4GBJ406L GLASS PASSIVATED REVERSE VOLTAGE FORWARD CURRENT BRIDGE RECTIFIERS - 600Volts - 4.0 Amperes 4GBJ FEATURES ●Surge overload rating -150 amperes peak .995(25.3) .983(24.7) technique .118(3.0)*45° .157 (4.0) ●Mounting postition:Any ~ - ~ .150(3.8) .130(3.3) + .074(1.9) .059(1.5) .057(1.45) .041(1.05) .083(2.1) .069(1.7) .043(1.1) .035(0.9) .189(4.8) .173(4.4) .150(3.8) .134(3.4) .114(2.9) .098(2.5) .708(18.0) .669(17.0) classification 94V-0 .602(15.3) .578(14.7) ●The plastic material has UL flammability .382(9.7) .366(9.3) ? .134(3.4) ? .122(3.1) ●Reliable low cost construction utilizing molded plastic ? .134(3.4) ? .122(3.1) ● Ideal for printed circuit board .031(0.8) .023(0.6) .303(7.7) .303(7.7) .303(7.7) SPACING .287(7.3) .287(7.3) .287(7.3) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL 4GBJ406L UNIT Maximum Recurrent Peak Reverse Voltage VRRM 600 V Maximum RMS Voltage VRMS 420 V Maximum DC Blocking Voltage VDC 600 V Maximum Average Forward (with heatsink Note 2) Rectified Current @ TC=100℃ (without heatsink) Peak Forward Surge Current 8.3ms Single Half Sine-Wave I(AV) 4.0 2.4 A IFSM 135 A VF 0.92 V Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 4.0A DC Maximum DC Reverse Current @ TJ=25℃ at Rated DC Blocking Voltage @ TJ=125℃ IR 10.0 127 μA I2t Rating for Fusing (t<8.3ms) I2t 76 A2s Typical Junction Capacitance Per Element (Note1) CJ 45 pF RθJC 2.2 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Typical Thermal Resistance Operating Temperature Range Storage Temperature Range NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 50mm*50mm*1.6mm Cu plate heatsink. 3.The typical data above is for reference only(典型值仅供参考). REV. 2, 18-Aug-2015 RATING AND CHARACTERTIC CURVES 4GBJ406L FIG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 5.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE WITH HEATSINK 4.0 3.0 WITHOUT HEATSINK 2.0 1.0 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD 0.0 50 25 75 100 125 150 150 TJ=25°C HALF-SINE-WAVE (JEDEC METHOD) 125 100 75 50 25 SINGLE HALF-SINE-WAVE (JEDEC METHOD) 0 5 2 0 CASE TEMPERATURE, °C 10 20 50 100 NUMBER OF CYCLETS AT 60Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3-TYPICAL FORWARD CHARACTERISTICS 20.0 1000 TJ=150°C INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, AMPERES 10.0 1.0 0.1 TJ=25°C 0.01 0 0.2 0.4 0.8 0.6 1.0 1.2 TJ=125°C 100 TJ=100°C 10 TJ=25°C 1.0 1.4 INSTANTANEOUS FORWARD VOLTAGE. VOLTS 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) FIG.5-TYPICAL JUNCTION CAPACITANCE CAPACITANCE,(pF) 100 50 TJ=25°C,f=1MHZ 10 1.0 10.0 100 REVERSE VOLTAGE,(VOLTS) The cruve graph is for reference only, can't be the basis for judgment(曲线图仅供参考)! REV. 2, 18-Aug-2015