MINIATURE PAINT INSULATED CARBON FILM FIXED RESISTORS Model No. NAT ■Constructions and Dimensions 3 2 4 5 7 6 d 1 D L ■Feature ① ② ③ ・"NAT" is the miniaturized carbon film resistor. ・Automatical insertion with 5 mm picth for high density assembly is available. (1/4W) lead wire insulation coat color code ・Body color : Brown ④ ⑤ ⑥ herical cutting groove conductive film ceramic base ⑦ cap Dimensions(mm) Type L D d NAT1/4 3.4 max. 1.8±0.2 0.45±0.05 NAT1/2 6.3±0.5 2.4±0.2 0.60±0.05 ■Type Designation Ex)NAT1/4 102 JTU NAT Type MINIATURE PAINT INSULATED CARBON FILM FIXED RESISTORS 1/4 102 J Power Rating Resistance Tolerance Forming, Packaging 1/4:0.25W 102:1kΩ G:±2.0% TU:52mm Axial Taping 1/2:0.5W E-24 series J:±5.0% TP:26mm Axial Taping TU RP:Radial Taping ※Please refer to General Specifications. ※Please refer to General Specifications. ■Power Rating Dielectric withstanding Voltage Type [W] [V] [V] G J NAT1/4 0.25 P・R 300 10~100k 2.2~100k NAT1/2 0.5 P・R 400 10~100k 1.0~100k Rated Voltage Rated Ambient Temp. T.C.R. [ppm/℃] Resistance Range [Ω] Power Rating ~1kΩ ±350 1.1k~47kΩ 51k~100kΩ -600 ~-150 -1000 ~-150 Operating Temp.Range [℃] [℃] +70 -55~ +155 ※P=Rated power (W), R=Nominal resistance (Ω) Rated Power Ratio(%) ■Derating Curve ■Performance 100 50 0 -55 0 70 Ambient Temp.(℃) 155 Items Characteristics Short-time resistance change Test method JIS C 5201-1 4.13 over load within ±1.0% Rated voltage×2.5 5s Resistance to resistance change JIS C 5201-1 4.18 soldering heat within ±0.5% 260℃ 10s Damp heat resistance change JIS C 5201-1 4.24 (steady state) within ±5.0% 40℃、95%RH、1,000h Endurance resistance change JIS C 5201-1 4.25.1 (rated load) within ±5.0% 70℃、1,000h 1.5hON, 0.5hOFF cycle 1.5hON, 0.5hOFF cycle "Type" indicates the product No., which is not the trademark. Apr. 1, 2015 HOKURIKU Specifications are subject to change without notice.