Data Sheet Mechanical Drawing 13.1 max ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 IN08124 YYWW 3.8 13.0 max General Information Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) IN08124 0 Inductor AUG-07-2009 ---- Item 8.0 max (a) unit:mm Specification Spec Pins Sample Test Data Test Condition Inductance @0Adc S-F 320 nH +/- 10% Inductance @Isat at 25degC S-F 230 nH min DCR S-F Isat at 25degC S-F 48 Adc max Isat at +125degC S-F 40 Adc max 100 kHz, 1Vrms, series 100 kHz, 1Vrms, series (48 Adc) 0.45 mOhms +/- 10% +25 deg C Recommended PCB Layout 3.5 Schematic S 6.0 13.5 Remark 1. Isat is the current at which the inductance drops by 20%. 2. Inductance vs. Current Curve as attached. 3. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. 4. This is RoHS compliant product. unit:mm 5. F Sample approval is required before release to production. Sample specifications take precedence over customer specifications. (b) 2.5(X2) Rev. 0 Description Initial release Operating temperature is 130degC max (ambient + temperature rise). PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN08124 Inductance vs. Current 100.0 +25 degC % Inductance 90.0 +125 degC 80.0 70.0 60.0 50.0 40.0 0 5 10 15 20 25 30 35 40 45 50 Current (A) PAGE 2 OF 2