MINIATURE GLAZED METAL FILM FIXED RESISTORS Model No. HGS ■Constructions and Dimensions 3 2 4 7 6 5 d 1 D L ■Feature ① ② ③ ・This resistor (HGS) is miniature & lightweight type of High Resistance Fixed Resistor (HMGL). ・It is suitable for replacement of Miniature Metal Film Fixed lead wire insulation coat color code Resistor (RNM), Miniature Carbon Film Fixed Resistor (NAT), ④ ⑤ ⑥ herical cutting groove conductive film ceramic base ⑦ cap Dimensions(mm) Type D d ・Available with the tolerance of ±1.0%, ±5.0%. HGS1/4W 3.4 max. 1.7±0.3 0.5±0.05 ・Body color : Ivory HGS1/2W 6.4±0.8 2.3±0.4 0.6±0.1 requiring high resistance range of 100 kΩ or more. L ■Type Designation Ex)HGS1/4 C3 100kΩ FTU HGS 1/4 Type MINIATURE GLAZED METAL FILM FIXED RESISTORS C3 100kΩ F Power Rating T.C.R. Resistance Tolerance Forming, Packaging 1/4：0.25W [ppm/℃] E-24,E-96 series D：±0.5% TU：52mm Axial Taping 1/2：0.5W C3：±100 TU F：±1.0% TP：26mm Axial Taping ※Please refer to General Specifications. ※Please refer to General Specifications. C4：±200 ■Power Rating Max. Oprerational Voltage Dielectric withstanding Voltage Type Power Rating [W] [V] [V] HGS1/4 0.25 250 500 HGS1/2 0.5 350 700 ※Rated Voltage : F Rated Power Ratio(％) J Rated Ambient Temp. [ppm/℃] [℃] [℃] +70 -55～ +155 Operating Temp.Range P・R (P=Rated power (W), R=Nominal resistance (Ω)) ■Performance 100 50 -55 [Ω] T.C.R. 100k～1M 100k～2.2M C3：±100 100k～10M 100k～10M C4：±200 ■Derating Curve 0 Resistance Range 0 70 Ambient Temp.(℃) 155 Items Characteristics Short-time resistance change Test method JIS C 5201-1 4.13 over load within ±0.5% Rated voltage×2.5 5s Resistance to resistance change JIS C 5201-1 4.18 soldering heat within ±0.5% 260℃ 10s Damp heat resistance change JIS C 5201-1 4.24 (steady state) within ±1.5% 40℃、95%RH、1,000h Endurance resistance change JIS C 5201-1 4.25.1 (rated load) within ±2.0% 70℃、1,000h 1.5hON, 0.5hOFF cycle 1.5hON, 0.5hOFF cycle "Type" indicates the product No., which is not the trademark. Apr. 1, 2015 HOKURIKU Specifications are subject to change without notice.