4GBJ1006L GLASS PASSIVATED REVERSE VOLTAGE FORWARD CURRENT BRIDGE RECTIFIERS - 600Volts - 10 Amperes FEATURES 4GBJ ●Low forward voltage drop,high current capability .995(25.3) .983(24.7) ●Reliable low cost construction utilizing molded plastic .157 (4.0) classification 94V-0 ~ - ~ .150(3.8) .130(3.3) + .074(1.9) .059(1.5) .057(1.45) .041(1.05) .083(2.1) .069(1.7) .043(1.1) .035(0.9) .189(4.8) .173(4.4) .150(3.8) .134(3.4) .114(2.9) .098(2.5) .708(18.0) .669(17.0) .118(3.0)*45° ●The plastic material has UL flammability .602(15.3) .578(14.7) technique results in inexpensive product .382(9.7) .366(9.3) ? .134(3.4) ? .122(3.1) ● Ideal for printed circuit board ? .134(3.4) ? .122(3.1) ●Rating to 600V PRV .031(0.8) .023(0.6) .303(7.7) .303(7.7) .303(7.7) SPACING .287(7.3) .287(7.3) .287(7.3) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL 4GBJ1006L UNIT Maximum Recurrent Peak Reverse Voltage VRRM 600 V Maximum RMS Voltage VRMS 420 V Maximum DC Blocking Voltage VDC 600 V Maximum Average Forward (with heatsink Note 2) Rectified Current @ TC=110℃ (without heatsink) Peak Forward Surge Current 8.3ms Single Half Sine-Wave I(AV) 10.0 3.0 A IFSM 210 A VF 0.92 V Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 5.0A DC Maximum DC Reverse Current @ TJ=25℃ at Rated DC Blocking Voltage @ TJ=125℃ IR 10.0 127 μA I2t Rating for Fusing (t<8.3ms) I2t 183 A2s Typical Junction Capacitance Per Element (Note1) CJ 55 pF RθJC 1.4 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Typical Thermal Resistance Operating Temperature Range Storage Temperature Range NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 150mm*150mm*1.6mm Cu plate heatsink. 3.The typical data above is for reference only(典型值仅供参考). REV. 2, 18-Aug-2015 RATING AND CHARACTERTIC CURVES 4GBJ1006L FIG.1-FORWARD CURRENT DERATING CURVE FLG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 225 WITH HEATSINK PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT AMPERES 10.0 8.0 6.0 WITHOUT HEATSINK 4.0 2.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 1.0 0 20 40 60 80 100 120 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 200 150 100 140 50 0 5 2 0 10 20 50 100 NUMBER OF CYCLETS AT 60Hz CASE TEMPERATURE, °C FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL JUNCTION CAPACITANCE 20.0 100 INSTANTANEOUS FORWARD CURRENT, AMPERES CAPACITANCE,(pF) 10.0 10 TJ=25°C,f=1MHZ 1.0 1.0 10.0 1.0 0.1 TJ = 25°C PULSE WIDTH 300us 0.01 100 0 REVERSE VOLTAGE,(VOLTS) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE. VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT ,(uA) 1000 TJ=125°C 100 TJ=100°C 10 TJ=50°C 1.0 TJ=25°C 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) The cruve graph is for reference only, can't be the basis for judgment(曲线图仅供参考)! REV. 2, 18-Aug-2015