2WO/2WOM SERIES REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 2.0 Amperes SILICON BRIDGE RECTIFIERS WOB WOBM .366(9.3) .350(8.9) FEATURES ● Surge overload rating -60 amperes peak .386(9.8) .354(9.0) .220(5.6) .200(5.1) ●Ideal for printed circuit board .181(4.6) .150(3.8) ●Reliable low cost construction utilizing molded plastic technique results in expensive product ●Mounting position:Any 1.1 (27.9) MIN ●Lead: Sliver plated copper lead 1.0 (25.4) MIN 1.0 (25.4) MIN 1.1 (27.9) MIN .032(0.81) POS. .028(0.71) LEAD .032(0.81) .028(0.71) POS. LEAD .220(5.6) .180(4.6) .220(5.6) .180(4.6) .220(5.6) .180(4.6) SPACING .220(5.6) .180(4.6) SPACING Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL 2W005 2W01 2W005M 2W01M 2W02 2W04 2W06 2W08 2W10 2W02M 2W04M 2W06M 2W08M 2W10M UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375″（9.5mm) Lead Lengths @TA=25 ℃ I(AV) 2.0 A IFSM 60 A I2t 15.0 A2s VF 1.1 V Peak Forward Surge Current , 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) I2t Rating for Fusing (t＜8.3ms) Maximum Forward Voltage Drop Per Element at 2.0A Peak Maximum DC Reverse Current at Rated TJ=25℃ DC Blocking Voltage TJ=100℃ Typical Junction Capacitance Per Element (Note1) Operating Temperature Range Storage Temperature Range 10.0 μA 1.0 mA CJ 30 pF TJ -55 to +125 ℃ TSTG -55 to +150 ℃ IR Note:1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. ~ 312 ~ RATING AND CHARACTERISTIC CURVES 2WO/2WOM SERIES FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 2.0 60 PEAK FORWARD SURGE CURRENT, AMPERES BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES FIG.1-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0 100 50 50 40 30 20 SINGLE SINE-WAVE JEDEC METHOD 10 0 150 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE ,℃ FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT AMPERES 10.0 T J=100℃ 1.0 0.1 T J=25℃ 0.01 0 20 40 60 80 100 120 140 T J=25℃ TYPICAL DISTRIBUTION 1.0 0.1 0.01 0.4 PERCENT OF RATED PEAK REVERSE VOLTAGE 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE. VOLTS FIG.5-TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 100 60 40 CAPACITANCE,(pF) INSTANTANEOUS REVERSE CURRENT, MICROAMPERRES 10 20 10 6.0 4.0 T J=25℃, f=1MHZ Vsig=50m p-p 2.0 1.0 0.1 0.2 0.4 1.0 2.0 4.0 REVERSE VOLTAGE,VOLTS ~ 313 ~ 10 20 40 100