INSULATED HIGH STABILITY FIXED METAL FILM RESISTORS Model No. RTL ■Constructions and Dimensions 3 2 4 6 5 7 d 1 l L lead wire insulation coat color code ④ ⑤ ⑥ D l ■Feature ① ② ③ ・Metal film resistor with high stability and high reliability. ・Available with the tolerance of ±0.5%, ±1.0%, ±2.0%, ±5.0%. ・Body color : Brown herical cutting groove conductive film ceramic base ⑦ cap Dimensions(mm) Type RTL1/4W L D l d 6.4±0.8 2.3±0.4 27 min. 0.6±0.1 RTL1/2W 9.5±1.1 3.5±0.6 38±3 0.65±0.1 RTL1W 14.2±0.8 4.8±0.4 38±3 1.0±0.1 ■Type Designation Ex)RTL1/4 C3 10kΩ FTU RTL Type INSULATED HIGH STABILITY FIXED METAL FILM RESISTORS 1/4 C3 10kΩ F Power Rating T.C.R. Resistance Tolerance Forming, Packaging 1/4:0.25W [ppm/℃] E-24,E-96 series D:±0.5% TU:52mm Axial Taping F:±1.0% TP:26mm Axial Taping ※Please refer to General Specifications. G:±2.0% 1/2:0.5W C2:±50 1:1W C3:±100 C4:±200 TU J:±5.0% No Marking : Bulk ※Please refer to General Specifications. ■Power Rating Dielectric withstanding Voltage T.C.R. Rated Ambient Temp. Operating Temp.Range Type [W] [V] [V] D F,G,J [ppm/℃] [℃] [℃] RTL1/4 0.25 P・R 400 100~100k 10~100k RTL1/2 0.5 P・R 600 100~100k 10~100k +70 RTL1 1.0 P・R 600 100~100k 10~100k C2:±50 C3:±100 C4:±200 -55~ +155 ※Rated Voltage : Rated Voltage ■Performance 100 50 0 -55 [Ω] P・R (P=Rated power (W), R=Nominal resistance (Ω)) ■Derating Curve Rated Power Ratio(%) Resistance Range Power Rating 0 70 Ambient Temp.(℃) 155 Items Characteristics Short-time resistance change Test method JIS C 5201-1 4.13 over load within ±0.5% Rated voltage×2.5 5s Resistance to resistance change JIS C 5201-1 4.18 soldering heat within ±0.5% 260℃ 10s Damp heat resistance change JIS C 5201-1 4.24 (steady state) within ±1.5% 40℃、95%RH、1,000h Endurance resistance change JIS C 5201-1 4.25.1 (rated load) within ±2.0% 70℃、1,000h 1.5hON, 0.5hOFF cycle 1.5hON, 0.5hOFF cycle "Type" indicates the product No., which is not the trademark. Apr. 1, 2015 HOKURIKU Specifications are subject to change without notice.