RS201 thru RS207 REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 2.0 Amperes SILICON BRIDGE RECTIFIERS RS-2 .709(19.0) .669(17.0) FEATURES ● Surge overload rating -50 amperes peak ●Ideal for printed circuit board .551(14.0) .512(13.0) ●Reliable low cost construction utilizong molded plastic .610(15.5) .571(14.5) technique results in expensive product ●Mounting position :Any ●Lead: Sliver plated copper lead .035(0.9)DIA .028(0.7)TYP. .750 MIN. (19.0) .160(4.1) .140(3.6) .276(7.0) .236(6.0) .148(3.75) .108(2.75) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL RS201 RS202 RS203 RS204 RS205 RS206 RS207 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375″（9.5mm) Lead Lengths @TA=40 ℃ I(AV) 2.0 A IFSM 50 A I2t 15.0 A2s VF 1.1 V Peak Forward Surage Current , 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) I2t Rating for Fusing (t＜8.3ms) Maximum Forward Voltage Drop Per Element at 2.0A Peak Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage TA=100℃ Typical Junction Capacitance Per Element (Note1) Operating Temperature Range Storage Temperature Range 10.0 uA 1.0 mA CJ 30 pF TJ -55 to +125 ℃ TSTG -55 to +125 ℃ IR Note:1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. ~ 249 ~ RATING AND CHARACTERISTIC CURVES RS201 thru RS207 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 2.0 PEAK FORWARD SURGE CURRENT AMPERES BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES FIG.1-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0 100 50 60 50 40 30 T A=25℃ SINGLE SINE-WAVE JEDEC METHOD 20 10 0 150 10 1 AMBIENT TEMPERATURE ,℃ NUMBER OF CYCLES AT 60HZ FIG.4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 6.0 10 7.0 5.0 3.0 2.0 INSTANTANEOUS FORWARD CURRENT, AMPERES 10 4.0 T J=100℃ 2.0 1.0 0.6 0.4 0.2 T J=25℃ 0.02 0.01 0 20 40 60 80 100 120 1.0 0.7 0.5 0.3 0.2 T J=25℃ PULSE WIDTH:300μS 1% DUTY CYCLE 0.1 0.07 0.05 0.03 0.02 0.01 0 140 INSTANTANEOUS FORWARD VOLTAGE. 0.2 0.4 0.6 0.8 1.0 100 60 40 20 10 6.0 4.0 T J=25℃, f=1MHZ Vsig=50m p-p 2.0 1.0 0.1 0.2 0.4 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE. VOLTS FIG.5-TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT CAPACITANCE,(pF) INSTANTANEOUS REVERSE CURRENT MICROAMPERES FIG.3-TYPICAL FORWARD CHARACTERISTICS 0.1 0.06 0.04 100 1.0 2.0 4.0 REVERSE VOLTAGE,VOLTS ~ 250 ~ 10 20 40 100