Data Sheet Mechanical Drawing 10.92 MAX IN08141 YYWW ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 7.2 MAX Customer Part Number Revision Description Date Reference Doc Control # Issue (For ICE use only) Item 7.5 MAX General Information 0.1 max IN08141 for coplanarity 0 Inductor (a) JUL-21-2009 2.5 +/- 0.25(x2) ---Specification Pins Spec Test Condition Inductance @0Adc S-F Inductance @Isat at 25degC S - F 510 nH +/- 15% 347 nH min DCR S-F Isat at 25degC S-F 17 Adc max Isat at +125degC S-F 14 Adc max Idc S-F 39 Adc max 1.6 +/- 0.1 (b) unit:mm Sample Test Data 100 kHz, 1Vrms, series 100 kHz, 1Vrms, series (17 Adc) 0.47 mOhm +/- 10% +25 deg C Recommended PCB Layout Schematic Remark 1. S 2. 3.5 2.5 11.2 3. 4. unit:mm F 5. 6. Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 0 Description Initial release Isat is the current at which the inductance drops by 20%. Idc is the current at which the temperature of the part increases by 50 deg C. Inductance vs. Current Curve, Temperature vs. Current Curve and DCR vs. temperature Curve as attached. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. This is RoHS compliant product. The max operating temperature is 130degC (ambient + temperature rise). PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/7/21 2009/7/21 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN08141 Inductance vs. Current 100.0 % Inductance 90.0 +25 degC 80.0 70.0 +125 degC 60.0 50.0 40.0 0 2 4 6 8 10 12 14 16 18 20 Current (A) Temperature(degC) Temperature VS Current 100 80 60 40 20 0 0 10 20 30 40 50 Current (DC) DCR(mOhm) DCR VS temperature 0.750 0.730 0.710 0.690 0.670 0.650 0.630 0.610 0.590 0.570 0.550 0.530 0.510 0.490 0.470 20 40 60 80 100 120 140 160 180 temperature (deg C) PAGE 2 OF 2