Wavelength Output Spectrum Width Extinction Ratio Side Mode Suppression Ratio Relative Intensity Noise Average Launch Power of OFF Transmitter Symbol Po, AVG λ ∆λ ER SMSR RIN Min 1 λc –5.5 --3.5 30 Typ λc Max 4 λc +7.5 1 -128 -30 Units dBm nm nm dB dB dB/Hz dBm Notes 1 2 -20 dB width 1. Output power is power coupled into a 9/125 µm single-mode fiber. 2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm. Receiver Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Sensitivity Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Symbol Min Typ P MAX LOSD LOSA λc 0.5 ---30 1260 ------- Max -15 -16 --1620 Units dBm dBm dBm dBm nm Max Units 6.25 700 Gb/s Ω mVpp Gb/s Ω mVpp Vcc+0.3 0.8 Vcc 0.5 V V V V Notes 3 Transition: low to high Transition: high to low 3. Measured with average power; BER < 10-12 and PRBS 2 7-1. Electrical Characteristics Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Min Typ 1 100 150 1 350 2.0 GND 2.4 GND 1200 6.25 100 600 Notes Internally AC coupled Internally AC coupled ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 20010/9/1 V2.0 Optoway SPS-4340RW-CXX0G 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN Signal Name 1 2 VEET TX_Fault 3 TX_Disable 4 SDA 5 SDL 6 7 MOD-ABS RS0 8 9 RX_LOS RS1 10 VEER Description PIN Signal Name Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = Laser off, Logic “0” = Laser on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Definition 0 – Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground Description 11 12 VEER RD- Receiver Signal Ground Inverse Receiver Data Out 13 RD+ Receiver Data Out 14 VEER Receiver Signal Ground 15 VCCR Receiver Power – 3.3V±5% 16 17 VCCT VEET Transmitter Power – 3.3V±5% Transmitter Signal Ground 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 20 VEET Transmitter Signal Ground MODULE DEFINITION Module Definition PIN 4 PIN 5 PIN 6 Interpretation by Host 4 SDA SCL MOD-ABS Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 20010/9/1 V2.0 Optoway SPS-4340RW-CXX0G 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT ( 1,17,20) 3 Tx_DISABLE 2 Tx_FAULT 10 KΩ TD + LD Driver 18 TD + Z=50Ω 100Ω TD - 19 TD Z=50Ω Vcc T 4 .7 μH 16 Vcc 3.3V 0.1μF 22 μF 0.1μF SerDes IC 0.1μF Vcc R 15 0.1μF RD - 22 μF 4 .7 μH 12 Protocol IC RD Z=50Ω 100Ω POST Amp RD + 13 RD + Z=50Ω depending on SERDES 10 KΩ LOS Vee R 30K Ω 8 RS1 9 RS0 7 30K Ω MOD_ABS EEPROM SCL SDA SFP+ module LOSS OF SINGAL ( 10,11,14) TX Rate Select RX Rate Select 6 MODU LE DETECT 5 SCL 4 SDA 10 KΩ 10 KΩ 10 KΩ Vcc 3.3V PACKAGE DIAGRAM Units in mm ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 20010/9/1 V2.0 Optoway SPS-4340RW-CXX0G 5 *********************************************************************************************************************************************************************** REVISION HISTORY Version 1.0 2.0 Subject Initial datasheet Extend data rate from 1 Gb/s to 6.25Gb/s Release Date 2009/7/1 2010/9/1 Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 20010/9/1 V2.0